From: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org, patches@opensource.cirrus.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/4] ASoC: dt-bindings: cs35l45: Adds ABPE properties
Date: Fri, 13 Nov 2026 10:31:33 -0600 [thread overview]
Message-ID: <2e00b4ef-08ab-4c1c-8aa1-91cae559a140@opensource.cirrus.com> (raw)
In-Reply-To: <20261113-handsome-original-shrimp-abfae3@quoll>
On 11/13/26 4:41 AM, Krzysztof Kozlowski wrote:
> On Mon, Nov 09, 2026 at 11:57:03AM -0600, Ricardo Rivera-Matos wrote:
>> Adds devicetree properties to configure the amplifier brownout
>> prevention engine (ABPE).
>>
>> Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
>> ---
>> .../devicetree/bindings/sound/cirrus,cs35l45.yaml | 161 +++++++++++++++++++++
>> 1 file changed, 161 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
>> index e674811b22b2..2c118fa57ad1 100644
>> --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
>> +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
>> @@ -16,6 +16,62 @@ description: |
>>
>> allOf:
>> - $ref: dai-common.yaml#
>
> Entire allOf goes to the bottom, before additional/unevaluatedProps
Ack, will fix in a follow-up patch.>
>> + - if:
>> + required:
>> + - cirrus,amplifier-bpe-enable
>> + then:
>> + required:
>> + - cirrus,amplifier-bpe-response-mode
>> + - cirrus,amplifier-bpe-thresholds-microvolt
>> + - cirrus,amplifier-bpe-attack-rates
>> + - cirrus,amplifier-bpe-hold-times-us
>
> ...
>
>> + cirrus,amplifier-bpe-attenuation-levels-db:
>> + description:
>> + Amplifier BPE logarithmic audio output attenuation for levels L3, L2,
>> + L1, L0, in whole dB steps. Half dB hardware settings are not
>> + supported.
>> + minItems: 4
>> + maxItems: 4
>> + items:
>> + minimum: 0
>> + maximum: 15
>> +
>> + cirrus,amplifier-bpe-attenuation-levels-microvolt:
>> + description: |
>
> Drop |, other places as well unless you need it.
Ack, will fix in a follow-up patch.
>
>> + Amplifier BPE linear voltage audio output attenuation for levels L3,
>> + L2, L1, L0.
>> + minItems: 4
>> + maxItems: 4
>> + items:
>> + minimum: 187500
>> + maximum: 1000000
>> + multipleOf: 31250
>> +
>
> Best regards,
> Krzysztof
Ricardo
next prev parent reply other threads:[~2026-11-13 16:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 17:57 [PATCH 0/4] ASoC: cs35l45: Adds support for brownout prevention engines Ricardo Rivera-Matos via B4 Relay
2026-11-09 17:57 ` [PATCH 1/4] ASoC: dt-bindings: cs35l45: Adds ABPE properties Ricardo Rivera-Matos via B4 Relay
2026-11-13 10:41 ` Krzysztof Kozlowski
2026-11-13 16:31 ` Ricardo Rivera-Matos [this message]
2026-11-09 17:57 ` [PATCH 2/4] ASoC: cs35l45: Adds support for ABPE feature Ricardo Rivera-Matos via B4 Relay
2026-11-09 17:57 ` [PATCH 3/4] ASoC: dt-bindings: cs35l45: Adds Boost BPE properties Ricardo Rivera-Matos via B4 Relay
2026-11-09 17:57 ` [PATCH 4/4] ASoC: cs35l45: Adds Boost BPE configuration Ricardo Rivera-Matos via B4 Relay
2026-11-11 16:14 ` [PATCH 0/4] ASoC: cs35l45: Adds support for brownout prevention engines Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2e00b4ef-08ab-4c1c-8aa1-91cae559a140@opensource.cirrus.com \
--to=rriveram@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david.rhodes@cirrus.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®