[PATCH v5 13/13] x86/sev: Allow non-VMPL0 execution when an SVSM is present

[Tom Lendacky <thomas.lendacky@amd.com>]

To allow execution at a level other than VMPL0, an SVSM must be present.
Allow the SEV-SNP guest to continue booting if an SVSM is detected and
the hypervisor supports the SVSM feature as indicated in the GHCB
hypervisor features bitmap.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 arch/x86/boot/compressed/sev.c    | 17 ++++++++++++++---
 arch/x86/include/asm/sev-common.h |  1 +
 arch/x86/kernel/sev.c             | 20 ++++++++++++--------
 3 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index 1cc3106a3ba7..018c37ec1838 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -609,11 +609,15 @@ void sev_enable(struct boot_params *bp)
 	 * features.
 	 */
 	if (sev_status & MSR_AMD64_SEV_SNP_ENABLED) {
-		if (!(get_hv_features() & GHCB_HV_FT_SNP))
+		u64 hv_features;
+		int ret;
+
+		hv_features = get_hv_features();
+		if (!(hv_features & GHCB_HV_FT_SNP))
 			sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
 
 		/*
-		 * Enforce running at VMPL0.
+		 * Enforce running at VMPL0 or with an SVSM.
 		 *
 		 * Use RMPADJUST (see the rmpadjust() function for a description of
 		 * what the instruction does) to update the VMPL1 permissions of a
@@ -622,7 +626,14 @@ void sev_enable(struct boot_params *bp)
 		 * only ever run at a single VMPL level so permission mask changes of a
 		 * lesser-privileged VMPL are a don't-care.
 		 */
-		if (rmpadjust((unsigned long)&boot_ghcb_page, RMP_PG_SIZE_4K, 1))
+
+		ret = rmpadjust((unsigned long)&boot_ghcb_page, RMP_PG_SIZE_4K, 1);
+
+		/*
+		 * Running at VMPL0 is not required if an SVSM is present and the hypervisor
+		 * supports the required SVSM GHCB events.
+		 */
+		if (ret && !(snp_vmpl && (hv_features & GHCB_HV_FT_SNP_MULTI_VMPL)))
 			sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_NOT_VMPL0);
 	}
 
diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 78a4c25119da..e90d403f2068 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -122,6 +122,7 @@ enum psc_op {
 
 #define GHCB_HV_FT_SNP			BIT_ULL(0)
 #define GHCB_HV_FT_SNP_AP_CREATION	BIT_ULL(1)
+#define GHCB_HV_FT_SNP_MULTI_VMPL	BIT_ULL(5)
 
 /*
  * SNP Page State Change NAE event
diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index f4ae1d037b04..b7f3c767ef00 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -2349,23 +2349,27 @@ static void dump_cpuid_table(void)
  * expected, but that initialization happens too early in boot to print any
  * sort of indicator, and there's not really any other good place to do it,
  * so do it here.
+ *
+ * If running as an SNP guest, report the current VM privilege level (VMPL).
  */
-static int __init report_cpuid_table(void)
+static int __init report_snp_info(void)
 {
 	const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table();
 
-	if (!cpuid_table->count)
-		return 0;
+	if (cpuid_table->count) {
+		pr_info("Using SNP CPUID table, %d entries present.\n",
+			cpuid_table->count);
 
-	pr_info("Using SNP CPUID table, %d entries present.\n",
-		cpuid_table->count);
+		if (sev_cfg.debug)
+			dump_cpuid_table();
+	}
 
-	if (sev_cfg.debug)
-		dump_cpuid_table();
+	if (cc_platform_has(CC_ATTR_GUEST_SEV_SNP))
+		pr_info("SNP running at VMPL%u.\n", snp_vmpl);
 
 	return 0;
 }
-arch_initcall(report_cpuid_table);
+arch_initcall(report_snp_info);
 
 static int __init init_sev_config(char *str)
 {
-- 
2.43.2