Re: [PATCH] USB: Fix xhci ERDP update issue

[Mathias Nyman <mathias.nyman@linux.intel.com>]

On 14.3.2022 9.25, WeitaoWang-oc@zhaoxin.com wrote:
> On some situations, software handles TRB events slower than adding TRBs,
> xhci_irq will not exit until all events are handled. If xhci_irq just
> handles 256 TRBs and exit, the temp variable(event_ring_deq) driver records in xhci irq is equal to driver current dequeue pointer. It will cause driver not update ERDP and software dequeue pointer lost sync with ERDP. On the next xhci_irq, the event ring is full but driver will not update ERDP as software dequeue pointer is equal to ERDP.
> 
> [  536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
> [  566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
> [  566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
> [  572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
> [  572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
> [  572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
> [  572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
> [  572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
> [  572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD
> 
> Fixed this issue by update software record temp variable when handles 128 TRB events.> 
> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>

Thanks

Solution itself looks good but patch has some minor format issue:


It would also be interesting to know if the full event ring was triggered in a real
life usecase?
If that is the case I might need to look more into it.

Bigger event ring, more rings, faster handler, avoid irqoff time...

Thanks
Mathias