[bug]Broken driver for a SK nic

[<tuxeed@freesurf.fr>]

Hello
I bought a new box with a 64bits proc (Athlon) 512Mo of RAM and so on
I use a 2.6.9rc1 (the most recent I found (in a mag) without ANY internet
connection)under sourcemage
So my nic is:

#dmesg | grep eth0
eth0: Yukon Gigabit Ethernet 10/10/1000Base-T Adaptater

I must use the sk98lin module which is integrated to the kernel well easy.
I recompile the kernel and I modprobe the module:

#modprobe sk98lin
ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11
ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11
eth0: --ERROR--
Class: internal software error
Nr: 0x1ae
Msg: General: Driver release date not initialized
eth0: --ERROR--
Class: internal software error
Nr: 0x1ae
Msg: General: Driver release date not initialized
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adaptater
         PrefPort:A  RlmtMode: check Link State
dhcpcd[2875]: dhcpStart: retrying MAC address request (returned
00:00:00:00:00:00)
eth0: network connection is up #là gros sourire :D
       speed:100
       autonegotiation: yes
       duplex mode: full
       flowctrl:symmetric
       irq moderation: disabled
       scatter-gather: enabled
ASSERT net/ipv4/netfilter/ip_nat_helper.c:428 &ip_nat_lock write locked
I've got this and the pc freeze does anyone get a clue about what goes
wrong?
Thx