[PATCH v3 00/12] Enable more nodes for the Xperia 10 III

[PATCH v3 00/12] Enable more nodes for the Xperia 10 III

[erebion]

Enable some more nodes for the Xperia 10 III.

Signed-off-by: erebion <erebion@erebion.eu>
---
Changes in v3:
- re-order some properties, generic properties first, then qcom,*
- &pm6150l_flash: fix led-max-microamp value
- rename touch-en-regulator to regulator-touch-en (to keep any future fixed-regulator sorted together as well)
- Bluetooth: remove incorrect property that does not exist
- Bluetooth, &qup_uart1_cts: do not overwrite a bias-disable with bias-bus-hold as it is not necessary
- &pm7250b_vbus: fix regulator-max-microamp value
- Remove comment from reserved-memory as suggested by Konrad Dybcio
- Squashed the patch enabling IPA into the one enabling ADSP, CDSP & MPSS, as suggested by Luca Weiss (therefore not adding the Reviewed-by from Konrad Dybcio)
- Configure thermals for PMK8350, PM7250B, PM650L as used in pdx213
- Enable remaining i2c busses
- Link to v2: https://patch.msgid.link/20260926-pdx213-upstream-3-v2-0-b4612e3eb536@erebion.eu

Changes in v2:
- Remove panel_reset_pin that shouldn't be part of this patch series
- Remove incorrect reg from mpss
- Fix conflicting bias pinctrl, as pinctrl nodes from sm6350.dtsi already contain a bias-* property
- Fix incorrect unit name in &pmk8350_vadc
- Link to v1: https://patch.msgid.link/20260926-pdx213-upstream-3-v1-0-1609c18b5c1d@erebion.eu

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

---
erebion (12):
      arm64: dts: qcom: sm6350-lena: Add flash LED
      arm64: dts: qcom: sm6350-lena: rename touch-en-regulator
      arm64: dts: qcom: sm6350-lena: Add qcom,rmtfs-mem node
      arm64: dts: qcom: sm6350-lena: Enable ADSP, CDSP, IPA & MPSS
      arm64: dts: qcom: sm6350-lena: Enable Bluetooth
      arm64: dts: qcom: sm6350-lena: Enable wifi
      arm64: dts: qcom: sm6350-lena: Enable PM7250B
      arm64: dts: qcom: sm6350-lena: Enable PMK8350
      arm64: dts: qcom: sm6350-lena: Add PMK8350 thermals
      arm64: dts: qcom: sm6350-lena: Add PM7250B thermals
      arm64: dts: qcom: sm6350-lena: Add PM6150L thermals
      arm64: dts: qcom: sm6350-lena: enable remaining i2c busses

 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 503 ++++++++++++++++++++-
 1 file changed, 502 insertions(+), 1 deletion(-)
---
base-commit: e5e04726cdd043e309677071ab1b65a4b18f422b
change-id: 20260829-pdx213-upstream-3-d0b80f749b5b

Best regards,
--  
erebion <erebion@erebion.eu>

[PATCH v3 01/12] arm64: dts: qcom: sm6350-lena: Add flash LED

[erebion]

Add a node for the camera flash LED found on the Xperia 10 III

Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 .../boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 6e2bbf4f060ac..6942a117d41cf 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -4,9 +4,11 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm6350.dtsi"
+#include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 
 / {
@@ -302,6 +304,19 @@ touchscreen@48 {
 	};
 };
 
+&pm6150l_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <1500000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm6350_gpios {
 	vol_down_n: vol-down-n-state {
 		pins = "gpio2";

-- 
2.53.0

[PATCH v3 02/12] arm64: dts: qcom: sm6350-lena: rename touch-en-regulator

[erebion]

rename touch-en-regulator -> regulator-touch-en, to
keep any future fixed-regulator sorted together

Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 6942a117d41cf..9295b2e6f179f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -46,7 +46,16 @@ key-volume-down {
 		};
 	};
 
-	touch_en_vreg: touch-en-regulator {
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch_en_vreg: regulator-touch-en {
 		compatible = "regulator-fixed";
 		regulator-name = "touch_en_vreg";
 		gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;

-- 
2.53.0

Re: [PATCH v3 02/12] arm64: dts: qcom: sm6350-lena: rename touch-en-regulator

[Konrad Dybcio]

On 11/2/26 12:32 AM, erebion wrote:
> rename touch-en-regulator -> regulator-touch-en, to
> keep any future fixed-regulator sorted together
> 
> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: erebion <erebion@erebion.eu>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v3 03/12] arm64: dts: qcom: sm6350-lena: Add qcom,rmtfs-mem node

[erebion]

Adds the qcom,rmtfs-mem node required for the modem

Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 9295b2e6f179f..1e89c9798edf8 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -4,6 +4,7 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -63,6 +64,17 @@ touch_en_vreg: regulator-touch-en {
 
 		vin-supply = <&pm6350_l6>;
 	};
+
+	reserved-memory {
+		memory@fe901000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xfe901000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
 };
 
 &apps_rsc {

-- 
2.53.0

Re: [PATCH v3 03/12] arm64: dts: qcom: sm6350-lena: Add qcom,rmtfs-mem node

[Konrad Dybcio]

On 11/2/26 12:32 AM, erebion wrote:
> Adds the qcom,rmtfs-mem node required for the modem
> 
> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: erebion <erebion@erebion.eu>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v3 04/12] arm64: dts: qcom: sm6350-lena: Enable ADSP, CDSP, IPA & MPSS

[erebion]

Enable the ADSP, CDSP, IPA and MPSS (Modem) nodes for the Xperia 10 III.

Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 1e89c9798edf8..ce351a3fa8727 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -77,6 +77,12 @@ memory@fe901000 {
 	};
 };
 
+&adsp {
+	firmware-name = "qcom/sm6350/sony/pdx213/adsp.mbn";
+
+	status = "okay";
+};
+
 &apps_rsc {
 	regulators-0 {
 		compatible = "qcom,pm6350-rpmh-regulators";
@@ -300,6 +306,12 @@ pm6150l_bob: bob {
 	};
 };
 
+&cdsp {
+	firmware-name = "qcom/sm6350/sony/pdx213/cdsp.mbn";
+
+	status = "okay";
+};
+
 &gpi_dma0 {
 	status = "okay";
 };
@@ -325,6 +337,20 @@ touchscreen@48 {
 	};
 };
 
+&ipa {
+	firmware-name = "qcom/sm6350/sony/pdx213/ipa_fws.mbn";
+	memory-region = <&pil_ipa_fw_mem>;
+	qcom,gsi-loader = "self";
+
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/sm6350/sony/pdx213/modem.mbn";
+
+	status = "okay";
+};
+
 &pm6150l_flash {
 	status = "okay";
 

-- 
2.53.0

Re: [PATCH v3 04/12] arm64: dts: qcom: sm6350-lena: Enable ADSP, CDSP, IPA & MPSS

[Konrad Dybcio]

On 11/2/26 12:32 AM, erebion wrote:
> Enable the ADSP, CDSP, IPA and MPSS (Modem) nodes for the Xperia 10 III.
> 
> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: erebion <erebion@erebion.eu>
> ---
>  .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 1e89c9798edf8..ce351a3fa8727 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -77,6 +77,12 @@ memory@fe901000 {
>  	};
>  };
>  
> +&adsp {
> +	firmware-name = "qcom/sm6350/sony/pdx213/adsp.mbn";

FWIW all other devices have an uppercase 'S' for Sony here, I'd
like to keep that consistent

Konrad

[PATCH v3 05/12] arm64: dts: qcom: sm6350-lena: Enable Bluetooth

[erebion]

Configure the required regulators for Bluetooth and enable it on the
Xperia 10 III.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 96 ++++++++++++++++++++++
 1 file changed, 96 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index ce351a3fa8727..f1958f4bad05a 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -19,6 +19,10 @@ / {
 	qcom,msm-id = <434 0x10000>, <459 0x10000>;
 	qcom,board-id = <0x1000b 0>;
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -387,6 +391,32 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+/* UART1: HS UART for Bluetooth */
+&qup_uart1_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	/delete-property/ bias-pull-down;
+	bias-disable;
+};
+
+&qup_uart1_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&qup_uart1_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	/delete-property/ bias-pull-up;
+	bias-disable;
+};
+
 &sdc2_off_state {
 	sd-cd-pins {
 		pins = "gpio94";
@@ -430,6 +460,72 @@ ts_int_default: ts-int-default-state {
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	qup_uart1_sleep_cts: qup-uart1-sleep-cts-state {
+		pins = "gpio61";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart1_sleep_rts: qup-uart1-sleep-rts-state {
+		pins = "gpio62";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart1_sleep_rx: qup-uart1-sleep-rx-state {
+		pins = "gpio64";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart1_sleep_tx: qup-uart1-sleep-tx-state {
+		pins = "gpio63";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+};
+
+&uart1 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <&tlmm 64 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&pm6350_l11>;
+		vddxo-supply = <&pm6350_l7>;
+		vddrf-supply = <&pm6150l_l2>;
+		vddch0-supply = <&pm6150l_l10>;
+		firmware-name = "crnv32u.bin";
+	};
 };
 
 &usb_1 {

-- 
2.53.0

[PATCH v3 06/12] arm64: dts: qcom: sm6350-lena: Enable wifi

[erebion]

Configure regulators and enable it for the Xperia 10 III

Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index f1958f4bad05a..1b54d9869855e 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -552,3 +552,13 @@ &usb_1_qmpphy {
 
 	status = "okay";
 };
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6350_l4>;
+	vdd-1.8-xo-supply = <&pm6350_l7>;
+	vdd-1.3-rfa-supply = <&pm6150l_l2>;
+	vdd-3.3-ch0-supply = <&pm6150l_l10>;
+	vdd-3.3-ch1-supply = <&pm6150l_l11>;
+
+	status = "okay";
+};

-- 
2.53.0

[PATCH v3 07/12] arm64: dts: qcom: sm6350-lena: Enable PM7250B

[erebion]

Enable PM7250B and some components on it for the Xperia 10 III.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 1b54d9869855e..61e191133cb4f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -4,6 +4,10 @@
  */
 /dts-v1/;
 
+/* PM7250B is configured to use SID2/3 */
+#define PM7250B_SID 2
+#define PM7250B_SID1 3
+
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -11,6 +15,7 @@
 #include "sm6350.dtsi"
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
+#include "pm7250b.dtsi"
 
 / {
 	model = "Sony Xperia 10 III";
@@ -383,6 +388,49 @@ &pm6350_resin {
 	status = "okay";
 };
 
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "charger_skin_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "conn_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm7250b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.53.0

Re: [PATCH v3 07/12] arm64: dts: qcom: sm6350-lena: Enable PM7250B

[Konrad Dybcio]

On 11/2/26 12:32 AM, erebion wrote:
> Enable PM7250B and some components on it for the Xperia 10 III.
> 
> Signed-off-by: erebion <erebion@erebion.eu>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v3 08/12] arm64: dts: qcom: sm6350-lena: Enable PMK8350

[erebion]

Configure and enable nodes for PMK8350 on the Xperia 10 III.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 61e191133cb4f..246a290e44f77 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -8,7 +8,11 @@
 #define PM7250B_SID 2
 #define PM7250B_SID1 3
 
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
 #include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -16,6 +20,7 @@
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 #include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
 
 / {
 	model = "Sony Xperia 10 III";
@@ -431,6 +436,31 @@ &pm7250b_vbus {
 	status = "okay";
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	channel@644 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.53.0

[PATCH v3 09/12] arm64: dts: qcom: sm6350-lena: Add PMK8350 thermals

[erebion]

Configure the thermals for the xo-thermal thermistor connected to
PMK8350.

The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 246a290e44f77..6d5aa2fce4c0f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -89,6 +89,20 @@ memory@fe901000 {
 			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
+
+	thermal-zones {
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &adsp {

-- 
2.53.0

[PATCH v3 10/12] arm64: dts: qcom: sm6350-lena: Add PM7250B thermals

[erebion]

Configure the thermals for the chg-skin-thermal and conn-therm thermistors connected to
PM7250B.

The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 6d5aa2fce4c0f..4e9707712a651 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -91,8 +91,8 @@ memory@fe901000 {
 	};
 
 	thermal-zones {
-		xo-thermal {
-			thermal-sensors = <&pmk8350_adc_tm 0>;
+		chg-skin-thermal {
+			thermal-sensors = <&pm7250b_adc_tm 0>;
 
 			trips {
 				active-config0 {
@@ -102,6 +102,19 @@ active-config0 {
 				};
 			};
 		};
+
+		conn-thermal {
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
 	};
 };
 

-- 
2.53.0

[PATCH v3 11/12] arm64: dts: qcom: sm6350-lena: Add PM6150L thermals

[erebion]

Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
PM6150L.

Due to hardware constraints we can only register 4 zones with
pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal.

The trip points can really only be considered as placeholders, more
configuration with cooling etc. can be added later.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 202 +++++++++++++++++++++
 1 file changed, 202 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 4e9707712a651..487ef75f2f1de 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -12,7 +12,9 @@
 #define PMK8350_SID 6
 
 #include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -70,6 +72,20 @@ lcdb_dummy: regulator-lcdb-dummy {
 		regulator-boot-on;
 	};
 
+	msm_therm_sensor: thermal-sensor-msm {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
+	rear_cam_sensor: thermal-sensor-rear-cam {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_GPIO6_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
 	touch_en_vreg: regulator-touch-en {
 		compatible = "regulator-fixed";
 		regulator-name = "touch_en_vreg";
@@ -115,6 +131,99 @@ active-config0 {
 			};
 		};
 
+		pa0-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa1-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&rear_cam_sensor>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rfc-flash-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&msm_therm_sensor>;
+
+			trips {
+				trip0 {
+					temperature = <45000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <55000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 };
 
@@ -392,6 +501,99 @@ &mpss {
 	status = "okay";
 };
 
+&pm6150l_gpios {
+	pm6150l_adc_default: adc-default-state {
+		pins = "gpio6", "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pm6150l_adc {
+	pinctrl-0 = <&pm6150l_adc_default>;
+	pinctrl-names = "default";
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "pa_therm1";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		label = "msm_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm0";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@53 {
+		reg = <ADC5_GPIO2_100K_PU>;
+		label = "rear_cam_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		label = "rear_cam_flash_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		label = "quiet_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+};
+
+&pm6150l_adc_tm {
+	status = "okay";
+
+	pa-therm1@0 {
+		reg = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	pa-therm0@1 {
+		reg = <1>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	rear-cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+		};
+
+	quiet-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
 &pm6150l_flash {
 	status = "okay";
 

-- 
2.53.0

[PATCH v3 12/12] arm64: dts: qcom: sm6350-lena: enable remaining i2c busses

[erebion]

Enable all i2c busses where something is connected on this phone. Add
comments as placeholders for which components are still missing.

Signed-off-by: erebion <erebion@erebion.eu>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts    | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 487ef75f2f1de..d2b3aa6e61ab6 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -470,6 +470,21 @@ &gpi_dma1 {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm6350/sony/pdx213/a615_zap.mbn";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PN553 NFC @ 28 */
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -487,6 +502,17 @@ touchscreen@48 {
 	};
 };
 
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* SMB1395 PMIC @ 34 and 35 */
+	/* AW882xx amplifier @ 34 */
+	/* Foursemi FS16xx amplifier @ 35 */
+	/* FSA4480 Analog Audio Switch @ 42 */
+};
+
 &ipa {
 	firmware-name = "qcom/sm6350/sony/pdx213/ipa_fws.mbn";
 	memory-region = <&pil_ipa_fw_mem>;

-- 
2.53.0

Re: [PATCH v3 12/12] arm64: dts: qcom: sm6350-lena: enable remaining i2c busses

[Konrad Dybcio]

On 11/2/26 12:32 AM, erebion wrote:
> Enable all i2c busses where something is connected on this phone. Add
> comments as placeholders for which components are still missing.
> 
> Signed-off-by: erebion <erebion@erebion.eu>
> ---

Many of these are fairly low-hanging fruits

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad