[PATCH 00/27] ASoC: Map missing jack kcontrols

[PATCH 00/27] ASoC: Map missing jack kcontrols

[Alper Nebi Yasak]

This patchset adds missing jack kcontrols for each independently
detectable audio peripheral and maps jack pins to those kcontrols
accordingly, with the primary intent to enable/improve jack detection
handling in PulseAudio and PipeWire through JackControl UCM values.

Usually it's just splitting a joint anything-is-connected "Headset Jack"
kcontrol (from [1]) into those like "Headphone Jack" and "Headset Mic"
(similar to a previous series for Intel Chromebooks [2]). This split is
important to avoid automatically switching to a nonexistent external
microphone when a headphone-only device is connected.

When the underlying hardware seems to support it, this also adds a "Line
Out" kcontrol. This is important in case the hardware can actually
support a line-level connection via a different configuration (bypassing
output amplifiers?), or simply for userspace to display "Line Out"
instead of "Headphones" to the user for connected line-out devices.

Beyond the mappings, I had to add PIN_SWITCH card kcontrols and DAPM
widgets to avoid "unknown pin" errors on my devices, so tried to do them
for all. For Intel devices I saw a pattern of routing things to
"Platform Clock" and added to that as well. Looking at patch 5/7 of a
Mediatek-related series [3], I can only guess that routes could be
further improved, but don't know exactly how for each device. And one
more concern is I don't know if the names conflict with any controls
from codecs, although I tried to keep to names of existing widgets.

As far as I can tell, the root cause for most of why these are missing
originates to things being developed for ChromeOS, whose userspace reads
the jack input device and doesn't care for these kcontrols. There's
non-ChromeOS cases as well, maybe things got copy-pasted around and
people didn't need or couldn't figure out how to get more specific than
a single jack kcontrol. The secondary intent in this patchset is to fix
this *everywhere*, so future copy-pastes result in the right behaviour.

For more context also see:

[1] ASoC: soc-card: Create jack kcontrol without pins
https://lore.kernel.org/alsa-devel/20220408041114.6024-1-akihiko.odaki@gmail.com/

[2] ASoC: Intel: Chromebooks: remap jack pins
https://lore.kernel.org/alsa-devel/20220616214055.134943-1-pierre-louis.bossart@linux.intel.com/

[3] ASoC: mediatek: Allow separate handling of headphone and headset mic jack
https://lore.kernel.org/alsa-devel/20220922235951.252532-1-nfraprado@collabora.com/

[4] ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols for jack detection
https://lore.kernel.org/alsa-devel/20200721182709.6895-1-alpernebiyasak@gmail.com/

This applies onto next-20230802. Unfortunately most of it is untested
except for a few Chromebooks I have (Kevin, Lick, Hana, Cozmo), because
I'm intentionally generalizing to everything.


Alper Nebi Yasak (27):
  ASoC: amd: acp-da7219-max98357a: Map missing jack kcontrols
  ASoC: amd: acp-rt5645: Map missing jack kcontrols
  ASoC: amd: acp: Map missing jack kcontrols
  ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols
  ASoC: Intel: avs: da7219: Map missing jack kcontrols
  ASoC: Intel: bxt_da7219_max98357a: Map missing Line Out jack kcontrol
  ASoC: Intel: bytcr_wm5102: Map missing Line Out jack kcontrol
  ASoC: Intel: kbl_da7219_max98357a: Map missing Line Out jack kcontrol
  ASoC: Intel: kbl_da7219_max98927: Map missing Line Out jack kcontrol
  ASoC: Intel: sof_da7219_max98373: Map missing Line Out jack kcontrol
  ASoC: imx-es8328: Map missing jack kcontrols
  ASoC: mediatek: mt8173-max98090: Configure jack as a Headset jack
  ASoC: mediatek: mt8173-rt5650-rt5514: Map missing jack kcontrols
  ASoC: mediatek: mt8173-rt5650-rt5676: Map missing jack kcontrols
  ASoC: mediatek: mt8173-rt5650: Map missing jack kcontrols
  ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols
  ASoC: mediatek: mt8183-mt6358-ts3a227-max98357: Map missing jack
    kcontrols
  ASoC: mediatek: mt8186-mt6366-da7219-max98357: Map missing jack
    kcontrols
  ASoC: qcom: apq8016_sbc: Map missing jack kcontrols
  ASoC: qcom: sc7180: Map missing jack kcontrols
  ASoC: qcom: sc7280: Map missing jack kcontrols
  ASoC: qcom: sdm845: Map missing jack kcontrols
  ASoC: rk3399-gru-sound: Map missing Line Out jack kcontrol
  ASoC: rockchip: rockchip_rt5645: Map missing jack kcontrols
  ASoC: samsung: littlemill: Map missing jack kcontrols
  ASoC: samsung: lowland: Split Line Out jack kcontrol from Headphone
  ASoC: samsung: midas_wm1811: Map missing jack kcontrols

 sound/soc/amd/acp-da7219-max98357a.c          |  41 +++-
 sound/soc/amd/acp-rt5645.c                    |  22 +-
 sound/soc/amd/acp/acp-mach-common.c           | 226 ++++++++++++++----
 sound/soc/amd/acp3x-rt5682-max9836.c          |  23 +-
 sound/soc/fsl/imx-es8328.c                    |  25 +-
 sound/soc/intel/avs/boards/da7219.c           |  34 ++-
 sound/soc/intel/boards/bxt_da7219_max98357a.c |   7 +
 sound/soc/intel/boards/bytcr_wm5102.c         |   7 +
 sound/soc/intel/boards/kbl_da7219_max98357a.c |   7 +
 sound/soc/intel/boards/kbl_da7219_max98927.c  |   7 +
 sound/soc/intel/boards/sof_da7219_max98373.c  |  10 +
 sound/soc/mediatek/mt8173/mt8173-max98090.c   |   2 +-
 .../mediatek/mt8173/mt8173-rt5650-rt5514.c    |  23 +-
 .../mediatek/mt8173/mt8173-rt5650-rt5676.c    |  23 +-
 sound/soc/mediatek/mt8173/mt8173-rt5650.c     |  23 +-
 .../mediatek/mt8183/mt8183-da7219-max98357.c  |  43 +++-
 .../mt8183/mt8183-mt6358-ts3a227-max98357.c   |  53 +++-
 .../mt8186/mt8186-mt6366-da7219-max98357.c    |   6 +
 sound/soc/qcom/apq8016_sbc.c                  |  37 ++-
 sound/soc/qcom/sc7180.c                       |  40 +++-
 sound/soc/qcom/sc7280.c                       |  34 ++-
 sound/soc/qcom/sdm845.c                       |  32 ++-
 sound/soc/rockchip/rk3399_gru_sound.c         |   7 +-
 sound/soc/rockchip/rockchip_rt5645.c          |  22 +-
 sound/soc/samsung/littlemill.c                |  27 ++-
 sound/soc/samsung/lowland.c                   |   8 +-
 sound/soc/samsung/midas_wm1811.c              |  25 +-
 27 files changed, 668 insertions(+), 146 deletions(-)


base-commit: 626c67169f9972fffcdf3bc3864de421f162ebf5
-- 
2.40.1

[PATCH 01/27] ASoC: amd: acp-da7219-max98357a: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/amd/acp-da7219-max98357a.c | 41 +++++++++++++++++++++-------
 1 file changed, 31 insertions(+), 10 deletions(-)

diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index 7464ca2b596c..9e3133bec2b1 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -28,6 +28,21 @@
 #define RT5682_PLL_FREQ (48000 * 512)
 
 static struct snd_soc_jack cz_jack;
+static struct snd_soc_jack_pin cz_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Line Out",
+		.mask = SND_JACK_LINEOUT,
+	},
+};
+
 static struct clk *da7219_dai_wclk;
 static struct clk *da7219_dai_bclk;
 static struct clk *rt5682_dai_wclk;
@@ -66,11 +81,13 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd)
 	if (IS_ERR(da7219_dai_bclk))
 		return PTR_ERR(da7219_dai_bclk);
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				&cz_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &cz_jack,
+					 cz_jack_pins,
+					 ARRAY_SIZE(cz_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
@@ -146,11 +163,13 @@ static int cz_rt5682_init(struct snd_soc_pcm_runtime *rtd)
 	if (IS_ERR(rt5682_dai_bclk))
 		return PTR_ERR(rt5682_dai_bclk);
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &cz_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &cz_jack,
+					 cz_jack_pins,
+					 ARRAY_SIZE(cz_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
@@ -631,6 +650,7 @@ static struct snd_soc_dai_link cz_dai_5682_98357[] = {
 static const struct snd_soc_dapm_widget cz_widgets[] = {
 	SND_SOC_DAPM_HP("Headphones", NULL),
 	SND_SOC_DAPM_SPK("Speakers", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 };
@@ -654,6 +674,7 @@ static const struct snd_soc_dapm_route cz_rt5682_audio_route[] = {
 static const struct snd_kcontrol_new cz_mc_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphones"),
 	SOC_DAPM_PIN_SWITCH("Speakers"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Int Mic"),
 };
-- 
2.40.1

[PATCH 02/27] ASoC: amd: acp-rt5645: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/amd/acp-rt5645.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c
index 532aa98a2241..c8ed1e0b1ccd 100644
--- a/sound/soc/amd/acp-rt5645.c
+++ b/sound/soc/amd/acp-rt5645.c
@@ -42,6 +42,16 @@
 #define CZ_PLAT_CLK 24000000
 
 static struct snd_soc_jack cz_jack;
+static struct snd_soc_jack_pin cz_jack_pins[] = {
+	{
+		.pin = "Headphones",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
 
 static int cz_aif1_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params)
@@ -76,11 +86,13 @@ static int cz_init(struct snd_soc_pcm_runtime *rtd)
 	codec = asoc_rtd_to_codec(rtd, 0)->component;
 	card = rtd->card;
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
-				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				&cz_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &cz_jack,
+					 cz_jack_pins,
+					 ARRAY_SIZE(cz_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 03/27] ASoC: amd: acp: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT5682s,
NAU8825 and NAU8821 codecs used here can detect Headphone and Headset
Mic connections. Expose both to userspace as kcontrols and add the
necessary widgets. Split the jack and pin structs per-codec to
accommodate for per-codec differences.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Do I have to keep the lowercase "jack" in the last one instead?
Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls?
I don't know why it was split as vg_headset / pco_jack, maybe everything
could be merged instead?

 sound/soc/amd/acp/acp-mach-common.c | 226 ++++++++++++++++++++++------
 1 file changed, 182 insertions(+), 44 deletions(-)

diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c
index ff5cbc4a6427..f3abaa182fbb 100644
--- a/sound/soc/amd/acp/acp-mach-common.c
+++ b/sound/soc/amd/acp/acp-mach-common.c
@@ -28,7 +28,6 @@
 #include "../../codecs/nau8821.h"
 #include "acp-mach.h"
 
-static struct snd_soc_jack vg_headset;
 #define PCO_PLAT_CLK 48000000
 #define RT5682_PLL_FREQ (48000 * 512)
 #define DUAL_CHANNEL	2
@@ -52,8 +51,6 @@ const struct dmi_system_id acp_quirk_table[] = {
 };
 EXPORT_SYMBOL_GPL(acp_quirk_table);
 
-static struct snd_soc_jack pco_jack;
-
 static const unsigned int channels[] = {
 	DUAL_CHANNEL,
 };
@@ -87,6 +84,28 @@ static int acp_clk_enable(struct acp_card_drvdata *drvdata,
 SND_SOC_DAILINK_DEF(rt5682,
 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5682:00", "rt5682-aif1")));
 
+static struct snd_soc_jack rt5682_jack;
+static struct snd_soc_jack_pin rt5682_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static const struct snd_kcontrol_new rt5682_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static const struct snd_soc_dapm_widget rt5682_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
 static const struct snd_soc_dapm_route rt5682_map[] = {
 	{ "Headphone Jack", NULL, "HPOL" },
 	{ "Headphone Jack", NULL, "HPOR" },
@@ -110,22 +129,38 @@ static int acp_card_rt5682_init(struct snd_soc_pcm_runtime *rtd)
 	drvdata->wclk = clk_get(component->dev, "rt5682-dai-wclk");
 	drvdata->bclk = clk_get(component->dev, "rt5682-dai-bclk");
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &pco_jack);
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt5682_widgets,
+					ARRAY_SIZE(rt5682_widgets));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add widget dapm controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_add_card_controls(card, rt5682_controls,
+					ARRAY_SIZE(rt5682_controls));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add card controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &rt5682_jack,
+					 rt5682_jack_pins,
+					 ARRAY_SIZE(rt5682_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
 	}
 
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+	snd_jack_set_key(rt5682_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(rt5682_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(rt5682_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(rt5682_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
 
-	ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
+	ret = snd_soc_component_set_jack(component, &rt5682_jack, NULL);
 	if (ret) {
 		dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret);
 		return ret;
@@ -275,6 +310,28 @@ static const struct snd_soc_ops acp_card_rt5682_ops = {
 SND_SOC_DAILINK_DEF(rt5682s,
 		    DAILINK_COMP_ARRAY(COMP_CODEC("i2c-RTL5682:00", "rt5682s-aif1")));
 
+static struct snd_soc_jack rt5682s_jack;
+static struct snd_soc_jack_pin rt5682s_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static const struct snd_kcontrol_new rt5682s_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static const struct snd_soc_dapm_widget rt5682s_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
 static const struct snd_soc_dapm_route rt5682s_map[] = {
 	{ "Headphone Jack", NULL, "HPOL" },
 	{ "Headphone Jack", NULL, "HPOR" },
@@ -299,22 +356,38 @@ static int acp_card_rt5682s_init(struct snd_soc_pcm_runtime *rtd)
 		drvdata->bclk = clk_get(component->dev, "rt5682-dai-bclk");
 	}
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &pco_jack);
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt5682s_widgets,
+					ARRAY_SIZE(rt5682s_widgets));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add widget dapm controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_add_card_controls(card, rt5682s_controls,
+					ARRAY_SIZE(rt5682s_controls));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add card controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &rt5682s_jack,
+					 rt5682s_jack_pins,
+					 ARRAY_SIZE(rt5682s_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
 	}
 
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+	snd_jack_set_key(rt5682s_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(rt5682s_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(rt5682s_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(rt5682s_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
 
-	ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
+	ret = snd_soc_component_set_jack(component, &rt5682s_jack, NULL);
 	if (ret) {
 		dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret);
 		return ret;
@@ -762,6 +835,28 @@ static const struct snd_soc_ops acp_max98388_ops = {
 SND_SOC_DAILINK_DEF(nau8825,
 		    DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10508825:00", "nau8825-hifi")));
 
+static struct snd_soc_jack nau8825_jack;
+static struct snd_soc_jack_pin nau8825_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static const struct snd_kcontrol_new nau8825_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static const struct snd_soc_dapm_widget nau8825_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
 static const struct snd_soc_dapm_route nau8825_map[] = {
 	{ "Headphone Jack", NULL, "HPOL" },
 	{ "Headphone Jack", NULL, "HPOR" },
@@ -780,22 +875,38 @@ static int acp_card_nau8825_init(struct snd_soc_pcm_runtime *rtd)
 	if (drvdata->hs_codec_id != NAU8825)
 		return -EINVAL;
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
+	ret = snd_soc_dapm_new_controls(&card->dapm, nau8825_widgets,
+					ARRAY_SIZE(nau8825_widgets));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add widget dapm controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_add_card_controls(card, nau8825_controls,
+					ARRAY_SIZE(nau8825_controls));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add card controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
 					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
 					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
 					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
-					 &pco_jack);
+					 &nau8825_jack,
+					 nau8825_jack_pins,
+					 ARRAY_SIZE(nau8825_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
 	}
 
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-	snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+	snd_jack_set_key(nau8825_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(nau8825_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(nau8825_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(nau8825_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
 
-	ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
+	ret = snd_soc_component_set_jack(component, &nau8825_jack, NULL);
 	if (ret) {
 		dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret);
 		return ret;
@@ -921,8 +1032,25 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	return ret;
 }
 
+static struct snd_soc_jack nau8821_jack;
+static struct snd_soc_jack_pin nau8821_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static const struct snd_kcontrol_new nau8821_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
 static const struct snd_soc_dapm_widget nau8821_widgets[] = {
-	SND_SOC_DAPM_HP("Headphone jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
@@ -932,12 +1060,12 @@ static const struct snd_soc_dapm_widget nau8821_widgets[] = {
 
 static const struct snd_soc_dapm_route nau8821_audio_route[] = {
 	/* HP jack connectors - unknown if we have jack detection */
-	{ "Headphone jack", NULL, "HPOL" },
-	{ "Headphone jack", NULL, "HPOR" },
+	{ "Headphone Jack", NULL, "HPOL" },
+	{ "Headphone Jack", NULL, "HPOR" },
 	{ "MICL", NULL, "Headset Mic" },
 	{ "MICR", NULL, "Headset Mic" },
 	{ "DMIC", NULL, "Int Mic" },
-	{ "Headphone jack", NULL, "Platform Clock" },
+	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
 	{ "Int Mic", NULL, "Platform Clock" },
 };
@@ -966,21 +1094,31 @@ static int acp_8821_init(struct snd_soc_pcm_runtime *rtd)
 		return ret;
 	}
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &vg_headset);
+	ret = snd_soc_add_card_controls(card, nau8821_controls,
+					ARRAY_SIZE(nau8821_controls));
+	if (ret) {
+		dev_err(rtd->dev, "unable to add card controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &nau8821_jack,
+					 nau8821_jack_pins,
+					 ARRAY_SIZE(nau8821_jack_pins));
 	if (ret) {
 		dev_err(rtd->dev, "Headset Jack creation failed %d\n", ret);
 		return ret;
 	}
-	snd_jack_set_key(vg_headset.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
-	snd_jack_set_key(vg_headset.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-	snd_jack_set_key(vg_headset.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-	snd_jack_set_key(vg_headset.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
 
-	nau8821_enable_jack_detect(component, &vg_headset);
+	snd_jack_set_key(nau8821_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(nau8821_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(nau8821_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(nau8821_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	nau8821_enable_jack_detect(component, &nau8821_jack);
 
 	return snd_soc_dapm_add_routes(&rtd->card->dapm, nau8821_audio_route,
 				       ARRAY_SIZE(nau8821_audio_route));
-- 
2.40.1

[PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT1015
and RT1015p codecs used here can detect Headphone and Headset Mic
connections. Expose the former two to userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls?

 sound/soc/amd/acp3x-rt5682-max9836.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c
index 0543dda75b99..3bf7e1e83c36 100644
--- a/sound/soc/amd/acp3x-rt5682-max9836.c
+++ b/sound/soc/amd/acp3x-rt5682-max9836.c
@@ -28,6 +28,17 @@
 #define DUAL_CHANNEL		2
 
 static struct snd_soc_jack pco_jack;
+static struct snd_soc_jack_pin pco_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
 static struct clk *rt5682_dai_wclk;
 static struct clk *rt5682_dai_bclk;
 static struct gpio_desc *dmic_sel;
@@ -86,11 +97,13 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd)
 	rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk");
 	rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk");
 
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				SND_JACK_HEADSET | SND_JACK_LINEOUT |
-				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				&pco_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &pco_jack,
+					 pco_jack_pins,
+					 ARRAY_SIZE(pco_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "HP jack creation failed %d\n", ret);
 		return ret;
-- 
2.40.1

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Akihiko Odaki]

On 2023/08/03 2:57, Alper Nebi Yasak wrote:
> This driver does not properly map jack pins to kcontrols that PulseAudio
> and PipeWire need to handle jack detection events. The RT5682, RT1015
> and RT1015p codecs used here can detect Headphone and Headset Mic
> connections. Expose the former two to userspace as kcontrols.
> 
> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
> ---
> Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls?

I had patches to remove SND_JACK_LINEOUT and to add separate kcontrols, 
but I forgot them.

Mark Brown has a raised question if the jack is really not driven as a 
line output[1], but I never answered him (sorry for that!) I don't know 
if the hardware is capable, but I think we better to remove it for now 
since the codec driver does not handle it.

Mark, does it sound reasonable?

Regards,
Akihiko Odaki

[1] https://www.spinics.net/lists/alsa-devel/msg147970.html

> 
>   sound/soc/amd/acp3x-rt5682-max9836.c | 23 ++++++++++++++++++-----
>   1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c
> index 0543dda75b99..3bf7e1e83c36 100644
> --- a/sound/soc/amd/acp3x-rt5682-max9836.c
> +++ b/sound/soc/amd/acp3x-rt5682-max9836.c
> @@ -28,6 +28,17 @@
>   #define DUAL_CHANNEL		2
>   
>   static struct snd_soc_jack pco_jack;
> +static struct snd_soc_jack_pin pco_jack_pins[] = {
> +	{
> +		.pin = "Headphone Jack",
> +		.mask = SND_JACK_HEADPHONE,
> +	},
> +	{
> +		.pin = "Headset Mic",
> +		.mask = SND_JACK_MICROPHONE,
> +	},
> +};
> +
>   static struct clk *rt5682_dai_wclk;
>   static struct clk *rt5682_dai_bclk;
>   static struct gpio_desc *dmic_sel;
> @@ -86,11 +97,13 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd)
>   	rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk");
>   	rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk");
>   
> -	ret = snd_soc_card_jack_new(card, "Headset Jack",
> -				SND_JACK_HEADSET | SND_JACK_LINEOUT |
> -				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> -				SND_JACK_BTN_2 | SND_JACK_BTN_3,
> -				&pco_jack);
> +	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
> +					 SND_JACK_HEADSET | SND_JACK_LINEOUT |
> +					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> +					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
> +					 &pco_jack,
> +					 pco_jack_pins,
> +					 ARRAY_SIZE(pco_jack_pins));
>   	if (ret) {
>   		dev_err(card->dev, "HP jack creation failed %d\n", ret);
>   		return ret;

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 371 bytes --]

On Fri, Aug 04, 2023 at 05:04:52PM +0900, Akihiko Odaki wrote:

> Mark Brown has a raised question if the jack is really not driven as a line
> output[1], but I never answered him (sorry for that!) I don't know if the
> hardware is capable, but I think we better to remove it for now since the
> codec driver does not handle it.

> Mark, does it sound reasonable?

Sure.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Akihiko Odaki]

On 2023/08/04 22:11, Mark Brown wrote:
> On Fri, Aug 04, 2023 at 05:04:52PM +0900, Akihiko Odaki wrote:
> 
>> Mark Brown has a raised question if the jack is really not driven as a line
>> output[1], but I never answered him (sorry for that!) I don't know if the
>> hardware is capable, but I think we better to remove it for now since the
>> codec driver does not handle it.
> 
>> Mark, does it sound reasonable?
> 
> Sure.

I see. Alper, can you add a patch to remove SND_JACK_LINEOUT to your series?

Regards,
Akihiko Odaki

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 264 bytes --]

On Fri, Aug 04, 2023 at 10:19:43PM +0900, Akihiko Odaki wrote:

> I see. Alper, can you add a patch to remove SND_JACK_LINEOUT to your series?

Please send an incremental patch on top of the series rather than
resending the full thing given how big the series is.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Akihiko Odaki]

On 2023/08/03 2:57, Alper Nebi Yasak wrote:
> This driver does not properly map jack pins to kcontrols that PulseAudio
> and PipeWire need to handle jack detection events. The RT5682, RT1015
> and RT1015p codecs used here can detect Headphone and Headset Mic
> connections. Expose the former two to userspace as kcontrols.
> 
> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>

Re: [PATCH 04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols

[Akihiko Odaki]

On 2023/08/08 16:47, Akihiko Odaki wrote:
> On 2023/08/03 2:57, Alper Nebi Yasak wrote:
>> This driver does not properly map jack pins to kcontrols that PulseAudio
>> and PipeWire need to handle jack detection events. The RT5682, RT1015
>> and RT1015p codecs used here can detect Headphone and Headset Mic
>> connections. Expose the former two to userspace as kcontrols.
>>
>> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
> 
> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>

Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>

[PATCH 05/27] ASoC: Intel: avs: da7219: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
I'm not sure the use of devm_kmemdup is necessary here, but it's what
avs/boards/nau8825.c does, I copied from that. Is it just to sidestep
the "const" modifier on snd_soc_jack_pin?

Also see a similar construct in nt8625.c (already in linux-next):
https://lore.kernel.org/all/20230629112449.1755928-8-cezary.rojewski@intel.com/

 sound/soc/intel/avs/boards/da7219.c | 34 +++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/avs/boards/da7219.c b/sound/soc/intel/avs/boards/da7219.c
index 964a763732ab..85014d98f7e8 100644
--- a/sound/soc/intel/avs/boards/da7219.c
+++ b/sound/soc/intel/avs/boards/da7219.c
@@ -22,6 +22,7 @@
 static const struct snd_kcontrol_new card_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static int platform_clock_control(struct snd_soc_dapm_widget *w,
@@ -55,6 +56,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 static const struct snd_soc_dapm_widget card_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control,
 			    SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_PRE_PMU),
 };
@@ -68,6 +70,22 @@ static const struct snd_soc_dapm_route card_base_routes[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
+};
+
+static const struct snd_soc_jack_pin card_headset_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Line Out",
+		.mask = SND_JACK_LINEOUT,
+	},
 };
 
 static int avs_da7219_codec_init(struct snd_soc_pcm_runtime *runtime)
@@ -75,7 +93,9 @@ static int avs_da7219_codec_init(struct snd_soc_pcm_runtime *runtime)
 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0);
 	struct snd_soc_component *component = codec_dai->component;
 	struct snd_soc_card *card = runtime->card;
+	struct snd_soc_jack_pin *pins;
 	struct snd_soc_jack *jack;
+	int num_pins;
 	int clk_freq;
 	int ret;
 
@@ -91,14 +111,20 @@ static int avs_da7219_codec_init(struct snd_soc_pcm_runtime *runtime)
 		return ret;
 	}
 
+	num_pins = ARRAY_SIZE(card_headset_pins);
+	pins = devm_kmemdup(card->dev, card_headset_pins, sizeof(*pins) * num_pins, GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
 	/*
 	 * Headset buttons map to the google Reference headset.
 	 * These can be configured by userspace.
 	 */
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADSET | SND_JACK_BTN_0 |
-				    SND_JACK_BTN_1 | SND_JACK_BTN_2 |
-				    SND_JACK_BTN_3 | SND_JACK_LINEOUT, jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADSET | SND_JACK_BTN_0 |
+					 SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+					 SND_JACK_BTN_3 | SND_JACK_LINEOUT,
+					 jack, pins, num_pins);
 	if (ret) {
 		dev_err(card->dev, "Headset Jack creation failed: %d\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 06/27] ASoC: Intel: bxt_da7219_max98357a: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit bbdd4ea2190b4 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Tested on a "Lick" Chromebook.

 sound/soc/intel/boards/bxt_da7219_max98357a.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c
index c593995facaa..cbfff466c5c8 100644
--- a/sound/soc/intel/boards/bxt_da7219_max98357a.c
+++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c
@@ -90,6 +90,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 static const struct snd_kcontrol_new broxton_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const struct snd_kcontrol_new max98357a_controls[] = {
@@ -104,6 +105,7 @@ static const struct snd_kcontrol_new max98390_controls[] = {
 static const struct snd_soc_dapm_widget broxton_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 	SND_SOC_DAPM_SPK("HDMI1", NULL),
 	SND_SOC_DAPM_SPK("HDMI2", NULL),
@@ -150,6 +152,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
 };
 
 static const struct snd_soc_dapm_route max98357a_routes[] = {
@@ -194,6 +197,10 @@ static struct snd_soc_jack_pin jack_pins[] = {
 		.pin    = "Headset Mic",
 		.mask   = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin    = "Line Out",
+		.mask   = SND_JACK_LINEOUT,
+	},
 };
 
 static int broxton_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
-- 
2.40.1

[PATCH 07/27] ASoC: Intel: bytcr_wm5102: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit ecd77d494ec9 ("ASoC: Intel: bytcr_wm5102: Add jack detect
support") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.

The WM5102 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/intel/boards/bytcr_wm5102.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c
index f2382d4cb76f..5c9e06ed1a53 100644
--- a/sound/soc/intel/boards/bytcr_wm5102.c
+++ b/sound/soc/intel/boards/bytcr_wm5102.c
@@ -131,6 +131,7 @@ static const struct snd_soc_dapm_widget byt_wm5102_widgets[] = {
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Internal Mic", NULL),
 	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
 			    platform_clock_control, SND_SOC_DAPM_PRE_PMU |
 			    SND_SOC_DAPM_POST_PMD),
@@ -144,6 +145,7 @@ static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = {
 	{"Headset Mic", NULL, "Platform Clock"},
 	{"Internal Mic", NULL, "Platform Clock"},
 	{"Speaker", NULL, "Platform Clock"},
+	{"Line Out", NULL, "Platform Clock"},
 
 	{"Speaker", NULL, "SPKOUTLP"},
 	{"Speaker", NULL, "SPKOUTLN"},
@@ -177,6 +179,7 @@ static const struct snd_kcontrol_new byt_wm5102_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Internal Mic"),
 	SOC_DAPM_PIN_SWITCH("Speaker"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static struct snd_soc_jack_pin byt_wm5102_pins[] = {
@@ -188,6 +191,10 @@ static struct snd_soc_jack_pin byt_wm5102_pins[] = {
 		.pin	= "Headset Mic",
 		.mask	= SND_JACK_MICROPHONE,
 	},
+	{
+		.pin	= "Line Out",
+		.mask	= SND_JACK_LINEOUT,
+	},
 };
 
 static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime)
-- 
2.40.1

[PATCH 08/27] ASoC: Intel: kbl_da7219_max98357a: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit c2065d43ae85 ("ASoC: Intel: kbl_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/intel/boards/kbl_da7219_max98357a.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c
index 18365ce6bcba..97149513076f 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98357a.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c
@@ -83,12 +83,14 @@ static const struct snd_kcontrol_new kabylake_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Spk"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const struct snd_soc_dapm_widget kabylake_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_SPK("Spk", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 	SND_SOC_DAPM_SPK("HDMI1", NULL),
 	SND_SOC_DAPM_SPK("HDMI2", NULL),
@@ -107,6 +109,10 @@ static struct snd_soc_jack_pin jack_pins[] = {
 		.pin    = "Headset Mic",
 		.mask   = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin    = "Line Out",
+		.mask   = SND_JACK_LINEOUT,
+	},
 };
 
 static const struct snd_soc_dapm_route kabylake_map[] = {
@@ -147,6 +153,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
 };
 
 static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd,
-- 
2.40.1

[PATCH 09/27] ASoC: Intel: kbl_da7219_max98927: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit b9f53b9fc14e ("ASoC: Intel: kbl_da7219_max98927: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/intel/boards/kbl_da7219_max98927.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c
index ad4223fee0c5..a1f8234c77bd 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98927.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98927.c
@@ -102,6 +102,7 @@ static const struct snd_kcontrol_new kabylake_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Left Spk"),
 	SOC_DAPM_PIN_SWITCH("Right Spk"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const struct snd_soc_dapm_widget kabylake_widgets[] = {
@@ -109,6 +110,7 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = {
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_SPK("Left Spk", NULL),
 	SND_SOC_DAPM_SPK("Right Spk", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_MIC("SoC DMIC", NULL),
 	SND_SOC_DAPM_SPK("HDMI1", NULL),
 	SND_SOC_DAPM_SPK("HDMI2", NULL),
@@ -127,6 +129,10 @@ static struct snd_soc_jack_pin jack_pins[] = {
 		.pin    = "Headset Mic",
 		.mask   = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin    = "Line Out",
+		.mask   = SND_JACK_MICROPHONE,
+	},
 };
 
 static const struct snd_soc_dapm_route kabylake_map[] = {
@@ -182,6 +188,7 @@ static const struct snd_soc_dapm_route kabylake_ssp1_map[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
 };
 
 static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream,
-- 
2.40.1

[PATCH 10/27] ASoC: Intel: sof_da7219_max98373: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit 2913bb1f6830 ("ASoC: Intel: sof_da7219_max98373: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/intel/boards/sof_da7219_max98373.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/sof_da7219_max98373.c b/sound/soc/intel/boards/sof_da7219_max98373.c
index 740aa11cb019..bbd47e7e4343 100644
--- a/sound/soc/intel/boards/sof_da7219_max98373.c
+++ b/sound/soc/intel/boards/sof_da7219_max98373.c
@@ -65,6 +65,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 static const struct snd_kcontrol_new controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 	SOC_DAPM_PIN_SWITCH("Left Spk"),
 	SOC_DAPM_PIN_SWITCH("Right Spk"),
 };
@@ -72,6 +73,7 @@ static const struct snd_kcontrol_new controls[] = {
 static const struct snd_kcontrol_new m98360a_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 	SOC_DAPM_PIN_SWITCH("Spk"),
 };
 
@@ -79,6 +81,7 @@ static const struct snd_kcontrol_new m98360a_controls[] = {
 static const struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 
 	SND_SOC_DAPM_SPK("Left Spk", NULL),
 	SND_SOC_DAPM_SPK("Right Spk", NULL),
@@ -98,6 +101,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
 
 	{ "Left Spk", NULL, "Left BE_OUT" },
 	{ "Right Spk", NULL, "Right BE_OUT" },
@@ -110,6 +114,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 static const struct snd_soc_dapm_widget max98360a_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 
 	SND_SOC_DAPM_SPK("Spk", NULL),
 
@@ -128,6 +133,7 @@ static const struct snd_soc_dapm_route max98360a_map[] = {
 
 	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headset Mic", NULL, "Platform Clock" },
+	{ "Line Out", NULL, "Platform Clock" },
 
 	{"Spk", NULL, "Speaker"},
 
@@ -144,6 +150,10 @@ static struct snd_soc_jack_pin jack_pins[] = {
 		.pin    = "Headset Mic",
 		.mask   = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin    = "Line Out",
+		.mask   = SND_JACK_LINEOUT,
+	},
 };
 
 static struct snd_soc_jack headset;
-- 
2.40.1

[PATCH 11/27] ASoC: imx-es8328: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to have a
single detection GPIO pin used to report everything as a Headset. But it
has widgets for Headphone and Mic Jack, so expose both to userspace as
kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Also see https://github.com/xobs/pulseaudio-novena though I don't
really understand PulseAudio configuration.

 sound/soc/fsl/imx-es8328.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c
index 85bd36fb68a2..6f0d031c1d5f 100644
--- a/sound/soc/fsl/imx-es8328.c
+++ b/sound/soc/fsl/imx-es8328.c
@@ -37,6 +37,16 @@ static struct snd_soc_jack_gpio headset_jack_gpios[] = {
 };
 
 static struct snd_soc_jack headset_jack;
+static struct snd_soc_jack_pin headset_jack_pins[] = {
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Mic Jack",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
 
 static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
@@ -46,9 +56,11 @@ static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
 
 	/* Headphone jack detection */
 	if (gpio_is_valid(data->jack_gpio)) {
-		ret = snd_soc_card_jack_new(rtd->card, "Headphone",
-					    SND_JACK_HEADPHONE | SND_JACK_BTN_0,
-					    &headset_jack);
+		ret = snd_soc_card_jack_new_pins(rtd->card, "Headphone",
+						 SND_JACK_HEADSET | SND_JACK_BTN_0,
+						 &headset_jack,
+						 headset_jack_pins,
+						 ARRAY_SIZE(headset_jack_pins));
 		if (ret)
 			return ret;
 
@@ -68,6 +80,11 @@ static const struct snd_soc_dapm_widget imx_es8328_dapm_widgets[] = {
 	SND_SOC_DAPM_REGULATOR_SUPPLY("audio-amp", 1, 0),
 };
 
+static const struct snd_kcontrol_new imx_es8328_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Mic Jack"),
+};
+
 static int imx_es8328_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -183,6 +200,8 @@ static int imx_es8328_probe(struct platform_device *pdev)
 	data->card.dev = dev;
 	data->card.dapm_widgets = imx_es8328_dapm_widgets;
 	data->card.num_dapm_widgets = ARRAY_SIZE(imx_es8328_dapm_widgets);
+	data->card.controls = imx_es8328_controls;
+	data->card.num_controls = ARRAY_SIZE(imx_es8328_controls);
 	ret = snd_soc_of_parse_card_name(&data->card, "model");
 	if (ret) {
 		dev_err(dev, "Unable to parse card name\n");
-- 
2.40.1

[PATCH 12/27] ASoC: mediatek: mt8173-max98090: Configure jack as a Headset jack

[Alper Nebi Yasak]

This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is configuring the jack to only care about
Headphone events. The MAX98090 codec used here can detect both
connections, so configure the jack as such.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
It also appears to support SND_JACK_BTN_0. Not sure if that should be
part of this patch.

 sound/soc/mediatek/mt8173/mt8173-max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index c2b0619b6158..bfb2094758ff 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -70,7 +70,7 @@ static int mt8173_max98090_init(struct snd_soc_pcm_runtime *runtime)
 	struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
 
 	/* enable jack detection */
-	ret = snd_soc_card_jack_new_pins(card, "Headphone", SND_JACK_HEADPHONE,
+	ret = snd_soc_card_jack_new_pins(card, "Headphone", SND_JACK_HEADSET,
 					 &mt8173_max98090_jack,
 					 mt8173_max98090_jack_pins,
 					 ARRAY_SIZE(mt8173_max98090_jack_pins));
-- 
2.40.1

[PATCH 13/27] ASoC: mediatek: mt8173-rt5650-rt5514: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 .../mediatek/mt8173/mt8173-rt5650-rt5514.c    | 23 +++++++++++++++----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index f803f121659d..e502cd1670ba 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -40,6 +40,17 @@ static const struct snd_kcontrol_new mt8173_rt5650_rt5514_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 };
 
+static struct snd_soc_jack_pin mt8173_rt5650_rt5514_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
 static int mt8173_rt5650_rt5514_hw_params(struct snd_pcm_substream *substream,
 					  struct snd_pcm_hw_params *params)
 {
@@ -82,11 +93,13 @@ static int mt8173_rt5650_rt5514_init(struct snd_soc_pcm_runtime *runtime)
 				RT5645_CLK_SEL_I2S1_ASRC);
 
 	/* enable jack detection */
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &mt8173_rt5650_rt5514_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &mt8173_rt5650_rt5514_jack,
+					 mt8173_rt5650_rt5514_jack_pins,
+					 ARRAY_SIZE(mt8173_rt5650_rt5514_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "Can't new Headset Jack %d\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 14/27] ASoC: mediatek: mt8173-rt5650-rt5676: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 .../mediatek/mt8173/mt8173-rt5650-rt5676.c    | 23 +++++++++++++++----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index 8794720cea3a..ffb094284bfb 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -44,6 +44,17 @@ static const struct snd_kcontrol_new mt8173_rt5650_rt5676_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 };
 
+static struct snd_soc_jack_pin mt8173_rt5650_rt5676_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
 static int mt8173_rt5650_rt5676_hw_params(struct snd_pcm_substream *substream,
 					  struct snd_pcm_hw_params *params)
 {
@@ -95,11 +106,13 @@ static int mt8173_rt5650_rt5676_init(struct snd_soc_pcm_runtime *runtime)
 				RT5677_CLK_SEL_I2S2_ASRC);
 
 	/* enable jack detection */
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &mt8173_rt5650_rt5676_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &mt8173_rt5650_rt5676_jack,
+					 mt8173_rt5650_rt5676_jack_pins,
+					 ARRAY_SIZE(mt8173_rt5650_rt5676_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "Can't new Headset Jack %d\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 15/27] ASoC: mediatek: mt8173-rt5650: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Tested on a "Hana" Chromebook.

 sound/soc/mediatek/mt8173/mt8173-rt5650.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index 3ece4b5eaca2..18cf84bb25c7 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -54,6 +54,17 @@ static const struct snd_kcontrol_new mt8173_rt5650_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 };
 
+static struct snd_soc_jack_pin mt8173_rt5650_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
 static int mt8173_rt5650_hw_params(struct snd_pcm_substream *substream,
 				   struct snd_pcm_hw_params *params)
 {
@@ -128,11 +139,13 @@ static int mt8173_rt5650_init(struct snd_soc_pcm_runtime *runtime)
 	}
 
 	/* enable jack detection */
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &mt8173_rt5650_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &mt8173_rt5650_jack,
+					 mt8173_rt5650_jack_pins,
+					 ARRAY_SIZE(mt8173_rt5650_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "Can't new Headset Jack %d\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 16/27] ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 43 ++++++++++++++++---
 1 file changed, 36 insertions(+), 7 deletions(-)

diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index 87bb04846991..701fbcc0f2c9 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -29,6 +29,21 @@ struct mt8183_da7219_max98357_priv {
 	struct snd_soc_jack headset_jack, hdmi_jack;
 };
 
+static struct snd_soc_jack_pin mt8183_da7219_max98357_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+	{
+		.pin	= "Line Out",
+		.mask	= SND_JACK_LINEOUT,
+	},
+};
+
 static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
@@ -572,13 +587,15 @@ mt8183_da7219_max98357_headset_init(struct snd_soc_component *component)
 			snd_soc_card_get_drvdata(component->card);
 
 	/* Enable Headset and 4 Buttons Jack detection */
-	ret = snd_soc_card_jack_new(component->card,
-				    "Headset Jack",
-				    SND_JACK_HEADSET |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-				    SND_JACK_LINEOUT,
-				    &priv->headset_jack);
+	ret = snd_soc_card_jack_new_pins(component->card,
+					 "Headset Jack",
+					 SND_JACK_HEADSET |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+					 SND_JACK_LINEOUT,
+					 &priv->headset_jack,
+					 mt8183_da7219_max98357_jack_pins,
+					 ARRAY_SIZE(mt8183_da7219_max98357_jack_pins));
 	if (ret)
 		return ret;
 
@@ -609,12 +626,18 @@ static struct snd_soc_codec_conf mt6358_codec_conf[] = {
 };
 
 static const struct snd_kcontrol_new mt8183_da7219_max98357_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Speakers"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const
 struct snd_soc_dapm_widget mt8183_da7219_max98357_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_SPK("Speakers", NULL),
+	SND_SOC_DAPM_SPK("Line Out", NULL),
 	SND_SOC_DAPM_PINCTRL("TDM_OUT_PINCTRL",
 			     "aud_tdm_out_on", "aud_tdm_out_off"),
 };
@@ -657,14 +680,20 @@ static struct snd_soc_codec_conf mt8183_da7219_rt1015_codec_conf[] = {
 };
 
 static const struct snd_kcontrol_new mt8183_da7219_rt1015_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("Left Spk"),
 	SOC_DAPM_PIN_SWITCH("Right Spk"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const
 struct snd_soc_dapm_widget mt8183_da7219_rt1015_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_SPK("Left Spk", NULL),
 	SND_SOC_DAPM_SPK("Right Spk", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_PINCTRL("TDM_OUT_PINCTRL",
 			     "aud_tdm_out_on", "aud_tdm_out_off"),
 };
-- 
2.40.1

[PATCH 17/27] ASoC: mediatek: mt8183-mt6358-ts3a227-max98357: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The TS3A227 component
used here can detect Headphones and Headset Mic connections. Expose each
to userspace as kcontrols and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Tested on a "Cozmo" Chromebook.

 .../mt8183/mt8183-mt6358-ts3a227-max98357.c   | 53 ++++++++++++++++---
 1 file changed, 47 insertions(+), 6 deletions(-)

diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index ce9aedde7e1e..850f4d949d97 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -592,11 +592,38 @@ static struct snd_soc_dai_link mt8183_mt6358_ts3a227_dai_links[] = {
 	},
 };
 
+static const
+struct snd_kcontrol_new mt8183_mt6358_ts3a227_max98357_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+static const
+struct snd_soc_dapm_widget mt8183_mt6358_ts3a227_max98357_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static struct snd_soc_jack_pin mt8183_mt6358_ts3a227_max98357_jack_pins[] = {
+	{
+		.pin	= "Headphone",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Headset Mic",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+};
+
 static struct snd_soc_card mt8183_mt6358_ts3a227_max98357_card = {
 	.name = "mt8183_mt6358_ts3a227_max98357",
 	.owner = THIS_MODULE,
 	.dai_link = mt8183_mt6358_ts3a227_dai_links,
 	.num_links = ARRAY_SIZE(mt8183_mt6358_ts3a227_dai_links),
+	.controls = mt8183_mt6358_ts3a227_max98357_snd_controls,
+	.num_controls = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_snd_controls),
+	.dapm_widgets = mt8183_mt6358_ts3a227_max98357_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_dapm_widgets),
 };
 
 static struct snd_soc_card mt8183_mt6358_ts3a227_max98357b_card = {
@@ -604,6 +631,10 @@ static struct snd_soc_card mt8183_mt6358_ts3a227_max98357b_card = {
 	.owner = THIS_MODULE,
 	.dai_link = mt8183_mt6358_ts3a227_dai_links,
 	.num_links = ARRAY_SIZE(mt8183_mt6358_ts3a227_dai_links),
+	.controls = mt8183_mt6358_ts3a227_max98357_snd_controls,
+	.num_controls = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_snd_controls),
+	.dapm_widgets = mt8183_mt6358_ts3a227_max98357_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_dapm_widgets),
 };
 
 static struct snd_soc_codec_conf mt8183_mt6358_ts3a227_rt1015_amp_conf[] = {
@@ -624,6 +655,10 @@ static struct snd_soc_card mt8183_mt6358_ts3a227_rt1015_card = {
 	.num_links = ARRAY_SIZE(mt8183_mt6358_ts3a227_dai_links),
 	.codec_conf = mt8183_mt6358_ts3a227_rt1015_amp_conf,
 	.num_configs = ARRAY_SIZE(mt8183_mt6358_ts3a227_rt1015_amp_conf),
+	.controls = mt8183_mt6358_ts3a227_max98357_snd_controls,
+	.num_controls = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_snd_controls),
+	.dapm_widgets = mt8183_mt6358_ts3a227_max98357_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_dapm_widgets),
 };
 
 static struct snd_soc_card mt8183_mt6358_ts3a227_rt1015p_card = {
@@ -631,6 +666,10 @@ static struct snd_soc_card mt8183_mt6358_ts3a227_rt1015p_card = {
 	.owner = THIS_MODULE,
 	.dai_link = mt8183_mt6358_ts3a227_dai_links,
 	.num_links = ARRAY_SIZE(mt8183_mt6358_ts3a227_dai_links),
+	.controls = mt8183_mt6358_ts3a227_max98357_snd_controls,
+	.num_controls = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_snd_controls),
+	.dapm_widgets = mt8183_mt6358_ts3a227_max98357_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_dapm_widgets),
 };
 
 static int
@@ -641,12 +680,14 @@ mt8183_mt6358_ts3a227_max98357_headset_init(struct snd_soc_component *component)
 			snd_soc_card_get_drvdata(component->card);
 
 	/* Enable Headset and 4 Buttons Jack detection */
-	ret = snd_soc_card_jack_new(component->card,
-				    "Headset Jack",
-				    SND_JACK_HEADSET |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &priv->headset_jack);
+	ret = snd_soc_card_jack_new_pins(component->card,
+					 "Headset Jack",
+					 SND_JACK_HEADSET |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &priv->headset_jack,
+					 mt8183_mt6358_ts3a227_max98357_jack_pins,
+					 ARRAY_SIZE(mt8183_mt6358_ts3a227_max98357_jack_pins));
 	if (ret)
 		return ret;
 
-- 
2.40.1

[PATCH 18/27] ASoC: mediatek: mt8186-mt6366-da7219-max98357: Map missing jack kcontrols

[Alper Nebi Yasak]

Commit 8e9867486806 ("ASoC: mediatek: mt8186-da7219: Expose individual
headset jack pins") maps kcontrols for Headphone and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle jack
detection events for these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
index 0432f9d89020..aa8e00bba19b 100644
--- a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
@@ -46,6 +46,10 @@ static struct snd_soc_jack_pin mt8186_jack_pins[] = {
 		.pin = "Headset Mic",
 		.mask = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin = "Line Out",
+		.mask = SND_JACK_LINEOUT,
+	},
 };
 
 static struct snd_soc_codec_conf mt8186_mt6366_da7219_max98357_codec_conf[] = {
@@ -964,6 +968,7 @@ mt8186_mt6366_da7219_max98357_widgets[] = {
 	SND_SOC_DAPM_SPK("Speakers", NULL),
 	SND_SOC_DAPM_HP("Headphones", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_OUTPUT("HDMI1"),
 	SND_SOC_DAPM_MIXER(SOF_DMA_DL1, SND_SOC_NOPM, 0, 0, NULL, 0),
 	SND_SOC_DAPM_MIXER(SOF_DMA_DL2, SND_SOC_NOPM, 0, 0, NULL, 0),
@@ -996,6 +1001,7 @@ mt8186_mt6366_da7219_max98357_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Speakers"),
 	SOC_DAPM_PIN_SWITCH("Headphones"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 	SOC_DAPM_PIN_SWITCH("HDMI1"),
 };
 
-- 
2.40.1

[PATCH 19/27] ASoC: qcom: apq8016_sbc: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to support
detecting Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Tried to match sound/soc/qcom/common.c a bit. But that seems to be
selected by this, maybe it's jack setup code can be reused?

 sound/soc/qcom/apq8016_sbc.c | 37 ++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)

diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c
index e54b8961112f..6de533d45e7d 100644
--- a/sound/soc/qcom/apq8016_sbc.c
+++ b/sound/soc/qcom/apq8016_sbc.c
@@ -44,6 +44,17 @@ struct apq8016_sbc_data {
 #define DEFAULT_MCLK_RATE		9600000
 #define MI2S_BCLK_RATE			1536000
 
+static struct snd_soc_jack_pin apq8016_sbc_jack_pins[] = {
+	{
+		.pin = "Mic Jack",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
 static int apq8016_dai_init(struct snd_soc_pcm_runtime *rtd, int mi2s)
 {
 	struct snd_soc_dai *codec_dai;
@@ -90,13 +101,15 @@ static int apq8016_dai_init(struct snd_soc_pcm_runtime *rtd, int mi2s)
 	if (!pdata->jack_setup) {
 		struct snd_jack *jack;
 
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-					     SND_JACK_HEADSET |
-					     SND_JACK_HEADPHONE |
-					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-					     SND_JACK_BTN_4,
-					     &pdata->jack);
+		rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
+						  SND_JACK_HEADSET |
+						  SND_JACK_HEADPHONE |
+						  SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						  SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+						  SND_JACK_BTN_4,
+						  &pdata->jack,
+						  apq8016_sbc_jack_pins,
+						  ARRAY_SIZE(apq8016_sbc_jack_pins));
 
 		if (rval < 0) {
 			dev_err(card->dev, "Unable to add Headphone Jack\n");
@@ -255,8 +268,14 @@ static void msm8916_qdsp6_add_ops(struct snd_soc_card *card)
 	}
 }
 
-static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
+static const struct snd_kcontrol_new apq8016_sbc_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Mic Jack"),
+};
 
+static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
 	SND_SOC_DAPM_MIC("Handset Mic", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Secondary Mic", NULL),
@@ -285,6 +304,8 @@ static int apq8016_sbc_platform_probe(struct platform_device *pdev)
 	card->owner = THIS_MODULE;
 	card->dapm_widgets = apq8016_sbc_dapm_widgets;
 	card->num_dapm_widgets = ARRAY_SIZE(apq8016_sbc_dapm_widgets);
+	card->controls = apq8016_sbc_snd_controls;
+	card->num_controls = ARRAY_SIZE(apq8016_sbc_snd_controls);
 
 	ret = qcom_snd_parse_of(card);
 	if (ret)
-- 
2.40.1

[PATCH 20/27] ASoC: qcom: sc7180: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/qcom/sc7180.c | 40 +++++++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
index f5f7c64b23a2..57c5f35dfcc5 100644
--- a/sound/soc/qcom/sc7180.c
+++ b/sound/soc/qcom/sc7180.c
@@ -42,6 +42,17 @@ static void sc7180_jack_free(struct snd_jack *jack)
 	snd_soc_component_set_jack(component, NULL, NULL);
 }
 
+static struct snd_soc_jack_pin sc7180_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
 static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
@@ -51,13 +62,14 @@ static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_jack *jack;
 	int rval;
 
-	rval = snd_soc_card_jack_new(
-			card, "Headset Jack",
-			SND_JACK_HEADSET |
-			SND_JACK_HEADPHONE |
-			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-			SND_JACK_BTN_2 | SND_JACK_BTN_3,
-			&pdata->hs_jack);
+	rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					  SND_JACK_HEADSET |
+					  SND_JACK_HEADPHONE |
+					  SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					  SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					  &pdata->hs_jack,
+					  sc7180_jack_pins,
+					  ARRAY_SIZE(sc7180_jack_pins));
 
 	if (rval < 0) {
 		dev_err(card->dev, "Unable to add Headset Jack\n");
@@ -297,6 +309,11 @@ static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 };
 
+static const struct snd_kcontrol_new sc7180_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
 static const struct snd_soc_dapm_widget sc7180_adau7002_snd_widgets[] = {
 	SND_SOC_DAPM_MIC("DMIC", NULL),
 };
@@ -320,6 +337,11 @@ static const struct snd_soc_dapm_widget sc7180_snd_dual_mic_widgets[] = {
 	SND_SOC_DAPM_MUX("Dmic Mux", SND_SOC_NOPM, 0, 0, &sc7180_dmic_mux_control),
 };
 
+static const struct snd_kcontrol_new sc7180_snd_dual_mic_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
 static const struct snd_soc_dapm_route sc7180_snd_dual_mic_audio_route[] = {
 	{"Dmic Mux", "Front Mic", "DMIC"},
 	{"Dmic Mux", "Rear Mic", "DMIC"},
@@ -348,10 +370,14 @@ static int sc7180_snd_platform_probe(struct platform_device *pdev)
 	card->dev = dev;
 	card->dapm_widgets = sc7180_snd_widgets;
 	card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
+	card->controls = sc7180_snd_controls;
+	card->num_controls = ARRAY_SIZE(sc7180_snd_controls);
 
 	if (of_property_read_bool(dev->of_node, "dmic-gpios")) {
 		card->dapm_widgets = sc7180_snd_dual_mic_widgets,
 		card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_dual_mic_widgets),
+		card->controls = sc7180_snd_dual_mic_controls,
+		card->num_controls = ARRAY_SIZE(sc7180_snd_dual_mic_controls),
 		card->dapm_routes = sc7180_snd_dual_mic_audio_route,
 		card->num_dapm_routes = ARRAY_SIZE(sc7180_snd_dual_mic_audio_route),
 		data->dmic_sel = devm_gpiod_get(&pdev->dev, "dmic", GPIOD_OUT_LOW);
-- 
2.40.1

[PATCH 21/27] ASoC: qcom: sc7280: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls?
Would SND_JACK_MECHANICAL be useful as a kcontrol as well?

 sound/soc/qcom/sc7280.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
index 787dd49e03f6..43010e4e2242 100644
--- a/sound/soc/qcom/sc7280.c
+++ b/sound/soc/qcom/sc7280.c
@@ -43,6 +43,17 @@ static void sc7280_jack_free(struct snd_jack *jack)
 	snd_soc_component_set_jack(component, NULL, NULL);
 }
 
+static struct snd_soc_jack_pin sc7280_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
 static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_card *card = rtd->card;
@@ -54,13 +65,15 @@ static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
 	int rval, i;
 
 	if (!pdata->jack_setup) {
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
-					     SND_JACK_MECHANICAL |
-					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
-					     &pdata->hs_jack);
+		rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
+						  SND_JACK_HEADSET | SND_JACK_LINEOUT |
+						  SND_JACK_MECHANICAL |
+						  SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						  SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+						  SND_JACK_BTN_4 | SND_JACK_BTN_5,
+						  &pdata->hs_jack,
+						  sc7280_jack_pins,
+						  ARRAY_SIZE(sc7280_jack_pins));
 
 		if (rval < 0) {
 			dev_err(card->dev, "Unable to add Headset Jack\n");
@@ -361,6 +374,11 @@ static const struct snd_soc_dapm_widget sc7280_snd_widgets[] = {
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 };
 
+static const struct snd_kcontrol_new sc7280_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
 static int sc7280_snd_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
 					 struct snd_pcm_hw_params *params)
 {
@@ -396,6 +414,8 @@ static int sc7280_snd_platform_probe(struct platform_device *pdev)
 
 	card->dapm_widgets = sc7280_snd_widgets;
 	card->num_dapm_widgets = ARRAY_SIZE(sc7280_snd_widgets);
+	card->controls = sc7280_snd_controls;
+	card->num_controls = ARRAY_SIZE(sc7280_snd_controls);
 
 	ret = qcom_snd_parse_of(card);
 	if (ret)
-- 
2.40.1

[PATCH 22/27] ASoC: qcom: sdm845: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5663 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/qcom/sdm845.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 02612af714a8..29d23fe5dfa2 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -42,6 +42,17 @@ struct sdm845_snd_data {
 	struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
 };
 
+static struct snd_soc_jack_pin sdm845_jack_pins[] = {
+	{
+		.pin = "Headphone Jack",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
 
 static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
@@ -242,12 +253,14 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
 
 
 	if (!pdata->jack_setup) {
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-				SND_JACK_HEADSET |
-				SND_JACK_HEADPHONE |
-				SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				&pdata->jack);
+		rval = snd_soc_card_jack_new_pins(card, "Headset Jack",
+						  SND_JACK_HEADSET |
+						  SND_JACK_HEADPHONE |
+						  SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+						  SND_JACK_BTN_2 | SND_JACK_BTN_3,
+						  &pdata->jack,
+						  sdm845_jack_pins,
+						  ARRAY_SIZE(sdm845_jack_pins));
 
 		if (rval < 0) {
 			dev_err(card->dev, "Unable to add Headphone Jack\n");
@@ -539,6 +552,11 @@ static const struct snd_soc_dapm_widget sdm845_snd_widgets[] = {
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 };
 
+static const struct snd_kcontrol_new sdm845_snd_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
 static void sdm845_add_ops(struct snd_soc_card *card)
 {
 	struct snd_soc_dai_link *link;
@@ -572,6 +590,8 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev)
 	card->driver_name = DRIVER_NAME;
 	card->dapm_widgets = sdm845_snd_widgets;
 	card->num_dapm_widgets = ARRAY_SIZE(sdm845_snd_widgets);
+	card->controls = sdm845_snd_controls;
+	card->num_controls = ARRAY_SIZE(sdm845_snd_controls);
 	card->dev = dev;
 	card->owner = THIS_MODULE;
 	dev_set_drvdata(dev, card);
-- 
2.40.1

[PATCH 23/27] ASoC: rk3399-gru-sound: Map missing Line Out jack kcontrol

[Alper Nebi Yasak]

Commit d0508b4f1604 ("ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols
for jack detection") maps kcontrols for Headphones and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle insertion
events for these peripherals.

The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widget.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Tested on a "Kevin" Chromebook.

 sound/soc/rockchip/rk3399_gru_sound.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c
index 5e52e9d60d44..0f704d22d21b 100644
--- a/sound/soc/rockchip/rk3399_gru_sound.c
+++ b/sound/soc/rockchip/rk3399_gru_sound.c
@@ -41,13 +41,17 @@ static struct snd_soc_jack_pin rockchip_sound_jack_pins[] = {
 		.pin = "Headset Mic",
 		.mask = SND_JACK_MICROPHONE,
 	},
-
+	{
+		.pin = "Line Out",
+		.mask = SND_JACK_LINEOUT,
+	},
 };
 
 static const struct snd_soc_dapm_widget rockchip_dapm_widgets[] = {
 	SND_SOC_DAPM_HP("Headphones", NULL),
 	SND_SOC_DAPM_SPK("Speakers", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 	SND_SOC_DAPM_LINE("HDMI", NULL),
 };
@@ -56,6 +60,7 @@ static const struct snd_kcontrol_new rockchip_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphones"),
 	SOC_DAPM_PIN_SWITCH("Speakers"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 	SOC_DAPM_PIN_SWITCH("Int Mic"),
 	SOC_DAPM_PIN_SWITCH("HDMI"),
 };
-- 
2.40.1

[PATCH 24/27] ASoC: rockchip: rockchip_rt5645: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here supports detecting Headphone and Headset Mic connections. Expose
both to userspace as kcontrols.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---

 sound/soc/rockchip/rockchip_rt5645.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_rt5645.c b/sound/soc/rockchip/rockchip_rt5645.c
index e73a342b7953..ef9fdf0386cb 100644
--- a/sound/soc/rockchip/rockchip_rt5645.c
+++ b/sound/soc/rockchip/rockchip_rt5645.c
@@ -22,6 +22,16 @@
 #define DRV_NAME "rockchip-snd-rt5645"
 
 static struct snd_soc_jack headset_jack;
+static struct snd_soc_jack_pin headset_jack_pins[] = {
+	{
+		.pin = "Headphones",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
 
 static const struct snd_soc_dapm_widget rk_dapm_widgets[] = {
 	SND_SOC_DAPM_HP("Headphones", NULL),
@@ -103,11 +113,13 @@ static int rk_init(struct snd_soc_pcm_runtime *runtime)
 	int ret;
 
 	/* Enable Headset and 4 Buttons Jack detection */
-	ret = snd_soc_card_jack_new(card, "Headset Jack",
-				    SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3,
-				    &headset_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset Jack",
+					 SND_JACK_HEADPHONE | SND_JACK_MICROPHONE |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3,
+					 &headset_jack,
+					 headset_jack_pins,
+					 ARRAY_SIZE(headset_jack_pins));
 	if (ret) {
 		dev_err(card->dev, "New Headset Jack failed! (%d)\n", ret);
 		return ret;
-- 
2.40.1

[PATCH 25/27] ASoC: samsung: littlemill: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The WM8958 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
Would SND_JACK_MECHANICAL be useful as a kcontrol as well?

 sound/soc/samsung/littlemill.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/sound/soc/samsung/littlemill.c b/sound/soc/samsung/littlemill.c
index 5d8118e69359..fafadcef234e 100644
--- a/sound/soc/samsung/littlemill.c
+++ b/sound/soc/samsung/littlemill.c
@@ -225,12 +225,15 @@ static int bbclk_ev(struct snd_soc_dapm_widget *w,
 }
 
 static const struct snd_kcontrol_new controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
 	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
 };
 
 static const struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_HP("Headset Mic", NULL),
 
 	SND_SOC_DAPM_MIC("AMIC", NULL),
 	SND_SOC_DAPM_MIC("DMIC", NULL),
@@ -255,6 +258,16 @@ static const struct snd_soc_dapm_route audio_paths[] = {
 };
 
 static struct snd_soc_jack littlemill_headset;
+static struct snd_soc_jack_pin littlemill_headset_pins[] = {
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
 
 static int littlemill_late_probe(struct snd_soc_card *card)
 {
@@ -281,12 +294,14 @@ static int littlemill_late_probe(struct snd_soc_card *card)
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_card_jack_new(card, "Headset",
-				    SND_JACK_HEADSET | SND_JACK_MECHANICAL |
-				    SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-				    SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-				    SND_JACK_BTN_4 | SND_JACK_BTN_5,
-				    &littlemill_headset);
+	ret = snd_soc_card_jack_new_pins(card, "Headset",
+					 SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					 SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+					 SND_JACK_BTN_4 | SND_JACK_BTN_5,
+					 &littlemill_headset,
+					 littlemill_headset_pins,
+					 ARRAY_SIZE(littlemill_headset_pins));
 	if (ret)
 		return ret;
 
-- 
2.40.1

[PATCH 26/27] ASoC: samsung: lowland: Split Line Out jack kcontrol from Headphone

[Alper Nebi Yasak]

This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is also mapping Line Out jack detection events
to the Headphone kcontrol.

The WM5100 codec used here can distinguish Line Out connections from
Headphone connections. Decouple the two, expose Line Out to userspace as
an independent kcontrol and add the necessary widget.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
I'm not sure this is a good idea, but still...

 sound/soc/samsung/lowland.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/samsung/lowland.c b/sound/soc/samsung/lowland.c
index 106770be6fc5..a79df871ea13 100644
--- a/sound/soc/samsung/lowland.c
+++ b/sound/soc/samsung/lowland.c
@@ -22,12 +22,16 @@ static struct snd_soc_jack lowland_headset;
 static struct snd_soc_jack_pin lowland_headset_pins[] = {
 	{
 		.pin = "Headphone",
-		.mask = SND_JACK_HEADPHONE | SND_JACK_LINEOUT,
+		.mask = SND_JACK_HEADPHONE,
 	},
 	{
 		.pin = "Headset Mic",
 		.mask = SND_JACK_MICROPHONE,
 	},
+	{
+		.pin = "Line Out",
+		.mask = SND_JACK_LINEOUT,
+	},
 };
 
 static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
@@ -140,11 +144,13 @@ static const struct snd_kcontrol_new controls[] = {
 	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
 	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
 	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
 };
 
 static const struct snd_soc_dapm_widget widgets[] = {
 	SND_SOC_DAPM_HP("Headphone", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
 
 	SND_SOC_DAPM_SPK("Main Speaker", NULL),
 
-- 
2.40.1

[PATCH 27/27] ASoC: samsung: midas_wm1811: Map missing jack kcontrols

[Alper Nebi Yasak]

This driver does not map jack pins to kcontrols that PulseAudio/PipeWire
need to handle jack detection events. The WM1811 codec used here seems
to support detecting Headphone and Headset Mic connections. Expose each
to userspace as a kcontrol and add the necessary widgets.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
---
There's a "HP" widget as well, should the jack kcontrol use that?
Would SND_JACK_MECHANICAL be useful as a kcontrol as well?

 sound/soc/samsung/midas_wm1811.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/sound/soc/samsung/midas_wm1811.c b/sound/soc/samsung/midas_wm1811.c
index 6931b9a45b3e..44b32f5cddca 100644
--- a/sound/soc/samsung/midas_wm1811.c
+++ b/sound/soc/samsung/midas_wm1811.c
@@ -38,6 +38,17 @@ struct midas_priv {
 	struct snd_soc_jack headset_jack;
 };
 
+static struct snd_soc_jack_pin headset_jack_pins[] = {
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
 static int midas_start_fll1(struct snd_soc_pcm_runtime *rtd, unsigned int rate)
 {
 	struct snd_soc_card *card = rtd->card;
@@ -246,6 +257,7 @@ static const struct snd_kcontrol_new midas_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Main Mic"),
 	SOC_DAPM_PIN_SWITCH("Sub Mic"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Headphone"),
 
 	SOC_DAPM_PIN_SWITCH("FM In"),
 };
@@ -261,6 +273,7 @@ static const struct snd_soc_dapm_widget midas_dapm_widgets[] = {
 	SND_SOC_DAPM_LINE("HDMI", NULL),
 	SND_SOC_DAPM_LINE("FM In", midas_fm_set),
 
+	SND_SOC_DAPM_HP("Headphone", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("Main Mic", midas_mic_bias),
 	SND_SOC_DAPM_MIC("Sub Mic", midas_submic_bias),
@@ -305,11 +318,13 @@ static int midas_late_probe(struct snd_soc_card *card)
 		return ret;
 	}
 
-	ret = snd_soc_card_jack_new(card, "Headset",
-			SND_JACK_HEADSET | SND_JACK_MECHANICAL |
-			SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 |
-			SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5,
-			&priv->headset_jack);
+	ret = snd_soc_card_jack_new_pins(card, "Headset",
+					 SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+					 SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+					 SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5,
+					 &priv->headset_jack,
+					 headset_jack_pins,
+					 ARRAY_SIZE(headset_jack_pins));
 	if (ret)
 		return ret;
 
-- 
2.40.1

Re: [PATCH 00/27] ASoC: Map missing jack kcontrols

[Mark Brown]

On Wed, 02 Aug 2023 20:57:10 +0300, Alper Nebi Yasak wrote:
> This patchset adds missing jack kcontrols for each independently
> detectable audio peripheral and maps jack pins to those kcontrols
> accordingly, with the primary intent to enable/improve jack detection
> handling in PulseAudio and PipeWire through JackControl UCM values.
> 
> Usually it's just splitting a joint anything-is-connected "Headset Jack"
> kcontrol (from [1]) into those like "Headphone Jack" and "Headset Mic"
> (similar to a previous series for Intel Chromebooks [2]). This split is
> important to avoid automatically switching to a nonexistent external
> microphone when a headphone-only device is connected.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[01/27] ASoC: amd: acp-da7219-max98357a: Map missing jack kcontrols
        commit: 5532a1cfedda10ec0c5e9edbb8089e6165b532fe
[02/27] ASoC: amd: acp-rt5645: Map missing jack kcontrols
        commit: 596c92fb77a0402b3f2d3ebd36ef6c6aec45faf5
[03/27] ASoC: amd: acp: Map missing jack kcontrols
        commit: 7ac3404c2e21ff6b717fd9ac2f7b352e0149f7bd
[04/27] ASoC: amd: acp3x-rt5682-max9836: Map missing jack kcontrols
        commit: 00c7ee820895c9563b7780f84f1b9420cbfbe6c7
[05/27] ASoC: Intel: avs: da7219: Map missing jack kcontrols
        commit: c699fc46f45bab70a831a56e95d6f6c6e51ac7be
[06/27] ASoC: Intel: bxt_da7219_max98357a: Map missing Line Out jack kcontrol
        commit: 92d7071f751a863fe22aaf8cfdd94f96749e0aa5
[07/27] ASoC: Intel: bytcr_wm5102: Map missing Line Out jack kcontrol
        commit: 4e06382c0d275fa1e365ca2ee9b2286b7c49b07f
[08/27] ASoC: Intel: kbl_da7219_max98357a: Map missing Line Out jack kcontrol
        commit: da09176f1f04baae467c97a4dc8b6d9fa5cd11b8
[09/27] ASoC: Intel: kbl_da7219_max98927: Map missing Line Out jack kcontrol
        commit: 2830bfdbe90b0bf6170f88ca0803fa72e1b1e506
[10/27] ASoC: Intel: sof_da7219_max98373: Map missing Line Out jack kcontrol
        commit: 7265089ade245d062fe8f9938261656ff2a49633
[11/27] ASoC: imx-es8328: Map missing jack kcontrols
        commit: 105e84586bfcbe8e48e386936899c4eb8c00be71
[12/27] ASoC: mediatek: mt8173-max98090: Configure jack as a Headset jack
        commit: 73864428ba983bc35e1efabc2e3ec04c6d87c67c
[13/27] ASoC: mediatek: mt8173-rt5650-rt5514: Map missing jack kcontrols
        commit: 87eb19815fa53220602fa40b77f7e3504bf6b476
[14/27] ASoC: mediatek: mt8173-rt5650-rt5676: Map missing jack kcontrols
        commit: 8badca99caf0cc843341e3ffa87d24f9caa206c9
[15/27] ASoC: mediatek: mt8173-rt5650: Map missing jack kcontrols
        commit: 0ef5533f7b54419f5b108d6004f56c6de78f026d
[16/27] ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols
        commit: 9c7388baa2053f333dc524814be4d95f0c2c8ae7
[17/27] ASoC: mediatek: mt8183-mt6358-ts3a227-max98357: Map missing jack kcontrols
        commit: 09a22368bb87a90a447d901e7f5bf2037f321769
[18/27] ASoC: mediatek: mt8186-mt6366-da7219-max98357: Map missing jack kcontrols
        commit: 26de9cc1b96eecfe9fb9c672272665e97c3cdc59
[19/27] ASoC: qcom: apq8016_sbc: Map missing jack kcontrols
        commit: 45bda58af84ffd5c951267f848c8dc10ea485c06
[20/27] ASoC: qcom: sc7180: Map missing jack kcontrols
        commit: 883bfefca437c9061686fa8d092d5a8fa04d06c8
[21/27] ASoC: qcom: sc7280: Map missing jack kcontrols
        commit: 4ab959e5a11624805983909d18ca7f653bab748c
[22/27] ASoC: qcom: sdm845: Map missing jack kcontrols
        commit: 242372d64e5ee39be518672abd7b797d5cd9521b
[23/27] ASoC: rk3399-gru-sound: Map missing Line Out jack kcontrol
        commit: d60e810a0fa83692116293b4b798ab0273668108
[24/27] ASoC: rockchip: rockchip_rt5645: Map missing jack kcontrols
        commit: 24127e5a07a8eac754be50f537df891ebdadf1b8
[25/27] ASoC: samsung: littlemill: Map missing jack kcontrols
        commit: 4d87362f017ea16b6035906613a1c29095a6134f
[26/27] ASoC: samsung: lowland: Split Line Out jack kcontrol from Headphone
        commit: c9d3401844fa6ec6fa924859dca95bac38b1e1ff
[27/27] ASoC: samsung: midas_wm1811: Map missing jack kcontrols
        commit: d27224a45e5457ad89195d92decdd57596253428

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark