mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Sven Peter" <sven@svenpeter.dev>
To: "Heikki Krogerus" <heikki.krogerus@linux.intel.com>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Guido Günther" <agx@sigxcpu.org>,
	"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Hector Martin" <marcan@marcan.st>,
	"Mohamed Mediouni" <mohamed.mediouni@caramail.com>,
	"Stan Skowronek" <stan@corellium.com>,
	"Mark Kettenis" <mark.kettenis@xs4all.nl>,
	"Alexander Graf" <graf@amazon.com>,
	"Alyssa Rosenzweig" <alyssa@rosenzweig.io>
Subject: Re: [RFT PATCH 2/9] usb: typec: tipd: Prepare supporting different variants
Date: Wed, 22 Sep 2021 16:55:39 +0200	[thread overview]
Message-ID: <2de8da5a-eefb-487f-aaae-93bbc08ca7ef@www.fastmail.com> (raw)
In-Reply-To: <YUnZuOnyvoqsiRQj@kuha.fi.intel.com>

Hi,

Thanks a lot for quick review!

On Tue, Sep 21, 2021, at 15:10, Heikki Krogerus wrote:
> Hi,
>
> On Sat, Sep 18, 2021 at 02:09:27PM +0200, Sven Peter wrote:
>> Apple M1 machines come with a variant of the TI TPS6598x and will need
>> some changes to the current logic. Let's prepare for that by setting up
>> the infrastructure required to support different variants of this chip
>> identified by the DT compatible.
>
> I think in this case it would make sense to just squash this into the
> next patch.

Sure, and taking into account your review for the later patches I will
probably squash most of them into a single commit now.

>
>> Signed-off-by: Sven Peter <sven@svenpeter.dev>
>> ---
>>  drivers/usb/typec/tipd/core.c | 19 ++++++++++++++++++-
>>  1 file changed, 18 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
>> index 21b3ae25c76d..656020e7f533 100644
>> --- a/drivers/usb/typec/tipd/core.c
>> +++ b/drivers/usb/typec/tipd/core.c
>> @@ -9,6 +9,7 @@
>>  #include <linux/i2c.h>
>>  #include <linux/acpi.h>
>>  #include <linux/module.h>
>> +#include <linux/of_device.h>
>>  #include <linux/power_supply.h>
>>  #include <linux/regmap.h>
>>  #include <linux/interrupt.h>
>> @@ -76,6 +77,10 @@ static const char *const modes[] = {
>>  /* Unrecognized commands will be replaced with "!CMD" */
>>  #define INVALID_CMD(_cmd_)		(_cmd_ == 0x444d4321)
>>  
>> +struct tps6598x_hw {
>> +};
>
> Black line here.
>
>> +static const struct tps6598x_hw ti_tps6598x_data;
>> +
>>  struct tps6598x {
>>  	struct device *dev;
>>  	struct regmap *regmap;
>> @@ -91,6 +96,8 @@ struct tps6598x {
>>  	struct power_supply *psy;
>>  	struct power_supply_desc psy_desc;
>>  	enum power_supply_usb_type usb_type;
>> +
>> +	const struct tps6598x_hw *hw;
>>  };
>>  
>>  static enum power_supply_property tps6598x_psy_props[] = {
>> @@ -590,6 +597,13 @@ static int tps6598x_probe(struct i2c_client *client)
>>  	if (!tps)
>>  		return -ENOMEM;
>>  
>> +	if (client->dev.of_node)
>> +		tps->hw = of_device_get_match_data(&client->dev);
>> +	else
>> +		tps->hw = &ti_tps6598x_data;
>> +	if (!tps->hw)
>> +		return -EINVAL;
>
> 	tps->hw = of_device_get_match_data(&client->dev);
>         if (!tps->hw)
> 		tps->hw = &ti_tps6598x_data;
>

Ah yes, that's indeed much nicer!

>>  	mutex_init(&tps->lock);
>>  	tps->dev = &client->dev;
>>  
>> @@ -729,8 +743,11 @@ static int tps6598x_remove(struct i2c_client *client)
>>  	return 0;
>>  }
>>  
>> +static const struct tps6598x_hw ti_tps6598x_data = {
>> +};
>
> You could also move that above tps6598x_probe() and get rid of the
> forward declaration.

Ack.



Best,

Sven

  reply	other threads:[~2021-09-22 14:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-18 12:09 [RFT PATCH 0/9] usb: typec: tipd: Add Apple M1 support Sven Peter
2021-09-18 12:09 ` [RFT PATCH 1/9] dt-bindings: usb: tps6598x: Add Apple CD321x compatible Sven Peter
2021-09-19 11:25   ` Alyssa Rosenzweig
2021-09-22 20:38   ` Rob Herring
2021-09-18 12:09 ` [RFT PATCH 2/9] usb: typec: tipd: Prepare supporting different variants Sven Peter
2021-09-19 11:27   ` Alyssa Rosenzweig
2021-09-21 13:10   ` Heikki Krogerus
2021-09-22 14:55     ` Sven Peter [this message]
2021-09-18 12:09 ` [RFT PATCH 3/9] usb: typec: tipd: Allow irq controller selection Sven Peter
2021-09-19 11:28   ` Alyssa Rosenzweig
2021-09-21 13:21   ` Heikki Krogerus
2021-09-22 14:56     ` Sven Peter
2021-09-18 12:09 ` [RFT PATCH 4/9] usb: typec: tipd: Add short-circuit for no irqs Sven Peter
2021-09-21 13:23   ` Heikki Krogerus
2021-09-18 12:09 ` [RFT PATCH 5/9] usb: typec: tipd: Allow to configure irq bits Sven Peter
2021-09-21 13:34   ` Heikki Krogerus
2021-09-22 14:58     ` Sven Peter
2021-09-18 12:09 ` [RFT PATCH 6/9] usb: typec: tipd: Setup IntMask explicitly Sven Peter
2021-09-19 11:31   ` Alyssa Rosenzweig
2021-09-21 13:40   ` Heikki Krogerus
2021-09-22 14:58     ` Sven Peter
2021-09-18 12:09 ` [RFT PATCH 7/9] usb: typec: tipd: Add support for apple,cd321x Sven Peter
2021-09-19 11:32   ` Alyssa Rosenzweig
2021-09-18 12:09 ` [RFT PATCH 8/9] usb: typec: tipd: Switch power state to S0 for Apple variant Sven Peter
2021-09-19 11:33   ` Alyssa Rosenzweig
2021-09-21 13:46   ` Heikki Krogerus
2021-09-22 15:00     ` Sven Peter
2021-09-18 12:09 ` [RFT PATCH 9/9] usb: typec: tipd: Remove FIXME about testing with I2C_FUNC_I2C Sven Peter
2021-09-19 11:33   ` Alyssa Rosenzweig
2021-09-21 13:41   ` Heikki Krogerus
2021-09-19 11:35 ` [RFT PATCH 0/9] usb: typec: tipd: Add Apple M1 support Alyssa Rosenzweig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2de8da5a-eefb-487f-aaae-93bbc08ca7ef@www.fastmail.com \
    --to=sven@svenpeter.dev \
    --cc=agx@sigxcpu.org \
    --cc=alyssa@rosenzweig.io \
    --cc=bryan.odonoghue@linaro.org \
    --cc=graf@amazon.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=mark.kettenis@xs4all.nl \
    --cc=mohamed.mediouni@caramail.com \
    --cc=stan@corellium.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome