mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [Bug 503] New: Hyper Threading technology
@ 2003-03-26 15:32 Martin J. Bligh
  0 siblings, 0 replies; only message in thread
From: Martin J. Bligh @ 2003-03-26 15:32 UTC (permalink / raw)
  To: linux-kernel

http://bugme.osdl.org/show_bug.cgi?id=503

           Summary: Hyper Threading technology
    Kernel Version: 2.5.65
            Status: NEW
          Severity: low
             Owner: rml@tech9.net
         Submitter: koch@dfki.uni-kl.de


Distribution: SuSE 8.0
Hardware Environment: Tyan Thunder i860 S2603, dual XEON 2.8GHz, 512MB RDRAM
Software Environment:
Problem Description: System hung after enabling HT in BIOS

Steps to reproduce: I just installed SuSE 8.0 on the machine, downloaded the
kernel, configured it (i think to sane settings), put it into /boot and ran
lilo. After reboot, i did some benchmarking and the machine seemed to run
fine. When i rebooted a second time and enabled HT in the BIOS, the machine
came up but hung after i logged in (before i could run any benchmark). I
tried everything, but had to use hardware reset. I didn't investigate this
further because the machine had to be finished yesterday.

And now something completely different: Did i say benchmarking? No, not
really. I did compile the 2.5.65 kernel with several different 'make -j'
options to see the impact of HT and if i should enable or disable it and
what the benefit of using a 2.5 kernel would be. I know that compiling a
kernel is not exactly a benchmark, but since the machine will be used in
software development under C i thought it might reveal some issues anyway.
What i found out is interesting (at least for me) and did not meet my (and
other peoples) expectations:
The penalty of using the 2.5.65 kernel (4.6%) is bigger than the penalty of
enabling HT on the 2.4.18 that came with SuSE 8.0 (only 2%). The gain of
using HT on the 2.4.18 is quite astonishing: about 14%.
Here are my numbers:

2 x XEON 2.8GHz (HT enabled)    SuSE 8.0 Kernel 2.4.18
                                real            user            sys
        make            -       243.6           229.0           23.6
        make -j 2       -       132.9           247.6           26.2
        make -j 3       -       120.8           335.3           30.8
        make -j 4       -       115.8           406.1           34.6
        make -j 5       -       116.0           406.0           34.8

2 x XEON 2.8GHz (HT disabled)   SuSE 8.0 Kernel 2.4.18

        make            -       239.0           223.8           22.3
        make -j 2       -       132.3           229.7           23.4
        make -j 3       -       132.8           231.3           24.5

2 x XEON 2.8GHz (HT enabled)    SuSE 8.0 Kernel 2.5.65

        --------- System hung before any benchmark was run ---------

2 x XEON 2.8GHz (HT disabled)   SuSE 8.0 Kernel 2.5.65

        make            -       250.5           229.9           25.0
        make -j 2       -       134.9           235.8           27.1
        make -j 3       -       136.7           237.3           27.5


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2003-03-26 15:21 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-26 15:32 [Bug 503] New: Hyper Threading technology Martin J. Bligh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®