From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: ACPI Devel Maling List <linux-acpi@vger.kernel.org>
Cc: Toshi Kani <toshi.kani@hp.com>,
Bjorn Helgaas <bhelgaas@google.com>,
LKML <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>,
Myron Stowe <myron.stowe@redhat.com>,
Yijing Wang <wangyijing0307@gmail.com>,
Jiang Liu <liuj97@gmail.com>
Subject: [PATCH 7/16] ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add()
Date: Thu, 20 Dec 2012 02:52:31 +0100 [thread overview]
Message-ID: <5379946.RTtFfZ2sBu@vostro.rjw.lan> (raw)
In-Reply-To: <1855256.SyhOJGYMIh@vostro.rjw.lan>
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the code from the ACPI PCI root bridge's .start() callback
routine, acpi_pci_root_start(), directly into acpi_pci_root_add()
and drop acpi_pci_root_start().
It is safe to do that, because it is now always guaranteed that
when struct pci_dev objects are created, their companion struct
acpi_device objects are already present, so it is not necessary to
wait for them to be created before calling pci_bus_add_devices().
This change was previously proposed in a different form by
Yinghai Lu.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/acpi/pci_root.c | 26 ++++++++------------------
1 file changed, 8 insertions(+), 18 deletions(-)
Index: linux/drivers/acpi/pci_root.c
===================================================================
--- linux.orig/drivers/acpi/pci_root.c
+++ linux/drivers/acpi/pci_root.c
@@ -47,7 +47,6 @@ ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device);
static int acpi_pci_root_remove(struct acpi_device *device, int type);
-static int acpi_pci_root_start(struct acpi_device *device);
#define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \
| OSC_ACTIVE_STATE_PWR_SUPPORT \
@@ -67,7 +66,6 @@ static struct acpi_driver acpi_pci_root_
.ops = {
.add = acpi_pci_root_add,
.remove = acpi_pci_root_remove,
- .start = acpi_pci_root_start,
},
};
@@ -453,6 +451,7 @@ static int __devinit acpi_pci_root_add(s
struct acpi_pci_root *root;
acpi_handle handle;
struct acpi_device *child;
+ struct acpi_pci_driver *driver;
u32 flags, base_flags;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
@@ -628,6 +627,13 @@ static int __devinit acpi_pci_root_add(s
if (device->wakeup.flags.run_wake)
device_set_run_wake(root->bus->bridge, true);
+ mutex_lock(&acpi_pci_root_lock);
+ list_for_each_entry(driver, &acpi_pci_drivers, node)
+ if (driver->add)
+ driver->add(root);
+ mutex_unlock(&acpi_pci_root_lock);
+
+ pci_bus_add_devices(root->bus);
return 0;
out_del_root:
@@ -639,22 +645,6 @@ end:
return result;
}
-static int acpi_pci_root_start(struct acpi_device *device)
-{
- struct acpi_pci_root *root = acpi_driver_data(device);
- struct acpi_pci_driver *driver;
-
- mutex_lock(&acpi_pci_root_lock);
- list_for_each_entry(driver, &acpi_pci_drivers, node)
- if (driver->add)
- driver->add(root);
- mutex_unlock(&acpi_pci_root_lock);
-
- pci_bus_add_devices(root->bus);
-
- return 0;
-}
-
static int acpi_pci_root_remove(struct acpi_device *device, int type)
{
struct acpi_pci_root *root = acpi_driver_data(device);
next prev parent reply other threads:[~2012-12-20 1:56 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-09 22:58 [PATCH 0/6] ACPI: Change the ACPI namespace scanning code ordering Rafael J. Wysocki
2012-12-09 23:00 ` [PATCH 1/6] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2012-12-12 15:50 ` Jiang Liu
2012-12-12 22:34 ` Rafael J. Wysocki
2012-12-12 16:38 ` Jiang Liu
2012-12-12 22:32 ` Rafael J. Wysocki
2012-12-12 23:43 ` [update][PATCH " Rafael J. Wysocki
2012-12-13 13:05 ` [PATCH " Jiang Liu
2012-12-13 19:40 ` Rafael J. Wysocki
2012-12-13 1:00 ` Bjorn Helgaas
2012-12-13 11:41 ` Rafael J. Wysocki
2012-12-09 23:00 ` [PATCH 2/6] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-13 1:00 ` Bjorn Helgaas
2012-12-13 12:19 ` Rafael J. Wysocki
2012-12-09 23:01 ` [PATCH 3/6] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-13 0:11 ` [Update][PATCH " Rafael J. Wysocki
2012-12-09 23:02 ` [PATCH 4/6] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-09 23:03 ` [PATCH 5/6] ACPI: Replace struct acpi_bus_ops with enum type Rafael J. Wysocki
2012-12-10 5:34 ` Yinghai Lu
2012-12-10 14:46 ` Rafael J. Wysocki
2012-12-10 17:07 ` Yinghai Lu
2012-12-10 22:47 ` Rafael J. Wysocki
2012-12-10 23:09 ` Rafael J. Wysocki
2012-12-10 23:14 ` Yinghai Lu
2012-12-11 1:02 ` Rafael J. Wysocki
2012-12-11 1:28 ` Rafael J. Wysocki
2012-12-11 2:26 ` Yinghai Lu
2012-12-11 12:45 ` Rafael J. Wysocki
2012-12-11 15:09 ` Jiang Liu
2012-12-11 18:30 ` Rafael J. Wysocki
2012-12-12 14:34 ` Yijing Wang
2012-12-12 15:05 ` Jiang Liu
2012-12-12 22:39 ` Rafael J. Wysocki
2012-12-10 23:22 ` Yinghai Lu
2012-12-11 0:48 ` Rafael J. Wysocki
2012-12-09 23:04 ` [PATCH 6/6] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-13 1:00 ` Bjorn Helgaas
2012-12-13 12:20 ` Rafael J. Wysocki
2012-12-13 11:45 ` [PATCH 0/6] ACPI: Change the ACPI namespace scanning code ordering Yijing Wang
2012-12-13 22:15 ` [PATCH rev.2 " Rafael J. Wysocki
2012-12-13 22:17 ` [PATCH rev.2 1/6] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2012-12-18 0:08 ` Toshi Kani
2012-12-18 1:48 ` Rafael J. Wysocki
2012-12-18 16:10 ` Toshi Kani
2012-12-18 18:59 ` Yinghai Lu
2012-12-18 20:48 ` Toshi Kani
2012-12-18 21:11 ` Yinghai Lu
2012-12-18 22:05 ` Rafael J. Wysocki
2012-12-19 1:57 ` Yinghai Lu
2012-12-18 21:57 ` Rafael J. Wysocki
2012-12-18 22:15 ` Toshi Kani
2012-12-18 23:00 ` Rafael J. Wysocki
2012-12-18 23:19 ` Bjorn Helgaas
2012-12-19 11:13 ` Rafael J. Wysocki
2012-12-20 1:45 ` [PATCH 0/16] ACPI: Rework ACPI namespace scanning for devices Rafael J. Wysocki
2012-12-20 1:47 ` [PATCH 1/16] ACPI: Separate adding ACPI device objects from probing ACPI drivers Rafael J. Wysocki
2013-01-11 20:00 ` Mika Westerberg
2013-01-11 20:31 ` Rafael J. Wysocki
2013-01-11 20:37 ` Mika Westerberg
2013-01-11 20:58 ` Rafael J. Wysocki
2013-01-11 20:59 ` Mika Westerberg
2012-12-20 1:48 ` [PATCH 2/16] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-20 1:49 ` [PATCH 3/16] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-20 1:50 ` [PATCH 4/16] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-20 1:50 ` [PATCH 5/16] ACPI: Replace struct acpi_bus_ops with enum type Rafael J. Wysocki
2012-12-20 1:51 ` [PATCH 6/16] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-20 1:52 ` Rafael J. Wysocki [this message]
2012-12-20 1:53 ` [PATCH 8/16] ACPI: Remove acpi_start_single_object() and acpi_bus_start() Rafael J. Wysocki
2012-12-20 1:54 ` [PATCH 9/16] ACPI: Remove the arguments of acpi_bus_add() that are not used Rafael J. Wysocki
2012-12-20 1:54 ` [PATCH 10/16] ACPI: Drop the second argument of acpi_bus_scan() Rafael J. Wysocki
2012-12-20 1:55 ` [PATCH 11/16] ACPI: Replace ACPI device add_type field with a match_driver flag Rafael J. Wysocki
2012-12-20 1:56 ` [PATCH 12/16] ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument Rafael J. Wysocki
2012-12-20 1:57 ` [PATCH 13/16] ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type Rafael J. Wysocki
2012-12-20 1:58 ` [PATCH 14/16] ACPI / PCI: Rework the setup and cleanup of device wakeup Rafael J. Wysocki
2012-12-20 1:59 ` [PATCH 15/16] ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c Rafael J. Wysocki
2012-12-20 2:00 ` [PATCH 16/16] ACPI: Drop ACPI device .bind() and .unbind() callbacks Rafael J. Wysocki
2013-01-13 14:16 ` [PATCH] ACPI: remove unused acpi_op_bind and acpi_op_unbind Jiang Liu
2013-01-14 13:03 ` Rafael J. Wysocki
2012-12-20 2:06 ` [PATCH 0/16] ACPI: Rework ACPI namespace scanning for devices Yinghai Lu
2012-12-21 0:09 ` Rafael J. Wysocki
2012-12-21 3:59 ` Yinghai Lu
2012-12-21 22:23 ` Rafael J. Wysocki
2012-12-20 21:07 ` Toshi Kani
2012-12-20 23:20 ` Rafael J. Wysocki
2012-12-13 22:18 ` [PATCH rev.2 2/6] ACPI: Change the ordering of PCI root bridge driver registrarion Rafael J. Wysocki
2012-12-13 22:21 ` [PATCH rev.2 3/6] ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different Rafael J. Wysocki
2012-12-13 22:21 ` [PATCH rev.2 4/6] ACPI: Reduce the usage of struct acpi_bus_ops Rafael J. Wysocki
2012-12-13 22:22 ` [PATCH rev.2 5/6] ACPI: Replace struct acpi_bus_ops with enum type Rafael J. Wysocki
2012-12-13 22:23 ` [PATCH rev.2 6/6] ACPI: Change the ordering of acpi_bus_check_add() Rafael J. Wysocki
2012-12-14 9:56 ` [PATCH rev.2 0/6] ACPI: Change the ACPI namespace scanning code ordering Yijing Wang
2012-12-14 22:59 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5379946.RTtFfZ2sBu@vostro.rjw.lan \
--to=rjw@sisk.pl \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liuj97@gmail.com \
--cc=myron.stowe@redhat.com \
--cc=toshi.kani@hp.com \
--cc=wangyijing0307@gmail.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome