[PATCH net-next v2 5/5] PCI: Create OF node for NXP ENETC pseudo-MAC functions

[Claudiu Manoil <claudiu.manoil@nxp.com>]

NXP ENETCv4 pseudo-MAC (PPM) ports can be probed as pure PCI endpoints,
without any "ethernet" node in the static device tree. The ENETC4 driver
describes their fixed link by attaching a fixed-link node to the PCI
function's own OF node, which requires that node to exist.

Request the PCI core to synthesize a per-function OF node for these
devices by registering of_pci_make_dev_node() as a final fixup, following
the existing precedent for the Xilinx, Red Hat and EFAR devices. The
helper is a no-op when the function already has a static OF node, so this
has no effect on platforms that describe ENETC via static DT. It only
takes effect when CONFIG_PCI_DYNAMIC_OF_NODES is enabled.

Both ENETC4 PCI device IDs are covered (0xe101 and 0xe110), since either
can be instantiated as a pseudo-MAC port on S32N79.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
v2:
 - none (reworded the overlay reference to match patch 1's fixed-link
   approach; no functional change)

 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index de9bbccda21f..86f0a182224b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -6391,6 +6391,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, 0x9660, of_pci_make_dev_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PHILIPS, 0xe101, of_pci_make_dev_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PHILIPS, 0xe110, of_pci_make_dev_node);
 
 /*
  * Devices known to require a longer delay before first config space access
-- 
2.34.1