mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: ACPI Devel Maling List <linux-acpi@vger.kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>,
	Toshi Kani <toshi.kani@hp.com>,
	Myron Stowe <myron.stowe@redhat.com>,
	Yijing Wang <wangyijing0307@gmail.com>,
	Jiang Liu <liuj97@gmail.com>
Subject: [PATCH rev.2 5/6] ACPI: Replace struct acpi_bus_ops with enum type
Date: Thu, 13 Dec 2012 23:22:36 +0100	[thread overview]
Message-ID: <2453149.dHvfCJDb1i@vostro.rjw.lan> (raw)
In-Reply-To: <1499423.ez5cZl2uAf@vostro.rjw.lan>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Notice that one member of struct acpi_bus_ops, acpi_op_add, is not
used anywhere any more and the relationship between its remaining
members, acpi_op_match and acpi_op_start, is such that it doesn't
make sense to set the latter without setting the former at the same
time.  Therefore, replace struct acpi_bus_ops with new a enum type,
enum acpi_bus_add_type, with three values, ACPI_BUS_ADD_BASIC,
ACPI_BUS_ADD_MATCH, ACPI_BUS_ADD_START, corresponding to
both acpi_op_match and acpi_op_start unset, acpi_op_match set and
acpi_op_start unset, and both acpi_op_match and acpi_op_start set,
respectively.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/scan.c     |   35 ++++++++++++-----------------------
 include/acpi/acpi_bus.h |   15 ++++++++-------
 2 files changed, 20 insertions(+), 30 deletions(-)

Index: linux/drivers/acpi/scan.c
===================================================================
--- linux.orig/drivers/acpi/scan.c
+++ linux/drivers/acpi/scan.c
@@ -494,7 +494,7 @@ static int acpi_bus_match(struct device
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 	struct acpi_driver *acpi_drv = to_acpi_driver(drv);
 
-	return acpi_dev->bus_ops.acpi_op_match
+	return acpi_dev->add_type >= ACPI_BUS_ADD_MATCH
 		&& !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
 }
 
@@ -580,7 +580,7 @@ static int acpi_device_probe(struct devi
 
 	ret = acpi_bus_driver_init(acpi_dev, acpi_drv);
 	if (!ret) {
-		if (acpi_dev->bus_ops.acpi_op_start)
+		if (acpi_dev->add_type == ACPI_BUS_ADD_START)
 			acpi_start_single_object(acpi_dev);
 
 		if (acpi_drv->ops.notify) {
@@ -1433,7 +1433,7 @@ static void acpi_hot_add_bind(struct acp
 static int acpi_add_single_object(struct acpi_device **child,
 				  acpi_handle handle, int type,
 				  unsigned long long sta,
-				  struct acpi_bus_ops *ops)
+				  enum acpi_bus_add_type add_type)
 {
 	int result;
 	struct acpi_device *device;
@@ -1449,7 +1449,7 @@ static int acpi_add_single_object(struct
 	device->device_type = type;
 	device->handle = handle;
 	device->parent = acpi_bus_get_parent(handle);
-	device->bus_ops = *ops; /* workround for not call .start */
+	device->add_type = add_type;
 	STRUCT_TO_INT(device->status) = sta;
 
 	acpi_device_get_busid(device);
@@ -1502,7 +1502,7 @@ static int acpi_add_single_object(struct
 
 	result = acpi_device_register(device);
 
-	if (device->bus_ops.acpi_op_match)
+	if (device->add_type >= ACPI_BUS_ADD_MATCH)
 		acpi_hot_add_bind(device);
 
 end:
@@ -1526,16 +1526,12 @@ end:
 
 static void acpi_bus_add_power_resource(acpi_handle handle)
 {
-	struct acpi_bus_ops ops = {
-		.acpi_op_start = 1,
-		.acpi_op_match = 1,
-	};
 	struct acpi_device *device = NULL;
 
 	acpi_bus_get_device(handle, &device);
 	if (!device)
 		acpi_add_single_object(&device, handle, ACPI_BUS_TYPE_POWER,
-					ACPI_STA_DEFAULT, &ops);
+					ACPI_STA_DEFAULT, ACPI_BUS_ADD_START);
 }
 
 static int acpi_bus_type_and_status(acpi_handle handle, int *type,
@@ -1604,16 +1600,13 @@ static acpi_status acpi_bus_check_add(ac
 
 	acpi_bus_get_device(handle, &device);
 	if (!device) {
-		struct acpi_bus_ops ops = {
-			.acpi_op_start = !!context,
-			.acpi_op_match = 0,
-		};
-
-		acpi_add_single_object(&device, handle, type, sta, &ops);
+		acpi_add_single_object(&device, handle, type, sta,
+				       ACPI_BUS_ADD_BASIC);
 		if (!device)
 			return AE_CTRL_DEPTH;
 
-		device->bus_ops.acpi_op_match = 1;
+		device->add_type = context ?
+					ACPI_BUS_ADD_START : ACPI_BUS_ADD_MATCH;
 	}
 
 	if (!*return_value)
@@ -1795,10 +1788,6 @@ static int acpi_bus_scan_fixed(void)
 {
 	int result = 0;
 	struct acpi_device *device = NULL;
-	struct acpi_bus_ops ops = {
-		.acpi_op_start = 1,
-		.acpi_op_match = 1,
-	};
 
 	/*
 	 * Enumerate all fixed-feature devices.
@@ -1807,7 +1796,7 @@ static int acpi_bus_scan_fixed(void)
 		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_POWER_BUTTON,
 						ACPI_STA_DEFAULT,
-						&ops);
+						ACPI_BUS_ADD_START);
 		device_init_wakeup(&device->dev, true);
 	}
 
@@ -1815,7 +1804,7 @@ static int acpi_bus_scan_fixed(void)
 		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_SLEEP_BUTTON,
 						ACPI_STA_DEFAULT,
-						&ops);
+						ACPI_BUS_ADD_START);
 	}
 
 	return result;
Index: linux/include/acpi/acpi_bus.h
===================================================================
--- linux.orig/include/acpi/acpi_bus.h
+++ linux/include/acpi/acpi_bus.h
@@ -63,6 +63,13 @@ acpi_get_physical_device_location(acpi_h
 #define ACPI_BUS_FILE_ROOT	"acpi"
 extern struct proc_dir_entry *acpi_root_dir;
 
+enum acpi_bus_add_type {
+	ACPI_BUS_ADD_BASIC = 0,
+	ACPI_BUS_ADD_MATCH,
+	ACPI_BUS_ADD_START,
+	ACPI_BUS_ADD_TYPE_COUNT
+};
+
 enum acpi_bus_removal_type {
 	ACPI_BUS_REMOVAL_NORMAL = 0,
 	ACPI_BUS_REMOVAL_EJECT,
@@ -95,12 +102,6 @@ typedef int (*acpi_op_bind) (struct acpi
 typedef int (*acpi_op_unbind) (struct acpi_device * device);
 typedef void (*acpi_op_notify) (struct acpi_device * device, u32 event);
 
-struct acpi_bus_ops {
-	u32 acpi_op_add:1;
-	u32 acpi_op_start:1;
-	u32 acpi_op_match:1;
-};
-
 struct acpi_device_ops {
 	acpi_op_add add;
 	acpi_op_remove remove;
@@ -284,7 +285,7 @@ struct acpi_device {
 	struct acpi_driver *driver;
 	void *driver_data;
 	struct device dev;
-	struct acpi_bus_ops bus_ops;	/* workaround for different code path for hotplug */
+	enum acpi_bus_add_type add_type;	/* how to handle adding */
 	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
 	u8 physical_node_count;
 	struct list_head physical_node_list;


  parent reply	other threads:[~2012-12-13 22:18 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-09 22:58 [PATCH 0/6] ACPI: Change the ACPI namespace scanning code ordering Rafael J. Wysocki
2012-12-09 23:00 ` [PATCH 1/6] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2012-12-12 15:50   ` Jiang Liu
2012-12-12 22:34     ` Rafael J. Wysocki
2012-12-12 16:38   ` Jiang Liu
2012-12-12 22:32     ` Rafael J. Wysocki
2012-12-12 23:43       ` [update][PATCH " Rafael J. Wysocki
2012-12-13 13:05       ` [PATCH " Jiang Liu
2012-12-13 19:40         ` Rafael J. Wysocki
2012-12-13  1:00   ` Bjorn Helgaas
2012-12-13 11:41     ` Rafael J. Wysocki
2012-12-09 23:00 ` [PATCH 2/6] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-13  1:00   ` Bjorn Helgaas
2012-12-13 12:19     ` Rafael J. Wysocki
2012-12-09 23:01 ` [PATCH 3/6] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-13  0:11   ` [Update][PATCH " Rafael J. Wysocki
2012-12-09 23:02 ` [PATCH 4/6] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-09 23:03 ` [PATCH 5/6] ACPI: Replace struct acpi_bus_ops with enum type Rafael J. Wysocki
2012-12-10  5:34   ` Yinghai Lu
2012-12-10 14:46     ` Rafael J. Wysocki
2012-12-10 17:07       ` Yinghai Lu
2012-12-10 22:47         ` Rafael J. Wysocki
2012-12-10 23:09           ` Rafael J. Wysocki
2012-12-10 23:14             ` Yinghai Lu
2012-12-11  1:02               ` Rafael J. Wysocki
2012-12-11  1:28                 ` Rafael J. Wysocki
2012-12-11  2:26                   ` Yinghai Lu
2012-12-11 12:45                     ` Rafael J. Wysocki
2012-12-11 15:09                     ` Jiang Liu
2012-12-11 18:30                       ` Rafael J. Wysocki
2012-12-12 14:34                         ` Yijing Wang
2012-12-12 15:05                           ` Jiang Liu
2012-12-12 22:39                             ` Rafael J. Wysocki
2012-12-10 23:22           ` Yinghai Lu
2012-12-11  0:48             ` Rafael J. Wysocki
2012-12-09 23:04 ` [PATCH 6/6] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-13  1:00   ` Bjorn Helgaas
2012-12-13 12:20     ` Rafael J. Wysocki
2012-12-13 11:45 ` [PATCH 0/6] ACPI: Change the ACPI namespace scanning code ordering Yijing Wang
2012-12-13 22:15 ` [PATCH rev.2 " Rafael J. Wysocki
2012-12-13 22:17   ` [PATCH rev.2 1/6] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2012-12-18  0:08     ` Toshi Kani
2012-12-18  1:48       ` Rafael J. Wysocki
2012-12-18 16:10         ` Toshi Kani
2012-12-18 18:59           ` Yinghai Lu
2012-12-18 20:48             ` Toshi Kani
2012-12-18 21:11               ` Yinghai Lu
2012-12-18 22:05             ` Rafael J. Wysocki
2012-12-19  1:57               ` Yinghai Lu
2012-12-18 21:57           ` Rafael J. Wysocki
2012-12-18 22:15             ` Toshi Kani
2012-12-18 23:00               ` Rafael J. Wysocki
2012-12-18 23:19                 ` Bjorn Helgaas
2012-12-19 11:13                   ` Rafael J. Wysocki
2012-12-20  1:45         ` [PATCH 0/16] ACPI: Rework ACPI namespace scanning for devices Rafael J. Wysocki
2012-12-20  1:47           ` [PATCH 1/16] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2013-01-11 20:00             ` Mika Westerberg
2013-01-11 20:31               ` Rafael J. Wysocki
2013-01-11 20:37                 ` Mika Westerberg
2013-01-11 20:58                   ` Rafael J. Wysocki
2013-01-11 20:59                     ` Mika Westerberg
2012-12-20  1:48           ` [PATCH 2/16] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-20  1:49           ` [PATCH 3/16] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-20  1:50           ` [PATCH 4/16] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-20  1:50           ` [PATCH 5/16] ACPI: Replace struct acpi_bus_ops with enum type Rafael J. Wysocki
2012-12-20  1:51           ` [PATCH 6/16] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-20  1:52           ` [PATCH 7/16] ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add() Rafael J. Wysocki
2012-12-20  1:53           ` [PATCH 8/16] ACPI: Remove acpi_start_single_object() and acpi_bus_start() Rafael J. Wysocki
2012-12-20  1:54           ` [PATCH 9/16] ACPI: Remove the arguments of acpi_bus_add() that are not used Rafael J. Wysocki
2012-12-20  1:54           ` [PATCH 10/16] ACPI: Drop the second argument of acpi_bus_scan() Rafael J. Wysocki
2012-12-20  1:55           ` [PATCH 11/16] ACPI: Replace ACPI device add_type field with a match_driver flag Rafael J. Wysocki
2012-12-20  1:56           ` [PATCH 12/16] ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument Rafael J. Wysocki
2012-12-20  1:57           ` [PATCH 13/16] ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type Rafael J. Wysocki
2012-12-20  1:58           ` [PATCH 14/16] ACPI / PCI: Rework the setup and cleanup of device wakeup Rafael J. Wysocki
2012-12-20  1:59           ` [PATCH 15/16] ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c Rafael J. Wysocki
2012-12-20  2:00           ` [PATCH 16/16] ACPI: Drop ACPI device .bind() and .unbind() callbacks Rafael J. Wysocki
2013-01-13 14:16             ` [PATCH] ACPI: remove unused acpi_op_bind and acpi_op_unbind Jiang Liu
2013-01-14 13:03               ` Rafael J. Wysocki
2012-12-20  2:06           ` [PATCH 0/16] ACPI: Rework ACPI namespace scanning for devices Yinghai Lu
2012-12-21  0:09             ` Rafael J. Wysocki
2012-12-21  3:59               ` Yinghai Lu
2012-12-21 22:23                 ` Rafael J. Wysocki
2012-12-20 21:07           ` Toshi Kani
2012-12-20 23:20             ` Rafael J. Wysocki
2012-12-13 22:18   ` [PATCH rev.2 2/6] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-13 22:21   ` [PATCH rev.2 3/6] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-13 22:21   ` [PATCH rev.2 4/6] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-13 22:22   ` Rafael J. Wysocki [this message]
2012-12-13 22:23   ` [PATCH rev.2 6/6] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-14  9:56   ` [PATCH rev.2 0/6] ACPI: Change the ACPI namespace scanning code ordering Yijing Wang
2012-12-14 22:59     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2453149.dHvfCJDb1i@vostro.rjw.lan \
    --to=rjw@sisk.pl \
    --cc=bhelgaas@google.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liuj97@gmail.com \
    --cc=myron.stowe@redhat.com \
    --cc=toshi.kani@hp.com \
    --cc=wangyijing0307@gmail.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®