Re: 2.6.21-rc3-mm2

Re: 2.6.21-rc3-mm2

[Michael]

Hello Andrew,

I found a little "hickup" in the mm kernel series since 2.6.21-rc2-mm1/mm2.
1.) appeared while boot (no VFS mounted at time)

BUG: at arch/i386/mm/highmem.c:61 kmap_atomic()
 [<c011583b>]  [<c03340b5>]  [<c033455c>]  [<c0297d57>]  [<c032e10f>]
[<c0332728>]  [<c033be08>]  [<c032500b>]  [<c0319d59>]  [<c01425c5>]
[<c014395d>]  [<c01056fb>]  [<c0516540>]  [<c01035a7>]  [<c0516540>]
[<c0100be6>]  [<c0100ddd>]  [<c0516d95>]  [<c0516540>]
=======================
BUG: at arch/i386/mm/highmem.c:61 kmap_atomic()
 [<c011583b>]  [<c03340b5>]  [<c033455c>]  [<c032e10f>]  [<c0332728>]
[<c033be08>]  [<c011c1e1>]  [<c01425c5>]  [<c014395d>]  [<c01056fb>]
[<c0516540>]  [<c01035a7>]  [<c0516540>]  [<c0100be6>]  [<c0100ddd>]
[<c0516d95>]  [<c0516540>]  =======================

2.) some time after when I run some ups i hit this
BUG: atomic counter underflow at:

[<f94140a6>]  [<f9414657>]  [<c03d6611>]  [<c03d4c85>]  [<c04175c3>]
[<c03d619b>]  [<c03d5c6a>]  [<c03ca100>]  [<c03ca0b0>]  [<c017657b>]
[<c01149e6>]  [<c017663c>]  [<c01768f2>]  [<c0102ba2>]  [<c0430000>]
=======================

Then in 2.6.21-rc3-mm2

Now for rc3-mm2 the bug of under 1.) of rc2-mm1/mm2 gone.

But still here -> underflow..*huh*
BUG: atomic counter underflow at:
 [<b0270295>]  [<b02da598>]  [<b02db0b8>]  [<b0281b4e>]  [<f1fdd389>]
[<b04081c7>]  [<b0140540>]  [<b0140318>]  [<b015a099>]  [<b015ab57>]
[<b0102ba2>]  [<b0400000>]  =======================

Also I found some mis-beheviour of the Attansic "atl1 driver"
Maybe I address it wrong but I don't know (sure) who is the real maintainer.
Well I looked at atl1_main.c but to be honest there aren't obvious
information to whom/where I should address such issues.

Could you please so kind to address it to the right person?

atl1: hw csum wrong pkt_flag:1600, err_flag:80

All these hickups never appeared in the latest vanilla kernel
2.6.21-rc2 + even the last git-updates
2.6.21-rc3-git3 there is also not such behaviour

Thanks for your patience.

Best regards
Michael

Re: 2.6.21-rc3-mm2

[Roland McGrath]

Previously <linux/ptrace.h> had #include <linux/sched.h>, and mine just had
"struct task_struct;" instead for its forward references.  asm-x86_64/elf.h
uses current->field in the ELF_CORE_COPY_REGS macro, expanded in
linux/elfcore.h in elf_core_copy_regs.  So it needs sched.h but is no
longer getting it implicitly.  Since current appears in asm-x86_64/elf.h,
there is some logic to having #include <linux/sched.h> explicit there
instead of somewhere else.  But to reduce undue perturbation, I'll just
change my patch to preserve the #include in linux/ptrace.h instead.


Thanks,
Roland

Re: 2.6.21-rc3-mm2

[Randy Dunlap]

Sam Ravnborg wrote:
> On Mon, Mar 19, 2007 at 05:27:11PM -0700, Randy Dunlap wrote:
>> On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
>>
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
>>>
>>> - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
>>>   were dropped.
>>>
>>>   This is for A/B comparison purposes, and because those changes crashed on
>>>   one test setup.
>> I don't quite see why this error is happening.  Looks like all
>> the nested #includes should handle it...
>>
>> CONFIG_KEXEC=y
>> CONFIG_CRASH_DUMP=y
>> CONFIG_UTRACE=y
>> # PTRACE=n
>> # PROC_FS=n
>>
>> In file included from arch/x86_64/kernel/crash.c:19:
>> include/linux/elfcore.h: In function 'elf_core_copy_regs':
>> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
>> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
>> make[1]: *** [arch/x86_64/kernel/crash.o] Error 1
>> make: *** [arch/x86_64/kernel] Error 2
> 
> make arch/x86_64/kernel/crash.i
> may tell you a bit more why the includes foes wrong.

That didn't complain or have any errors/warnings, so hopefully
Roland can see something.

-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Re: 2.6.21-rc3-mm2

[Sam Ravnborg]

On Mon, Mar 19, 2007 at 05:27:11PM -0700, Randy Dunlap wrote:
> On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
> 
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> > 
> > - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
> >   were dropped.
> > 
> >   This is for A/B comparison purposes, and because those changes crashed on
> >   one test setup.
> 
> I don't quite see why this error is happening.  Looks like all
> the nested #includes should handle it...
> 
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_UTRACE=y
> # PTRACE=n
> # PROC_FS=n
> 
> In file included from arch/x86_64/kernel/crash.c:19:
> include/linux/elfcore.h: In function 'elf_core_copy_regs':
> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> make[1]: *** [arch/x86_64/kernel/crash.o] Error 1
> make: *** [arch/x86_64/kernel] Error 2

make arch/x86_64/kernel/crash.i
may tell you a bit more why the includes foes wrong.

	Sam

Re: 2.6.21-rc3-mm2

[Randy Dunlap]

[-- Attachment #1: Type: text/plain, Size: 1491 bytes --]

On Mon, 19 Mar 2007 17:39:15 -0700 Andrew Morton wrote:

> On Mon, 19 Mar 2007 17:27:11 -0700
> Randy Dunlap <randy.dunlap@oracle.com> wrote:
> 
> > On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
> > 
> > > 
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> > > 
> > > - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
> > >   were dropped.
> > > 
> > >   This is for A/B comparison purposes, and because those changes crashed on
> > >   one test setup.
> > 
> > I don't quite see why this error is happening.  Looks like all
> > the nested #includes should handle it...
> > 
> > CONFIG_KEXEC=y
> > CONFIG_CRASH_DUMP=y
> > CONFIG_UTRACE=y
> > # PTRACE=n
> > # PROC_FS=n
> > 
> > In file included from arch/x86_64/kernel/crash.c:19:
> > include/linux/elfcore.h: In function 'elf_core_copy_regs':
> > include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> > include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> > make[1]: *** [arch/x86_64/kernel/crash.o] Error 1
> > make: *** [arch/x86_64/kernel] Error 2
> 
> Perhaps it's complaining about undefined pt_regs.  But it's there in asm/ptrace.h
> which is included by linux/ptrace.h.  Perhaps there's an include snafu which is
> causing that inclusion to not work.
> 
> Dunno.  Please send full .config to Roland ;)

attached.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***


[-- Attachment #2: config-ptrace-elfcore --]
[-- Type: application/octet-stream, Size: 30166 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc3-mm2
# Mon Mar 19 17:10:48 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_UTS_NS=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_CPUSETS=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
CONFIG_SLAB=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_KMOD is not set

#
# Process debugging support
#
CONFIG_UTRACE=y

#
# Block layer
#
# CONFIG_BLOCK is not set

#
# Processor type and features
#
# CONFIG_X86_PC is not set
CONFIG_X86_VSMP=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=4096
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_X86_MCE is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR_ALL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_AC is not set
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=y
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_HT_IRQ is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IA32_EMULATION is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Misc devices
#
CONFIG_IBM_ASM=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set

#
# SCSI device support
#
# CONFIG_SCSI_NETLINK is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Network device support
#
# CONFIG_NETDEVICES is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
CONFIG_ISDN=y

#
# Old ISDN4Linux
#
# CONFIG_ISDN_I4L is not set

#
# CAPI subsystem
#
# CONFIG_ISDN_CAPI is not set

#
# Telephony Support
#
CONFIG_PHONE=y
# CONFIG_PHONE_IXJ is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=y
# CONFIG_MOXA_SMARTIO_NEW is not set
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
CONFIG_SPECIALIX=y
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=y
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=y
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=y
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS_CS is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_STUB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=y
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_FSCHER=y
CONFIG_SENSORS_FSCPOS=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
CONFIG_HWMON_DEBUG_CHIP=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set

#
# Encoders/decoders and other helper chips
#

#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=m
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=y
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set

#
# Video decoders
#
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=y
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA7191=y
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=m

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_DC30 is not set
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_SAA7134_ALSA is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set

#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=y
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_MTPAV=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=y
# CONFIG_SND_AU8830 is not set
CONFIG_SND_AZT3328=m
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=m
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
CONFIG_SND_INDIGO=m
# CONFIG_SND_INDIGOIO is not set
CONFIG_SND_INDIGODJ=m
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SONICVIBES=y
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
CONFIG_SND_PDAUDIOCF=m

#
# SoC audio support
#
# CONFIG_SND_SOC is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y

#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_MIDI_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD Card Drivers
#

#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_K8 is not set
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y

#
# RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_ASYNC_TX_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y

#
# Auxiliary Display support
#

#
# Virtualization
#
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y

#
# File systems
#
CONFIG_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=y
CONFIG_RXRPC=y
CONFIG_9P_FS=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Distributed Lock Manager
#

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_PROFILE_LIKELY is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=m
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=m
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: 2.6.21-rc3-mm2

[Andrew Morton]

On Mon, 19 Mar 2007 17:27:11 -0700
Randy Dunlap <randy.dunlap@oracle.com> wrote:

> On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
> 
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> > 
> > - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
> >   were dropped.
> > 
> >   This is for A/B comparison purposes, and because those changes crashed on
> >   one test setup.
> 
> I don't quite see why this error is happening.  Looks like all
> the nested #includes should handle it...
> 
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_UTRACE=y
> # PTRACE=n
> # PROC_FS=n
> 
> In file included from arch/x86_64/kernel/crash.c:19:
> include/linux/elfcore.h: In function 'elf_core_copy_regs':
> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
> make[1]: *** [arch/x86_64/kernel/crash.o] Error 1
> make: *** [arch/x86_64/kernel] Error 2

Perhaps it's complaining about undefined pt_regs.  But it's there in asm/ptrace.h
which is included by linux/ptrace.h.  Perhaps there's an include snafu which is
causing that inclusion to not work.

Dunno.  Please send full .config to Roland ;)

Re: 2.6.21-rc3-mm2

[Randy Dunlap]

On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:

> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> 
> - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
>   were dropped.
> 
>   This is for A/B comparison purposes, and because those changes crashed on
>   one test setup.

I don't quite see why this error is happening.  Looks like all
the nested #includes should handle it...

CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_UTRACE=y
# PTRACE=n
# PROC_FS=n

In file included from arch/x86_64/kernel/crash.c:19:
include/linux/elfcore.h: In function 'elf_core_copy_regs':
include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
include/linux/elfcore.h:103: error: dereferencing pointer to incomplete type
make[1]: *** [arch/x86_64/kernel/crash.o] Error 1
make: *** [arch/x86_64/kernel] Error 2

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Re: 2.6.21-rc3-mm2

[Kay Sievers]

On Mon, 2007-03-19 at 12:55 -0700, Andrew Morton wrote:
> On Mon, 19 Mar 2007 12:17:24 -0700
> Randy Dunlap <randy.dunlap@oracle.com> wrote:
> 
> > On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
> > 
> > > 
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> > > 
> > > - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
> > >   were dropped.
> > > 
> > >   This is for A/B comparison purposes, and because those changes crashed on
> > >   one test setup.
> > 
> > x86_64, with CONFIG_HOTPLUG disabled:
> > 
> > drivers/base/bus.c: In function 'store_drivers_probe':
> > drivers/base/bus.c:747: error: 'driver_helper' undeclared (first use in this function)
> > drivers/base/bus.c:747: error: (Each undeclared identifier is reported only once
> > drivers/base/bus.c:747: error: for each function it appears in.)
> > make[2]: *** [drivers/base/bus.o] Error 1
> > make[1]: *** [drivers/base] Error 2
> > make: *** [drivers] Error 2
> > 
> 
> Due to Kay's
> gregkh-driver-driver-core-udev-triggered-device-driver-binding.patch

I sent an updated patch, that compiles without CONFIG_HOTPLUG to Greg.

Thanks,
Kay

Re: 2.6.21-rc3-mm2

[Andrew Morton]

On Mon, 19 Mar 2007 12:17:24 -0700
Randy Dunlap <randy.dunlap@oracle.com> wrote:

> On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:
> 
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> > 
> > - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
> >   were dropped.
> > 
> >   This is for A/B comparison purposes, and because those changes crashed on
> >   one test setup.
> 
> x86_64, with CONFIG_HOTPLUG disabled:
> 
> drivers/base/bus.c: In function 'store_drivers_probe':
> drivers/base/bus.c:747: error: 'driver_helper' undeclared (first use in this function)
> drivers/base/bus.c:747: error: (Each undeclared identifier is reported only once
> drivers/base/bus.c:747: error: for each function it appears in.)
> make[2]: *** [drivers/base/bus.o] Error 1
> make[1]: *** [drivers/base] Error 2
> make: *** [drivers] Error 2
> 

Due to Kay's
gregkh-driver-driver-core-udev-triggered-device-driver-binding.patch

Re: 2.6.21-rc3-mm2

[Randy Dunlap]

On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:

> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> 
> - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
>   were dropped.
> 
>   This is for A/B comparison purposes, and because those changes crashed on
>   one test setup.

with CONFIG_PROC_FS=n (x86_64):

  LD      .tmp_vmlinux1
kernel/built-in.o: In function `ptrace_start':
ptrace.c:(.text+0x300f9): undefined reference to `ptrace_may_attach'
make: *** [.tmp_vmlinux1] Error 1


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Re: 2.6.21-rc3-mm2

[Randy Dunlap]

On Wed, 7 Mar 2007 20:19:15 -0800 Andrew Morton wrote:

> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/
> 
> - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
>   were dropped.
> 
>   This is for A/B comparison purposes, and because those changes crashed on
>   one test setup.

x86_64, with CONFIG_HOTPLUG disabled:

drivers/base/bus.c: In function 'store_drivers_probe':
drivers/base/bus.c:747: error: 'driver_helper' undeclared (first use in this function)
drivers/base/bus.c:747: error: (Each undeclared identifier is reported only once
drivers/base/bus.c:747: error: for each function it appears in.)
make[2]: *** [drivers/base/bus.o] Error 1
make[1]: *** [drivers/base] Error 2
make: *** [drivers] Error 2


> Changes since 2.6.21-rc3-mm1:
> 
> -lists-add-list-splice-tail.patch
> -sched-remove-sleepavg-from-proc.patch
> -sched-remove-noninteractive-flag.patch
> -sched-implement-180-bit-sched-bitmap.patch
> -sched-implement-rsdl-cpu-scheduler.patch
> -sched-document-rsdl-cpu-scheduler.patch
> 
>  Removed.


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Re: 2.6.21-rc3-mm2

[Con Kolivas]

On Friday 09 March 2007 01:52, Con Kolivas wrote:
> Summary from what I've been able to find:
> x86_32: ok
> x86_64: ok
> x86_64 fat config: scheduler code oops brought on by accessing /proc
> IA64 ok: ok
> Alpha: bitmap error, runs ok

PA-Risc: ok

Now what is it about ppc and Alpha that make it hit the bitmap error on 
startup...

-- 
-ck

Re: 2.6.21-rc3-mm2

[Con Kolivas]

On Thursday 08 March 2007 15:19, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.
>6.21-rc3-mm2/
>
> - This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
>   were dropped.

As for benchmarking between them I haven't seen anyone post anything yet. 
Test.kernel.org is having a field day with both of them ABORTing or WARNing 
without one GOOD so far. Urgh what was the description you gave of -mm to 
Gene?...I don't envy you :(

Apart from your big fat oops on that massive config, I've had people boot it 
also on alpha and IA64. The bitmap error also manifested on alpha but not on 
IA64 (neither oopsed).


So on qemu I can reproduce the oops you're getting with your config (make 
oldconfig all default on top of your config), but I'm getting other wonderful 
related problems too on rc3-mm2. On qemu -mm1 boots mostly without error and 
then crashes nicely when I type 'ps' with a long pause for about twenty 
seconds and then a combination of soft lockups, bitmap errors, and eventually 
hits the BUG_ON I put in bitmap_error(). However, -mm2 also vomits on 
typing 'ps'. 

It pauses and then spits out (fun lines selected from ps output):

    7 ?        serial8250: too much work for irq4
00:00:00 watchdog/1
   88 ?        00:00:0serial8250: too much work for irq4
0 cqueue/1
  137 ?        00:00serial8250: too much work for irq4
:00 aio/0

Checking a few /proc files I see that "serial83250" info littered 
throughout /proc/stat as well. -mm2 does not oops but the proc output is 
variously corrupted.

Interestingly if I don't type 'ps' in the -mm1 qemu it runs fine with no sign 
of a bug... In summary, here I can only reproduce your big fat oops by it 
being triggered by some corruption elsewhere on this config related to /proc 
breakage that I haven't managed to track down. I checked the broken-out 
patches to see which touched /proc and it was oh, most of them. I tried on rc3 
and had the same thing happen. I haven't tried rc3 without rsdl (your config 
takes too darn long to build!).


The bitmap error that you're hitting on ppc I believe is a different issue. I 
don't have hardware that does it at my end but one user has hit it also on 
alpha and is trying to help me find the root cause. If we change it from 
being a once only printk to every time, it seems to go away after 10 mins of 
runtime never to return again. What could possibly change over that time for 
the error never to return again is a mystery. This part definitely looks to 
be my fault but a bug "getting better and going away" is a new one for me. I 
have to think about some timer interaction although I don't use jiffies or 
timers directly at all in my code. It also happens on 2.6.20 with RSDL.


Summary from what I've been able to find:
x86_32: ok
x86_64: ok
x86_64 fat config: scheduler code oops brought on by accessing /proc
IA64 ok: ok
Alpha: bitmap error, runs ok


I'm off to pass out for now so that I'm of some use to the rest of my 
existence tomorrow.

-- 
-ck

2.6.21-rc3-mm2

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc3/2.6.21-rc3-mm2/

- This is the same as 2.6.21-rc3-mm1, except Con's CPU scheduler changes
  were dropped.

  This is for A/B comparison purposes, and because those changes crashed on
  one test setup.



Changes since 2.6.21-rc3-mm1:

-lists-add-list-splice-tail.patch
-sched-remove-sleepavg-from-proc.patch
-sched-remove-noninteractive-flag.patch
-sched-implement-180-bit-sched-bitmap.patch
-sched-implement-rsdl-cpu-scheduler.patch
-sched-document-rsdl-cpu-scheduler.patch

 Removed.