From: "Christian Kohlschütter" <christian@kohlschutter.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] regulator: core: Fix off-on-delay-us for always-on/boot-on regulators
Date: Sun, 17 Jul 2022 13:39:24 +0200 [thread overview]
Message-ID: <2B145293-BAAE-40AE-B408-FCFC4A80E46D@kohlschutter.com> (raw)
In-Reply-To: <E25D6465-6475-42B4-90EB-3D2C3CAF3B20@kohlschuetter.com>
This is _somewhat_ related to "[PATCH] regulator: core: Fix off-on-delay-us for always-on/boot-on regulators"
That other patch is the right solution for my specific problem, and no further fixes are necessary.
This change fixes an attempted "bandage" solution (adding an "off-on-delay-us") that we had initially tried to no avail.
While the cleanup not only reduces complexity, it may also prevent future code changes reintroducing the non-delayed cycling after registration.
from arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi:
vcc3v0_sd: vcc3v0-sd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_pwr_h>;
regulator-always-on; // prevents setting last_off upon registration
off-on-delay-us = <500000>; // would not be honored upon regulator_register
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc3v0_sd";
vin-supply = <&vcc3v3_sys>;
};
> Am 17.07.2022 um 13:30 schrieb Christian Kohlschuetter <christian@kohlschuetter.com>:
>
> Regulators marked with "regulator-always-on" or "regulator-boot-on"
> as well as an "off-on-delay-us", may run into cycling issues that are
> hard to detect.
>
> This is caused by the "last_off" state not being initialized in this
> case.
>
> Fix the "last_off" initialization by setting it to the current kernel
> time upon initialization, regardless of always_on/boot_on state.
>
> Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
> ---
> drivers/regulator/core.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index c4d844ffad7a..48ed33ad48c8 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -1522,6 +1522,9 @@ static int set_machine_constraints(struct regulator_dev *rdev)
> }
> }
>
> + if (rdev->desc->off_on_delay)
> + rdev->last_off = ktime_get();
> +
> /* If the constraints say the regulator should be on at this point
> * and we have control then make sure it is enabled.
> */
> @@ -1549,8 +1552,6 @@ static int set_machine_constraints(struct regulator_dev *rdev)
>
> if (rdev->constraints->always_on)
> rdev->use_count++;
> - } else if (rdev->desc->off_on_delay) {
> - rdev->last_off = ktime_get();
> }
>
> print_constraints(rdev);
> --
> 2.36.1
>
>
--
Dr. Christian Kohlschütter
next prev parent reply other threads:[~2022-07-17 11:39 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-17 11:30 Christian Kohlschuetter
2022-07-17 11:39 ` Christian Kohlschütter [this message]
2022-07-17 11:49 ` Christian Kohlschütter
2022-07-18 12:36 ` Mark Brown
2022-07-18 17:24 ` [PATCH REBASE] " Christian Kohlschuetter
2022-07-19 13:57 ` [PATCH] " Mark Brown
2022-07-19 14:02 ` Christian Kohlschuetter
2022-07-19 14:02 ` [PATCH REBASE] " Christian Kohlschütter
2022-07-19 14:27 ` Mark Brown
2022-07-19 14:29 ` Mark Brown
2022-07-19 18:49 ` Christian Kohlschütter
2022-07-19 19:38 ` Mark Brown
2022-07-19 19:39 ` Christian Kohlschütter
2022-07-19 18:48 ` Mark Brown
2022-07-19 18:54 ` Christian Kohlschütter
2022-07-19 18:48 ` Mark Brown
2022-07-19 18:48 ` [PATCH] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2B145293-BAAE-40AE-B408-FCFC4A80E46D@kohlschutter.com \
--to=christian@kohlschutter.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®