[PATCH v3 1/5] Bluetooth: btmtk: add the function to get the fw name

[PATCH v3 1/5] Bluetooth: btmtk: add the function to get the fw name

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Include a shared function to get the firmware name, to prevent repeating
code for similar chipsets.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v3: first added to the series
---
 drivers/bluetooth/btmtk.c | 13 +++++++++++++
 drivers/bluetooth/btmtk.h |  6 ++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index e882613036a0..7ead7f967019 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -103,6 +103,19 @@ static void btmtk_coredump_notify(struct hci_dev *hdev, int state)
 	}
 }
 
+void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver)
+{
+	if (dev_id == 0x7925)
+		snprintf(buf, size,
+			 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+			 dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1);
+	else
+		snprintf(buf, size,
+			 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+			 dev_id & 0xffff, (fw_ver & 0xff) + 1);
+}
+EXPORT_SYMBOL_GPL(btmtk_fw_get_filename);
+
 int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 			      wmt_cmd_sync_func_t wmt_cmd_sync)
 {
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 56f5502baadf..ef225980f110 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -159,6 +159,8 @@ int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
 			    u32 fw_version);
 
 int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb);
+
+void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver);
 #else
 
 static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -193,4 +195,8 @@ static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	return -EOPNOTSUPP;
 }
+
+static void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver)
+{
+}
 #endif
-- 
2.25.1

[PATCH v3 2/5] Bluetooth: btmtk: apply the common btmtk_fw_get_filename

[sean.wang]

From: Sean Wang <sean.wang@mediatek.com>

Apply the common btmtk_fw_get_filename to avoid the similar coding in each
driver.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
v3: first added to the series
---
 drivers/bluetooth/btmtksdio.c |  6 +++---
 drivers/bluetooth/btusb.c     | 10 ++--------
 2 files changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index ff4868c83cd8..10bf273120d6 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -1117,9 +1117,9 @@ static int btmtksdio_setup(struct hci_dev *hdev)
 			return err;
 		}
 
-		snprintf(fwname, sizeof(fwname),
-			 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-			 dev_id & 0xffff, (fw_version & 0xff) + 1);
+		btmtk_fw_get_filename(fwname, sizeof(fwname), dev_id,
+				      fw_version);
+
 		err = mt79xx_setup(hdev, fwname);
 		if (err < 0)
 			return err;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7835170b1d66..bad6a9888dca 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3123,14 +3123,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	case 0x7922:
 	case 0x7961:
 	case 0x7925:
-		if (dev_id == 0x7925)
-			snprintf(fw_bin_name, sizeof(fw_bin_name),
-				 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-				 dev_id & 0xffff, dev_id & 0xffff, (fw_version & 0xff) + 1);
-		else
-			snprintf(fw_bin_name, sizeof(fw_bin_name),
-				 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-				 dev_id & 0xffff, (fw_version & 0xff) + 1);
+		btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
+				      fw_version);
 
 		err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
 						btusb_mtk_hci_wmt_sync);
-- 
2.25.1

[PATCH v3 3/5] Bluetooth: btusb: mediatek: refactor the function btusb_mtk_reset

[sean.wang]

From: Hao Qin <hao.qin@mediatek.com>

Extract the function btusb_mtk_subsys_reset from the btusb_mtk_reset
for the future handling of resetting bluetooth controller without
the USB reset.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
---
v3: refine the git message
---
 drivers/bluetooth/btusb.c | 45 +++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index bad6a9888dca..a25543ff6472 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2996,28 +2996,13 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
 	return val & MTK_BT_RST_DONE;
 }
 
-static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
+static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
-	struct btmediatek_data *mediatek;
 	u32 val;
 	int err;
 
-	/* It's MediaTek specific bluetooth reset mechanism via USB */
-	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
-		bt_dev_err(hdev, "last reset failed? Not resetting again");
-		return -EBUSY;
-	}
-
-	err = usb_autopm_get_interface(data->intf);
-	if (err < 0)
-		return err;
-
-	btusb_stop_traffic(data);
-	usb_kill_anchored_urbs(&data->tx_anchor);
-	mediatek = hci_get_priv(hdev);
-
-	if (mediatek->dev_id == 0x7925) {
+	if (dev_id == 0x7925) {
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
 		val |= (1 << 5);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
@@ -3061,8 +3046,32 @@ static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
 	if (!val)
 		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
 
-	usb_queue_reset_device(data->intf);
+	return err;
+}
 
+static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct btmediatek_data *mtk_data;
+	int err;
+
+	/* It's MediaTek specific bluetooth reset mechanism via USB */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return -EBUSY;
+	}
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return err;
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+	mtk_data = hci_get_priv(hdev);
+
+	err = btusb_mtk_subsys_reset(hdev, mtk_data->dev_id);
+
+	usb_queue_reset_device(data->intf);
 	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
 
 	return err;
-- 
2.25.1

[PATCH v3 4/5] Bluetooth: btusb: mediatek: reset the controller before downloading the fw

[sean.wang]

From: Hao Qin <hao.qin@mediatek.com>

Reset the controller before downloading the firmware to improve its
reliability. This includes situations like cold or warm reboots, ensuring
the controller is in its initial state before starting the firmware
download.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
---
v3: split from the v2 to make the patch do one thing in a patch and ensure
    the reset the controller only when we actually need it to avoid the
    regression on the time spent in opening the controller.
---
 drivers/bluetooth/btusb.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a25543ff6472..6cfeec2118e9 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3132,6 +3132,13 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	case 0x7922:
 	case 0x7961:
 	case 0x7925:
+		/* Reset the device to ensure it's in the initial state before
+		 * downloading the firmware to ensure.
+		 */
+
+		if (!test_bit(BTUSB_FIRMWARE_LOADED, &data->flags))
+			btusb_mtk_subsys_reset(hdev, dev_id);
+
 		btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
 				      fw_version);
 
@@ -3139,9 +3146,12 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 						btusb_mtk_hci_wmt_sync);
 		if (err < 0) {
 			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+			clear_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
 			return err;
 		}
 
+		set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+
 		/* It's Device EndPoint Reset Option Register */
 		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
 
-- 
2.25.1

[PATCH v3 5/5] Bluetooth: btusb: mediatek: add MT7922 subsystem reset

[sean.wang]

From: Hao Qin <hao.qin@mediatek.com>

Add the support of MT7922 bluetooth subsystem reset that was called the
auto revert to self-recover from the fatal error in the controller like
the host encounters HCI cmd timeout or the controller crashes.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
---
v3: split from the v2 to make the patch do one thing in a patch.
---
 drivers/bluetooth/btusb.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6cfeec2118e9..3485fefc8bad 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3002,7 +3002,16 @@ static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 	u32 val;
 	int err;
 
-	if (dev_id == 0x7925) {
+	if (dev_id == 0x7922) {
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+		val |= 0x00002020;
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+		val |= BIT(0);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
+		msleep(100);
+	} else if (dev_id == 0x7925) {
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
 		val |= (1 << 5);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
@@ -3042,6 +3051,9 @@ static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 	if (err < 0)
 		bt_dev_err(hdev, "Reset timeout");
 
+	if (dev_id == 0x7922)
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
 		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
-- 
2.25.1