From: Heiner Kallweit <hkallweit1@gmail.com>
To: Fabio Baltieri <fabio.baltieri@gmail.com>,
Michael Zimmermann <sigmaepsilon92@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
nic_swsd@realtek.com, Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] r8169: add support for RTL8127ATF
Date: Fri, 21 Nov 2025 00:17:33 +0100 [thread overview]
Message-ID: <22b15123-b134-467c-835c-c9e0f1e19e29@gmail.com> (raw)
In-Reply-To: <aR2baZuFBuA7Mx_x@google.com>
On 11/19/2025 11:26 AM, Fabio Baltieri wrote:
> On Wed, Nov 19, 2025 at 08:00:01AM +0100, Michael Zimmermann wrote:
>> I've also done some testing with the out-of-tree driver:
>> - (my normal setup) a DAC between the rt8127 and a 10G switch works just fine.
>> - RJ45 10G modules on both sides works fine, but HwFiberModeVer stays
>> at 1 even after reloading the driver.
>> - RJ45 1G modules on both sides works after "ethtool -s enp1s0 speed
>> 1000 duplex full autoneg on", but you have to do that while connected
>> via 10G because that driver is buggy and returns EINVAL otherwise.
>> HwFiberModeVer was 1 as well after reloading the driver.
>
> You are right, did some more extensive testing and it seems like
> switching speed is somewhat unreliable.
>
> I've also bumped into
> https://lore.kernel.org/netdev/cc1c8d30-fda0-4d3d-ad61-3ff932ef0222@gmail.com/
> and sure enough this is affected too, it also does not survive suspend
> without the wol flag, but more importantly I've found that the serdes
> has to be reconfigured on resume, so I need to send a v2 moving some
> code around.
>
Could you please test whether the following fixes the chip hang on suspend / shutdown?
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index de304d1eb..97dbe8f89 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1517,11 +1517,20 @@ static enum rtl_dash_type rtl_get_dash_type(struct rtl8169_private *tp)
static void rtl_set_d3_pll_down(struct rtl8169_private *tp, bool enable)
{
- if (tp->mac_version >= RTL_GIGA_MAC_VER_25 &&
- tp->mac_version != RTL_GIGA_MAC_VER_28 &&
- tp->mac_version != RTL_GIGA_MAC_VER_31 &&
- tp->mac_version != RTL_GIGA_MAC_VER_38)
- r8169_mod_reg8_cond(tp, PMCH, D3_NO_PLL_DOWN, !enable);
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_24:
+ case RTL_GIGA_MAC_VER_28:
+ case RTL_GIGA_MAC_VER_31:
+ case RTL_GIGA_MAC_VER_38:
+ break;
+ case RTL_GIGA_MAC_VER_80:
+ r8169_mod_reg8_cond(tp, PMCH, D3_NO_PLL_DOWN, true);
+ break;
+ default:
+ r8169_mod_reg8_cond(tp, PMCH, D3HOT_NO_PLL_DOWN, true);
+ r8169_mod_reg8_cond(tp, PMCH, D3COLD_NO_PLL_DOWN, !enable);
+ break;
+ }
}
static void rtl_reset_packet_filter(struct rtl8169_private *tp)
--
2.52.0
next prev parent reply other threads:[~2025-11-20 23:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 19:16 Fabio Baltieri
2025-11-17 19:37 ` Andrew Lunn
2025-11-18 11:08 ` Fabio Baltieri
2025-11-18 19:31 ` Andrew Lunn
2025-11-18 20:02 ` Heiner Kallweit
2025-11-18 20:20 ` Fabio Baltieri
2025-11-18 21:31 ` Michael Zimmermann
2025-11-18 22:01 ` Fabio Baltieri
2025-11-19 7:00 ` Michael Zimmermann
2025-11-19 10:26 ` Fabio Baltieri
2025-11-20 23:17 ` Heiner Kallweit [this message]
2025-11-21 12:09 ` Fabio Baltieri
2025-11-21 13:09 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=22b15123-b134-467c-835c-c9e0f1e19e29@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fabio.baltieri@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
--cc=sigmaepsilon92@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®