[PATCH v5 0/6] DRM/MSM: Support for Adreno 663 GPU

[PATCH v5 0/6] DRM/MSM: Support for Adreno 663 GPU

[Akhil P Oommen]

This series adds support for Adreno 663 gpu found in SA8775P (Lemans)
chipsets. The closest gpu which is currently supported in drm-msm is A660.
Following are the major differences with that:
	1. gmu/zap firmwares
	2. Recommended to disable Level2 swizzling

Verified kmscube/weston/glmark2-es2. This series is rebased on top of
v6.17-rc1.

Due to the renaming of the Leman's devicetree files [1], this v4
revision had to wait for quite sometime.

Patch#1 is for Rob Clark, Patch#2 for Srinivas and the rest are for Bjorn to pick up.

[1] https://lore.kernel.org/all/20250803110113.401927-1-wasim.nazir@oss.qualcomm.com/

To: Rob Clark <robdclark@gmail.com>
To: Sean Paul <sean@poorly.run>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Marijn Suijten <marijn.suijten@somainline.org>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Connor Abbott <cwabbott0@gmail.com>
To: Srinivas Kandagatla <srini@kernel.org>
Cc: Gaurav Kohli <quic_gkohli@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org

-Akhil

---
Changes in v5:
- Remove unnecessary labels in the gpu cooling patch (Konrad)
- Update the RPMH corner for 530 Mhz
- Wire up the gpu speedbin node to the gpu
- Link to v4: https://lore.kernel.org/r/20250822-a663-gpu-support-v4-0-97d26bb2144e@oss.qualcomm.com

Changes in v4:
- Rebased on top of another series which renames DT files
- Enabled GPU on IoT boards as per the latest definition
- Picked up SKU detection support
- Added GPU passive cooling support
- Link to v3: https://lore.kernel.org/r/20241030-a663-gpu-support-v3-0-bdf1d9ce6021@quicinc.com

Changes in v3:
- Rebased on the latest msm-next tip
- Added R-b tags from Dmitry
- Dropped patch #1 and #2 from v2 revision since they are already
picked up in msm-next
- Link to v2: https://lore.kernel.org/r/20241022-a663-gpu-support-v2-0-38da38234697@quicinc.com

Changes in v2:
- Fixed ubwc configuration (dimtry)
- Split out platform dt patch (dimtry)
- Fix formatting in the dt patch (dimtry)
- Updated Opp table to include all levels
- Updated bw IB votes to match downstream
- Rebased on top of msm-next tip
- Link to v1: https://lore.kernel.org/r/20240918-a663-gpu-support-v1-0-25fea3f3d64d@quicinc.com

---
Akhil P Oommen (4):
      drm/msm/adreno: Add speedbins for A663 GPU
      dt-bindings: nvmem: qfprom: Add sa8775p compatible
      arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU
      arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU

Gaurav Kohli (1):
      arm64: dts: qcom: lemans: Add GPU cooling

Puranam V G Tejaswi (1):
      arm64: dts: qcom: sa8775p: Add gpu and gmu nodes

 .../devicetree/bindings/nvmem/qcom,qfprom.yaml     |   1 +
 arch/arm64/boot/dts/qcom/lemans-evk.dts            |   8 +
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi   |   8 +
 arch/arm64/boot/dts/qcom/lemans.dtsi               | 174 ++++++++++++++++++++-
 drivers/gpu/drm/msm/adreno/a6xx_catalog.c          |   5 +
 5 files changed, 190 insertions(+), 6 deletions(-)
---
base-commit: 062b3e4a1f880f104a8d4b90b767788786aa7b78
change-id: 20240917-a663-gpu-support-b1475c828606
prerequisite-message-id: <20250803110113.401927-1-wasim.nazir@oss.qualcomm.com>
prerequisite-patch-id: 765475c5f1418d986e661a213cfb33ee6ffb9548
prerequisite-patch-id: 03c6d1a5b0ae9095845828fc5cbb701b00f41131
prerequisite-patch-id: f7b8a288cf4ef309b4027f0b617b7435c17d6b1f
prerequisite-patch-id: aacfb31f99b75b2f5bf2f44bbd9abf8db0f66b1d
prerequisite-patch-id: dc442a0932abeb5139daa547a1b1f4282fa9a6fa
prerequisite-patch-id: e8a728d629b4bdd22bc1ef21f3d593e17a8d3b44
prerequisite-patch-id: 067fe8f5151b3fea9cbc37192e559a123abcdb71
prerequisite-patch-id: 62150f33bd304fc34b8fbb4aab953c6c4bb8a566

Best regards,
-- 
Akhil P Oommen <akhilpo@oss.qualcomm.com>

[PATCH v5 1/6] drm/msm/adreno: Add speedbins for A663 GPU

[Akhil P Oommen]

Add speedbin mappings for A663 GPU.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 drivers/gpu/drm/msm/adreno/a6xx_catalog.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_catalog.c b/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
index 00e1afd46b81546eec03e22cda9e9a604f6f3b60..2b1c41f6cfeee912ba59f00c1beb4a43f0914796 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
@@ -1024,6 +1024,11 @@ static const struct adreno_info a6xx_gpus[] = {
 			.gmu_cgc_mode = 0x00020200,
 			.prim_fifo_threshold = 0x00300200,
 		},
+		.speedbins = ADRENO_SPEEDBINS(
+			{ 0,   0 },
+			{ 169, 0 },
+			{ 113, 1 },
+		),
 	}, {
 		.chip_ids = ADRENO_CHIP_IDS(0x06030500),
 		.family = ADRENO_6XX_GEN4,

-- 
2.50.1

[PATCH v5 2/6] dt-bindings: nvmem: qfprom: Add sa8775p compatible

[Akhil P Oommen]

Document compatible string for the QFPROM on Lemans platform.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 3f6dc6a3a9f1adc582a28cf71414b0e9d08629ed..7d1612acca48d24c3b54c4d25fa8a210176d3bb5 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -39,6 +39,7 @@ properties:
           - qcom,qcs404-qfprom
           - qcom,qcs615-qfprom
           - qcom,qcs8300-qfprom
+          - qcom,sa8775p-qfprom
           - qcom,sar2130p-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom

-- 
2.50.1

[PATCH v5 3/6] arm64: dts: qcom: sa8775p: Add gpu and gmu nodes

[Akhil P Oommen]

From: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>

Add gpu and gmu nodes for sa8775p chipset. Also, add the speedbin
qfprom node and wire it up with GPU node.

Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 119 +++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 8ceb59742a9fc6562b2c38731ddabe3a549f7f35..52c2533383920fdf34dc1eba11e5ec01209f4e8a 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -1097,6 +1097,18 @@ ipcc: mailbox@408000 {
 			#mbox-cells = <2>;
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sa8775p-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00784000 0x0 0x2410>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@240c {
+				reg = <0x240c 0x1>;
+				bits = <0 8>;
+			};
+		};
+
 		gpi_dma2: dma-controller@800000  {
 			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00800000 0x0 0x60000>;
@@ -4093,6 +4105,113 @@ tcsr: syscon@1fc0000 {
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-663.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>,
+				 <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-405000000 {
+					opp-hz = /bits/ 64 <405000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5285156>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-530000000 {
+					opp-hz = /bits/ 64 <530000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8171875>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <10687500>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x34000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sa8775p-gpucc";
 			reg = <0x0 0x03d90000 0x0 0xa000>;

-- 
2.50.1

[PATCH v5 4/6] arm64: dts: qcom: lemans: Add GPU cooling

[Akhil P Oommen]

From: Gaurav Kohli <quic_gkohli@quicinc.com>

Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.

Set up GPU cooling by throttling the GPU speed
when reaching 105°C.

Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 55 ++++++++++++++++++++++++++++++++----
 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 52c2533383920fdf34dc1eba11e5ec01209f4e8a..cc64ff9aa8dd1f2b610548e5a5f5192bd4feba7e 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -6824,8 +6825,15 @@ gpuss-0-thermal {
 
 			thermal-sensors = <&tsens0 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss0_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -6844,8 +6852,15 @@ gpuss-1-thermal {
 
 			thermal-sensors = <&tsens0 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss1_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -6864,8 +6879,15 @@ gpuss-2-thermal {
 
 			thermal-sensors = <&tsens0 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss2_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7054,8 +7076,15 @@ gpuss-3-thermal {
 
 			thermal-sensors = <&tsens1 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss3_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7074,8 +7103,15 @@ gpuss-4-thermal {
 
 			thermal-sensors = <&tsens1 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss4_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -7094,8 +7130,15 @@ gpuss-5-thermal {
 
 			thermal-sensors = <&tsens1 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpuss5_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <5000>;
 					type = "passive";

-- 
2.50.1

[PATCH v5 5/6] arm64: dts: qcom: lemans-evk: Enable Adreno 663 GPU

[Akhil P Oommen]

Enable GPU for lemans-evk platform and provide path for zap
shader.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 669ac52f4cf6aece72141416068268531fd9f79a..876f43d761870b968e43ea1ecc360b4403f19fef 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -253,6 +253,14 @@ vreg_l8e: ldo8 {
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };

-- 
2.50.1

[PATCH v5 6/6] arm64: dts: qcom: qcs9100-ride: Enable Adreno 663 GPU

[Akhil P Oommen]

Enable GPU on both qcs9100-ride platforms and provide the path
for zap shader.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 25e756c141606fbe0876ed48a54809b372650903..e9540cbff78ee44d6d92de10464c660a05a68db9 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -436,6 +436,14 @@ vreg_l8e: ldo8 {
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8775p/a663_zap.mbn";
+};
+
 &i2c11 {
 	clock-frequency = <400000>;
 	status = "okay";

-- 
2.50.1

Re: [PATCH v5 4/6] arm64: dts: qcom: lemans: Add GPU cooling

[Konrad Dybcio]

On 9/8/25 9:39 PM, Akhil P Oommen wrote:
> From: Gaurav Kohli <quic_gkohli@quicinc.com>
> 
> Unlike the CPU, the GPU does not throttle its speed automatically when it
> reaches high temperatures.
> 
> Set up GPU cooling by throttling the GPU speed
> when reaching 105°C.
> 
> Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

you'll probably want to turn the 115 trip point into 'critical'
(which is fine to do in a separate patch)

Konrad

Re: [PATCH v5 3/6] arm64: dts: qcom: sa8775p: Add gpu and gmu nodes

[Konrad Dybcio]

On 9/8/25 9:39 PM, Akhil P Oommen wrote:
> From: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
> 
> Add gpu and gmu nodes for sa8775p chipset. Also, add the speedbin
> qfprom node and wire it up with GPU node.
> 
> Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

None of my comments on v4 were addressed (we agreed to drop the
GMU MMIO range one but others still stand)

https://lore.kernel.org/all/f11b778d-eba1-4712-81c7-b83f2cb38b46@oss.qualcomm.com/

Konrad