From: Kever Yang <kever.yang@rock-chips.com>
To: Elaine Zhang <zhangqing@rock-chips.com>, heiko@sntech.de
Cc: mturquette@baylibre.com, sboyd@kernel.org,
linux-clk@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org, xxx@rock-chips.com,
xf@rock-chips.com, huangtao@rock-chips.com
Subject: Re: [PATCH v2 5/6] clk: rockchip: fix the clk config to support module build
Date: Thu, 3 Sep 2020 18:03:08 +0800 [thread overview]
Message-ID: <2ee0e288-ae7f-5c6a-a5d4-5cee33a05e9e@rock-chips.com> (raw)
In-Reply-To: <20200903063221.10500-1-zhangqing@rock-chips.com>
On 2020/9/3 下午2:32, Elaine Zhang wrote:
> use CONFIG_COMMON_CLK_ROCKCHIP for Rk common clk drivers.
> use CONFIG_CLK_RKXX for Rk soc clk driver.
> Mark configuration to "tristate",
> to support building Rk SoCs clock driver as module.
>
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> ---
> drivers/clk/Kconfig | 1 +
> drivers/clk/rockchip/Kconfig | 78 +++++++++++++++++++++++++++++++++++
> drivers/clk/rockchip/Makefile | 42 ++++++++++---------
> 3 files changed, 101 insertions(+), 20 deletions(-)
> create mode 100644 drivers/clk/rockchip/Kconfig
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 4026fac9fac3..b41aaed9bd51 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -373,6 +373,7 @@ source "drivers/clk/meson/Kconfig"
> source "drivers/clk/mvebu/Kconfig"
> source "drivers/clk/qcom/Kconfig"
> source "drivers/clk/renesas/Kconfig"
> +source "drivers/clk/rockchip/Kconfig"
> source "drivers/clk/samsung/Kconfig"
> source "drivers/clk/sifive/Kconfig"
> source "drivers/clk/sprd/Kconfig"
> diff --git a/drivers/clk/rockchip/Kconfig b/drivers/clk/rockchip/Kconfig
> new file mode 100644
> index 000000000000..53a44396bc35
> --- /dev/null
> +++ b/drivers/clk/rockchip/Kconfig
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# common clock support for ROCKCHIP SoC family.
> +
> +config COMMON_CLK_ROCKCHIP
> + tristate "Rockchip clock controller common support"
> + depends on ARCH_ROCKCHIP
> + default ARCH_ROCKCHIP
> + help
> + Say y here to enable common clock controller.
> +
> +if COMMON_CLK_ROCKCHIP
> +config CLK_PX30
> + tristate "Rockchip Px30 clock controller support"
> + default y
> + help
> + Build the driver for Px30 Clock Driver.
> +
> +config CLK_RV110X
> + tristate "Rockchip Rv110x clock controller support"
> + default y
> + help
> + Build the driver for Rv110x Clock Driver.
> +
> +config CLK_RK3036
> + tristate "Rockchip Rk3036 clock controller support"
> + default y
> + help
> + Build the driver for Rk3036 Clock Driver.
> +
> +config CLK_RK312X
> + tristate "Rockchip Rk312x clock controller support"
> + default y
> + help
> + Build the driver for Rk312x Clock Driver.
> +
> +config CLK_RK3188
> + tristate "Rockchip Rk3188 clock controller support"
> + default y
> + help
> + Build the driver for Rk3188 Clock Driver.
> +
> +config CLK_RK322X
> + tristate "Rockchip Rk322x clock controller support"
> + default y
> + help
> + Build the driver for Rk322x Clock Driver.
> +
> +config CLK_RK3288
> + tristate "Rockchip Rk3288 clock controller support"
> + depends on ARM
> + default y
> + help
> + Build the driver for Rk3288 Clock Driver.
> +
> +config CLK_RK3308
> + tristate "Rockchip Rk3308 clock controller support"
> + default y
> + help
> + Build the driver for Rk3308 Clock Driver.
> +
> +config CLK_RK3328
> + tristate "Rockchip Rk3328 clock controller support"
> + default y
> + help
> + Build the driver for Rk3328 Clock Driver.
> +
> +config CLK_RK3368
> + tristate "Rockchip Rk3368 clock controller support"
> + default y
> + help
> + Build the driver for Rk3368 Clock Driver.
> +
> +config CLK_RK3399
> + tristate "Rockchip Rk3399 clock controller support"
> + default y
> + help
> + Build the driver for Rk3399 Clock Driver.
> +endif
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index 7c5b5813a87c..a99e4d9bbae1 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -3,24 +3,26 @@
> # Rockchip Clock specific Makefile
> #
>
> -obj-y += clk.o
> -obj-y += clk-pll.o
> -obj-y += clk-cpu.o
> -obj-y += clk-half-divider.o
> -obj-y += clk-inverter.o
> -obj-y += clk-mmc-phase.o
> -obj-y += clk-muxgrf.o
> -obj-y += clk-ddr.o
> -obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
> +obj-$(CONFIG_COMMON_CLK_ROCKCHIP) += clk-rockchip.o
>
> -obj-y += clk-px30.o
> -obj-y += clk-rv1108.o
> -obj-y += clk-rk3036.o
> -obj-y += clk-rk3128.o
> -obj-y += clk-rk3188.o
> -obj-y += clk-rk3228.o
> -obj-y += clk-rk3288.o
> -obj-y += clk-rk3308.o
> -obj-y += clk-rk3328.o
> -obj-y += clk-rk3368.o
> -obj-y += clk-rk3399.o
> +clk-rockchip-y += clk.o
> +clk-rockchip-y += clk-pll.o
> +clk-rockchip-y += clk-cpu.o
> +clk-rockchip-y += clk-half-divider.o
> +clk-rockchip-y += clk-inverter.o
> +clk-rockchip-y += clk-mmc-phase.o
> +clk-rockchip-y += clk-muxgrf.o
> +clk-rockchip-y += clk-ddr.o
> +clk-rockchip-$(CONFIG_RESET_CONTROLLER) += softrst.o
> +
> +obj-$(CONFIG_CLK_PX30) += clk-px30.o
> +obj-$(CONFIG_CLK_RV110X) += clk-rv1108.o
> +obj-$(CONFIG_CLK_RK3036) += clk-rk3036.o
> +obj-$(CONFIG_CLK_RK312X) += clk-rk3128.o
> +obj-$(CONFIG_CLK_RK3188) += clk-rk3188.o
> +obj-$(CONFIG_CLK_RK322X) += clk-rk3228.o
> +obj-$(CONFIG_CLK_RK3288) += clk-rk3288.o
> +obj-$(CONFIG_CLK_RK3308) += clk-rk3308.o
> +obj-$(CONFIG_CLK_RK3328) += clk-rk3328.o
> +obj-$(CONFIG_CLK_RK3368) += clk-rk3368.o
> +obj-$(CONFIG_CLK_RK3399) += clk-rk3399.o
This looks good to me, so
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
next prev parent reply other threads:[~2020-09-03 10:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 6:31 [PATCH v2 0/6] clk: rockchip: Support " Elaine Zhang
2020-09-03 6:31 ` [PATCH v2 1/6] clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls Elaine Zhang
2020-09-03 10:02 ` Kever Yang
2020-09-03 12:30 ` kernel test robot
2020-09-03 6:31 ` [PATCH v2 2/6] clk: rockchip: Export rockchip_clk_register_ddrclk() Elaine Zhang
2020-09-03 10:02 ` Kever Yang
2020-09-03 6:31 ` [PATCH v2 3/6] clk: rockchip: Export rockchip_register_softrst() Elaine Zhang
2020-09-03 10:02 ` Kever Yang
2020-09-03 6:31 ` [PATCH v2 4/6] clk: rockchip: Export some clock common APIs for module drivers Elaine Zhang
2020-09-03 10:02 ` Kever Yang
2020-09-03 6:32 ` [PATCH v2 5/6] clk: rockchip: fix the clk config to support module build Elaine Zhang
2020-09-03 10:03 ` Kever Yang [this message]
2020-09-03 6:32 ` [PATCH v2 6/6] clk: rockchip: rk3399: Support " Elaine Zhang
2020-09-03 10:03 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2ee0e288-ae7f-5c6a-a5d4-5cee33a05e9e@rock-chips.com \
--to=kever.yang@rock-chips.com \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=xf@rock-chips.com \
--cc=xxx@rock-chips.com \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®