[PATCH v5 00/10] ARM: dts: aspeed: catalina: Update DTS to support Catalina PVT hardware

[PATCH v5 00/10] ARM: dts: aspeed: catalina: Update DTS to support Catalina PVT hardware

[Potin Lai]

Update the DTS file for the Catalina platform based on the PVT hardware
changes.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
Changes in v5:
- Revise CBC FRU eeprom i2c bus and address
- Add MCTP support for backend NIC monitoring via PLDM over MCTP
- Link to v4: https://lore.kernel.org/r/20250320-potin-catalina-dts-update-20250102-v4-0-7c34b8139014@gmail.com

Changes in v4:
- Split a single commit into multiple smaller commits to reduce complexity.
- Add `multi-master` into i2c12 & i2c13  
- Link to v3: https://lore.kernel.org/r/20250114-potin-catalina-dts-update-20250102-v3-1-14981744b2fe@gmail.com

Changes in v3:
- Remove delta_brick nodes due to compatible string not supported
- Link to v2: https://lore.kernel.org/r/20250113-potin-catalina-dts-update-20250102-v2-1-1725117fe7a9@gmail.com

Changes in v2:
- Add delta_brick nodes to support PDB brick board
- Link to v1: https://lore.kernel.org/r/20250103-potin-catalina-dts-update-20250102-v1-1-b0b7a523c968@gmail.com

---
Potin Lai (10):
      ARM: dts: aspeed: catalina: Add IO Mezz board thermal sensor nodes
      ARM: dts: aspeed: catalina: Add Front IO board remote thermal sensor
      ARM: dts: aspeed: catalina: Add MP5990 power sensor node
      ARM: dts: aspeed: catalina: Add fan controller support
      ARM: dts: aspeed: catalina: Add second source fan controller support
      ARM: dts: aspeed: catalina: Add second source HSC node support
      ARM: dts: aspeed: catalina: Remove INA238 and INA230 nodes
      ARM: dts: aspeed: catalina: Enable multi-master on additional I2C buses
      ARM: dts: aspeed: catalina: Update CBC FRU EEPROM I2C bus and address
      ARM: dts: aspeed: catalina: Enable MCTP support for NIC management

 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 197 +++++++++++++++------
 1 file changed, 144 insertions(+), 53 deletions(-)
---
base-commit: 4701f33a10702d5fc577c32434eb62adde0a1ae1
change-id: 20250102-potin-catalina-dts-update-20250102-914b06a4bdba

Best regards,
-- 
Potin Lai <potin.lai.pt@gmail.com>

[PATCH v5 01/10] ARM: dts: aspeed: catalina: Add IO Mezz board thermal sensor nodes

[Potin Lai]

Add thermal sensor nodes for the IO Mezzanine (IO Mezz) board in the
Catalina platform device tree. These nodes enable temperature monitoring
for the backend NIC, improving thermal management and monitoring
capabilities.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index c151984289bc..d5d99a945ee4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -198,6 +198,12 @@ i2c0mux0ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch1: i2c@1 {
 			#address-cells = <1>;
@@ -208,6 +214,12 @@ i2c0mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch3: i2c@3 {
 			#address-cells = <1>;
@@ -299,6 +311,12 @@ i2c0mux3ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch1: i2c@1 {
 			#address-cells = <1>;
@@ -309,6 +327,12 @@ i2c0mux3ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch3: i2c@3 {
 			#address-cells = <1>;

-- 
2.31.1

[PATCH v5 02/10] ARM: dts: aspeed: catalina: Add Front IO board remote thermal sensor

[Potin Lai]

Add a remote thermal sensor node for the Front IO board in the Catalina
platform device tree. This sensor enables monitoring of the inlet
temperature.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index d5d99a945ee4..307af99e833c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -544,6 +544,12 @@ temperature-sensor@4b {
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
 		};
 	};
 };

-- 
2.31.1

[PATCH v5 03/10] ARM: dts: aspeed: catalina: Add MP5990 power sensor node

[Potin Lai]

Add a device tree node for the MP5990 power sensor to enable monitoring of
the P12V supplying power to the fans.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 307af99e833c..f5f47245796a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -428,6 +428,10 @@ i2c1mux0ch0: i2c@0 {
 			#size-cells = <0>;
 			reg = <0x0>;
 
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
 			power-sensor@41 {
 				compatible = "ti,ina238";
 				reg = <0x41>;

-- 
2.31.1

[PATCH v5 04/10] ARM: dts: aspeed: catalina: Add fan controller support

[Potin Lai]

Add device tree nodes for the MAX31790 fan controllers on the Power
Distribution Board (PDB). These nodes enable fan speed control and
monitoring, improving thermal management and system reliability.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index f5f47245796a..fd22add90449 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -466,6 +466,15 @@ i2c1mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x2>;
+
+			pwm@21{
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			pwm@27{
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
 		};
 		i2c1mux0ch3: i2c@3 {
 			#address-cells = <1>;

-- 
2.31.1

[PATCH v5 05/10] ARM: dts: aspeed: catalina: Add second source fan controller support

[Potin Lai]

Add device tree nodes for the NCT7363 fan controllers on the second-source
Power Distribution Board (PDB).

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index fd22add90449..9cbb296dcd9e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -467,6 +467,82 @@ i2c1mux0ch2: i2c@2 {
 			#size-cells = <0>;
 			reg = <0x2>;
 
+			hwmon0: hwmon@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&hwmon0 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&hwmon0 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&hwmon0 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&hwmon0 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&hwmon0 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&hwmon0 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&hwmon0 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&hwmon0 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			hwmon1: hwmon@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&hwmon1 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&hwmon1 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&hwmon1 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&hwmon1 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&hwmon1 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&hwmon1 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&hwmon1 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&hwmon1 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
 			pwm@21{
 				compatible = "maxim,max31790";
 				reg = <0x21>;

-- 
2.31.1

Re: [PATCH v5 05/10] ARM: dts: aspeed: catalina: Add second source fan controller support

[Andrew Jeffery]

Hi Potin,

On Thu, 2025-03-20 at 23:21 +0800, Potin Lai wrote:
> Add device tree nodes for the NCT7363 fan controllers on the second-
> source
> Power Distribution Board (PDB).
> 
> Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
> ---
>  .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 76
> ++++++++++++++++++++++
>  1 file changed, 76 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-
> catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-
> catalina.dts
> index fd22add90449..9cbb296dcd9e 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
> @@ -467,6 +467,82 @@ i2c1mux0ch2: i2c@2 {
>                         #size-cells = <0>;
>                         reg = <0x2>;
>  
> +                       hwmon0: hwmon@1 {

There might be instances of calling nodes and labels 'hwmon' in other
(BMC) devicetrees, but I don't think we should continue that practice.
I think in this case it should be 'fan-controller'.

hwmon is the name of a kernel subsystem, not a class of hardware. The
devicetrees should describe the hardware (and not concepts from the
kernel).


> +                               compatible = "nuvoton,nct7363";
> +                               reg = <0x01>;
> +                               #pwm-cells = <2>;
> +
> +                               fan-9 {
> +                                       pwms = <&hwmon0 0 40000>;
> +                                       tach-ch = /bits/ 8 <0x09>;
> +                               };
> +                               fan-11 {
> +                                       pwms = <&hwmon0 0 40000>;
> +                                       tach-ch = /bits/ 8 <0x0b>;
> +                               };
> +                               fan-10 {
> +                                       pwms = <&hwmon0 4 40000>;
> +                                       tach-ch = /bits/ 8 <0x0a>;
> +                               };
> +                               fan-13 {
> +                                       pwms = <&hwmon0 4 40000>;
> +                                       tach-ch = /bits/ 8 <0x0d>;
> +                               };
> +                               fan-15 {
> +                                       pwms = <&hwmon0 6 40000>;
> +                                       tach-ch = /bits/ 8 <0x0f>;
> +                               };
> +                               fan-1 {
> +                                       pwms = <&hwmon0 6 40000>;
> +                                       tach-ch = /bits/ 8 <0x01>;
> +                               };
> +                               fan-0 {
> +                                       pwms = <&hwmon0 10 40000>;
> +                                       tach-ch = /bits/ 8 <0x00>;
> +                               };
> +                               fan-3 {
> +                                       pwms = <&hwmon0 10 40000>;
> +                                       tach-ch = /bits/ 8 <0x03>;
> +                               };
> +                       };
> +                       hwmon1: hwmon@2 {

As above.

Andrew

[PATCH v5 06/10] ARM: dts: aspeed: catalina: Add second source HSC node support

[Potin Lai]

Add device tree nodes for the XDP710 Hot-Swap Controller (HSC) to support
the Power Distribution Board (PDB) with a second-source configuration.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 9cbb296dcd9e..cf8a31b50074 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -562,6 +562,14 @@ i2c1mux0ch4: i2c@4 {
 			#size-cells = <0>;
 			reg = <0x4>;
 
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
 			power-monitor@42 {
 				compatible = "lltc,ltc4287";
 				reg = <0x42>;

-- 
2.31.1

[PATCH v5 07/10] ARM: dts: aspeed: catalina: Remove INA238 and INA230 nodes

[Potin Lai]

Remove INA238 and INA230 power sensor nodes from the device tree (DTS) due
to incompatibility with the second-source ISL28022, which shares the same
I2C address.

Move the driver probe to userspace to handle sensor dynamically.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 45 ----------------------
 1 file changed, 45 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index cf8a31b50074..1e1bcc9ac2f0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -432,35 +432,11 @@ power-sensor@22 {
 				compatible = "mps,mp5990";
 				reg = <0x22>;
 			};
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@42 {
-				compatible = "ti,ina238";
-				reg = <0x42>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@44 {
-				compatible = "ti,ina238";
-				reg = <0x44>;
-				shunt-resistor = <500>;
-			};
 		};
 		i2c1mux0ch1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x1>;
-
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-			};
-			power-sensor@43 {
-				compatible = "ti,ina238";
-				reg = <0x43>;
-			};
 		};
 		i2c1mux0ch2: i2c@2 {
 			#address-cells = <1>;
@@ -753,27 +729,6 @@ i2c5mux0ch7: i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-
-			power-sensor@40 {
-				compatible = "ti,ina230";
-				reg = <0x40>;
-				shunt-resistor = <2000>;
-			};
-			power-sensor@41 {
-				compatible = "ti,ina230";
-				reg = <0x41>;
-				shunt-resistor = <2000>;
-			};
-			power-sensor@44 {
-				compatible = "ti,ina230";
-				reg = <0x44>;
-				shunt-resistor = <2000>;
-			};
-			power-sensor@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-				shunt-resistor = <2000>;
-			};
 		};
 	};
 };

-- 
2.31.1

[PATCH v5 08/10] ARM: dts: aspeed: catalina: Enable multi-master on additional I2C buses

[Potin Lai]

Update the device tree to enable `multi-master` mode on I2C buses shared
between the host BMC and the NV module with HMC. This ensures proper bus
arbitration and coordination in multi-master environments, preventing
communication conflicts and improving reliability.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 1e1bcc9ac2f0..abf15d322605 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -815,6 +815,7 @@ ssif-bmc@10 {
 
 &i2c12 {
 	status = "okay";
+	multi-master;
 
 	// Module 1 FRU EEPROM
 	eeprom@50 {
@@ -825,6 +826,7 @@ eeprom@50 {
 
 &i2c13 {
 	status = "okay";
+	multi-master;
 
 	// Module 0 FRU EEPROM
 	eeprom@50 {

-- 
2.31.1

[PATCH v5 09/10] ARM: dts: aspeed: catalina: Update CBC FRU EEPROM I2C bus and address

[Potin Lai]

Revise the I2C bus and address for the Cable Backplane Cartridge (CBC)
FRU EEPROM in the Catalina device tree.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index abf15d322605..653afacc7af4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -822,6 +822,12 @@ eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
 };
 
 &i2c13 {
@@ -834,18 +840,12 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	// Left CBC FRU EEPROM
+	// Primary CBC FRU EEPROM
 	eeprom@54 {
 		compatible = "atmel,24c02";
 		reg = <0x54>;
 	};
 
-	// Right CBC FRU EEPROM
-	eeprom@55 {
-		compatible = "atmel,24c02";
-		reg = <0x55>;
-	};
-
 	// HMC FRU EEPROM
 	eeprom@57 {
 		compatible = "atmel,24c02";

-- 
2.31.1

[PATCH v5 10/10] ARM: dts: aspeed: catalina: Enable MCTP support for NIC management

[Potin Lai]

Add the `mctp-controller` property and MCTP nodes to enable support for
backend NIC management via PLDM over MCTP.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 653afacc7af4..6eb6c5889113 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -186,18 +186,23 @@ flash@1 {
 
 &i2c0 {
 	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
 
 		i2c0mux0ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
 
 			// IOB0 NIC0 TEMP
 			temperature-sensor@1f {
@@ -214,6 +219,7 @@ i2c0mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
 
 			// IOB0 NIC1 TEMP
 			temperature-sensor@1f {
@@ -305,12 +311,12 @@ i2c-mux@75 {
 		reg = <0x75>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
 
 		i2c0mux3ch0: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
 
 			// IOB1 NIC0 TEMP
 			temperature-sensor@1f {
@@ -327,6 +333,7 @@ i2c0mux3ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
 
 			// IOB1 NIC1 TEMP
 			temperature-sensor@1f {

-- 
2.31.1