Re: [PATCH net-next 7/7] net: hibmcge: Add ioctl supported in this module

[Jijie Shao <shaojijie@huawei.com>]

on 2025/2/14 4:13, Andrew Lunn wrote:
> On Thu, Feb 13, 2025 at 11:55:29AM +0800, Jijie Shao wrote:
>> This patch implements the ioctl interface to
>> read and write the PHY register.
>>
>> Signed-off-by: Jijie Shao <shaojijie@huawei.com>
>> ---
>>   .../net/ethernet/hisilicon/hibmcge/hbg_main.c  | 18 ++++++++++++++++++
>>   .../net/ethernet/hisilicon/hibmcge/hbg_mdio.c  | 10 ++++++++++
>>   .../net/ethernet/hisilicon/hibmcge/hbg_mdio.h  |  2 ++
>>   3 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c b/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
>> index 78999d41f41d..afd04ed65eee 100644
>> --- a/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
>> +++ b/drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
>> @@ -273,6 +273,23 @@ static netdev_features_t hbg_net_fix_features(struct net_device *netdev,
>>   	return features & HBG_SUPPORT_FEATURES;
>>   }
>>   
>> +static int hbg_net_eth_ioctl(struct net_device *dev, struct ifreq *ifr, s32 cmd)
>> +{
>> +	struct hbg_priv *priv = netdev_priv(dev);
>> +
>> +	if (test_bit(HBG_NIC_STATE_RESETTING, &priv->state))
>> +		return -EBUSY;
>> +
>> +	switch (cmd) {
>> +	case SIOCGMIIPHY:
>> +	case SIOCGMIIREG:
>> +	case SIOCSMIIREG:
>> +		return hbg_mdio_ioctl(priv, ifr, cmd);
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
> No need for this switch statement. phy_mii_ioctl() will return
> EOPNOTSUPP for any it does not support.
>
> The general structure of an IOCTL handler is to have a switch
> statements for any IOCTL which are handled at this level and the
> default: case then calls into the next layer down.
>
>> +int hbg_mdio_ioctl(struct hbg_priv *priv, struct ifreq *ifr, int cmd)
>> +{
>> +	struct hbg_mac *mac = &priv->mac;
>> +
>> +	if (!mac->phydev)
>> +		return -ENODEV;
>> +
>> +	return phy_mii_ioctl(mac->phydev, ifr, cmd);
> phy_do_ioctl(). This is assuming you follow the normal pattern of
> keeping the phydev pointer in the net_device structure.
>
> 	Andrew

Yes, of course

So I think I can just use:
  .ndo_eth_ioctl = phy_do_ioctl,

No other code is required.

Thanks,
Jijie Shao