From: Larry Finger <Larry.Finger@lwfinger.net>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Re: Regression in 4.8 - CPU speed set very low
Date: Fri, 23 Sep 2016 21:45:09 -0500 [thread overview]
Message-ID: <2be25c2e-8c10-e62a-3a66-19da8143f2b0@lwfinger.net> (raw)
In-Reply-To: <28fa8706-4251-4d07-6a6a-4ee8d9d1267b@lwfinger.net>
On 09/18/2016 09:54 PM, Larry Finger wrote:
> On 09/14/2016 11:00 AM, Larry Finger wrote:
>> On 09/09/2016 12:39 PM, Larry Finger wrote:
>>> I have found a regression in kernel 4.8-rc2 that causes the speed of my laptop
>>> with an Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz to suddenly have a maximum cpu
>>> frequency of ~400 MHz. Unfortunately, I do not know how to trigger this problem,
>>> thus a bisection is not possible. It usually happens under heavy load, such as a
>>> kernel build or the RPM build of VirtualBox, but it does not always fail with
>>> these loads. In my most recent failure, 'hwinfo --cpu' reports cpu MHz of
>>> 396.130 for #3. The bogomips value is 5787.73, and the cpu clock before the
>>> fault is 3437 MHz. Nothing is logged when this happens.
>>>
>>> If I were to get a patch that would show a backtrace when the maximum CPU
>>> frequency is changed, perhaps it would be possible to track this bug.
>>
>> I have not yet found the bad commit, but I have reduced the range of commits a
>> bit. This bug has been difficult to trigger. So far, it has not taken over 1/2
>> day to appear in bad kernels, thus I am allowing three days before deciding that
>> a given trial is good. I never saw the problem with 4.7 kernels, but I did in
>> 4.8-rc1. I also know that it appeared before commit 581e0cd. Commit 1b05cf6 did
>> not show the bug.
>>
>> Testing continues.
>
> And still does. My bisection seemed to be trending toward an improbable set of
> commits, and I needed to do some other work with the machine, thus I started
> running 4.8-rc6. It failed nearly 48 hours after the reboot, which indicated
> that using 3 days to indicate a "good" trial was likely too short. I am
> currently testing the first of the trial and will run it for at least a week. It
> is unlikely that these tests will be complete before 4,8 is released, even if
> -rc8 is needed. I will keep attempting to find the faulty commit.
My debugging continues. After 7 days of beating on commit f7816ad, I have
concluded that it is likely good. Thus I think the bug lies between commit
581e0cd (bad) and f7816ad (good). I will need to do a long test on commit
1b05cf6, which did not fail with a shorter run.
Larry
next prev parent reply other threads:[~2016-09-24 2:45 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-09 17:39 Larry Finger
2016-09-14 16:00 ` Larry Finger
2016-09-19 2:54 ` Larry Finger
2016-09-24 2:45 ` Larry Finger [this message]
2016-09-26 11:37 ` Rafael J. Wysocki
2016-09-26 16:15 ` Larry Finger
2016-09-26 21:06 ` Rafael J. Wysocki
2016-09-26 21:26 ` Srinivas Pandruvada
2016-09-26 21:30 ` Rafael J. Wysocki
2016-09-26 21:41 ` Srinivas Pandruvada
2016-09-26 21:46 ` Rafael J. Wysocki
2016-09-26 21:28 ` Larry Finger
2016-09-26 21:37 ` Rafael J. Wysocki
2016-09-26 21:46 ` Srinivas Pandruvada
2016-09-26 22:15 ` Larry Finger
2016-09-26 22:09 ` Larry Finger
2016-09-26 22:16 ` Rafael J. Wysocki
2016-09-26 23:53 ` Larry Finger
2016-09-27 0:21 ` Rafael J. Wysocki
2016-09-27 0:48 ` Larry Finger
2016-09-27 1:30 ` Srinivas Pandruvada
2016-09-27 2:53 ` Larry Finger
2016-09-27 3:12 ` Doug Smythies
2016-09-27 8:48 ` Larry Finger
2016-09-27 11:46 ` Rafael J. Wysocki
2016-09-29 2:22 ` Larry Finger
2016-09-29 12:19 ` Rafael J. Wysocki
2016-09-29 15:09 ` Larry Finger
2016-09-29 15:56 ` Srinivas Pandruvada
2016-09-29 16:24 ` Larry Finger
2016-09-29 20:52 ` Rafael J. Wysocki
2016-09-30 21:52 ` Larry Finger
2016-09-27 14:51 ` Lennart Sorensen
2016-09-29 2:26 ` Larry Finger
2016-09-29 14:17 ` Lennart Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2be25c2e-8c10-e62a-3a66-19da8143f2b0@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®