From: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 8/8] media: qcom: iris: split platform data from firmware data
Date: Fri, 13 Mar 2026 13:37:42 +0530 [thread overview]
Message-ID: <2f233008-cdf6-5999-d703-73f58cc0f5ed@oss.qualcomm.com> (raw)
In-Reply-To: <20260313-iris-platform-data-v4-8-14927df4906d@oss.qualcomm.com>
On 3/13/2026 9:00 AM, Dmitry Baryshkov wrote:
> Finalize the logical separation of the software and hardware interface
> descriptions by moving hardware properties to the files specific to the
> particular VPU version.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---
> drivers/media/platform/qcom/iris/Makefile | 6 +-
> .../iris/{iris_platform_gen1.c => iris_hfi_gen1.c} | 133 -------------
> .../iris/{iris_platform_gen2.c => iris_hfi_gen2.c} | 218 ---------------------
> .../platform/qcom/iris/iris_platform_common.h | 4 +
> .../platform/qcom/iris/iris_platform_sm8250.h | 29 +++
> .../platform/qcom/iris/iris_platform_sm8550.h | 31 +++
> .../media/platform/qcom/iris/iris_platform_vpu2.c | 124 ++++++++++++
> .../media/platform/qcom/iris/iris_platform_vpu3.c | 210 ++++++++++++++++++++
> 8 files changed, 402 insertions(+), 353 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/iris/iris_platform_vpu2.c b/drivers/media/platform/qcom/iris/iris_platform_vpu2.c
> new file mode 100644
> index 000000000000..74c8f38e849b
> --- /dev/null
> +++ b/drivers/media/platform/qcom/iris/iris_platform_vpu2.c
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "iris_core.h"
> +#include "iris_ctrls.h"
> +#include "iris_platform_common.h"
> +#include "iris_resources.h"
> +#include "iris_hfi_gen1.h"
> +#include "iris_hfi_gen1_defines.h"
> +#include "iris_vpu_buffer.h"
> +#include "iris_vpu_common.h"
> +#include "iris_instance.h"
> +
> +#include "iris_platform_sc7280.h"
> +#include "iris_platform_sm8250.h"
> +
> +static struct iris_fmt platform_fmts_sm8250_dec[] = {
How about naming this as platform_fmts_vpu2_dec ?
> + [IRIS_FMT_H264] = {
> + .pixfmt = V4L2_PIX_FMT_H264,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> + [IRIS_FMT_HEVC] = {
> + .pixfmt = V4L2_PIX_FMT_HEVC,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> + [IRIS_FMT_VP9] = {
> + .pixfmt = V4L2_PIX_FMT_VP9,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> +};
> +
> +static struct platform_inst_caps platform_inst_cap_sm8250 = {
platform_inst_cap_vpu2 ?
> + .min_frame_width = 128,
> + .max_frame_width = 8192,
> + .min_frame_height = 128,
> + .max_frame_height = 8192,
> + .max_mbpf = 138240,
> + .mb_cycles_vsp = 25,
> + .mb_cycles_vpp = 200,
> + .max_frame_rate = MAXIMUM_FPS,
> + .max_operating_rate = MAXIMUM_FPS,
> +};
> +
> +static const struct icc_info sm8250_icc_table[] = {
icc_table_vpu2 ?
> + { "cpu-cfg", 1000, 1000 },
> + { "video-mem", 1000, 15000000 },
> +};
> +
> +static const char * const sm8250_clk_reset_table[] = { "bus", "core" };
clk_reset_table_vpu2 ? and so on.
> +
> +static const char * const sm8250_pmdomain_table[] = { "venus", "vcodec0" };
> +
> +static const struct tz_cp_config tz_cp_config_sm8250[] = {
> + {
> + .cp_start = 0,
> + .cp_size = 0x25800000,
> + .cp_nonpixel_start = 0x01000000,
> + .cp_nonpixel_size = 0x24800000,
> + },
> +};
> +
> +const struct iris_platform_data sc7280_data = {
> + .firmware_data = &iris_hfi_gen1_data,
> + .vpu_ops = &iris_vpu2_ops,
> + .icc_tbl = sm8250_icc_table,
> + .icc_tbl_size = ARRAY_SIZE(sm8250_icc_table),
> + .bw_tbl_dec = sc7280_bw_table_dec,
> + .bw_tbl_dec_size = ARRAY_SIZE(sc7280_bw_table_dec),
> + .pmdomain_tbl = sm8250_pmdomain_table,
> + .pmdomain_tbl_size = ARRAY_SIZE(sm8250_pmdomain_table),
> + .opp_pd_tbl = sc7280_opp_pd_table,
> + .opp_pd_tbl_size = ARRAY_SIZE(sc7280_opp_pd_table),
> + .clk_tbl = sc7280_clk_table,
> + .clk_tbl_size = ARRAY_SIZE(sc7280_clk_table),
> + .opp_clk_tbl = sc7280_opp_clk_table,
> + /* Upper bound of DMA address range */
> + .dma_mask = 0xe0000000 - 1,
> + .fwname = "qcom/vpu/vpu20_p1.mbn",
> + .inst_iris_fmts = platform_fmts_sm8250_dec,
> + .inst_iris_fmts_size = ARRAY_SIZE(platform_fmts_sm8250_dec),
> + .inst_caps = &platform_inst_cap_sm8250,
> + .tz_cp_config_data = tz_cp_config_sm8250,
> + .tz_cp_config_data_size = ARRAY_SIZE(tz_cp_config_sm8250),
> + .hw_response_timeout = HW_RESPONSE_TIMEOUT_VALUE,
> + .num_vpp_pipe = 1,
> + .no_aon = true,
> + .max_session_count = 16,
> + .max_core_mbpf = 4096 * 2176 / 256 * 2 + 1920 * 1088 / 256,
> + /* max spec for SC7280 is 4096x2176@60fps */
> + .max_core_mbps = 4096 * 2176 / 256 * 60,
> +};
> +
> +const struct iris_platform_data sm8250_data = {
> + .firmware_data = &iris_hfi_gen1_data,
> + .vpu_ops = &iris_vpu2_ops,
> + .icc_tbl = sm8250_icc_table,
> + .icc_tbl_size = ARRAY_SIZE(sm8250_icc_table),
> + .clk_rst_tbl = sm8250_clk_reset_table,
> + .clk_rst_tbl_size = ARRAY_SIZE(sm8250_clk_reset_table),
> + .bw_tbl_dec = sm8250_bw_table_dec,
> + .bw_tbl_dec_size = ARRAY_SIZE(sm8250_bw_table_dec),
> + .pmdomain_tbl = sm8250_pmdomain_table,
> + .pmdomain_tbl_size = ARRAY_SIZE(sm8250_pmdomain_table),
> + .opp_pd_tbl = sm8250_opp_pd_table,
> + .opp_pd_tbl_size = ARRAY_SIZE(sm8250_opp_pd_table),
> + .clk_tbl = sm8250_clk_table,
> + .clk_tbl_size = ARRAY_SIZE(sm8250_clk_table),
> + .opp_clk_tbl = sm8250_opp_clk_table,
> + /* Upper bound of DMA address range */
> + .dma_mask = 0xe0000000 - 1,
> + .fwname = "qcom/vpu-1.0/venus.mbn",
> + .inst_iris_fmts = platform_fmts_sm8250_dec,
> + .inst_iris_fmts_size = ARRAY_SIZE(platform_fmts_sm8250_dec),
> + .inst_caps = &platform_inst_cap_sm8250,
> + .tz_cp_config_data = tz_cp_config_sm8250,
> + .tz_cp_config_data_size = ARRAY_SIZE(tz_cp_config_sm8250),
> + .hw_response_timeout = HW_RESPONSE_TIMEOUT_VALUE,
> + .num_vpp_pipe = 4,
> + .max_session_count = 16,
> + .max_core_mbpf = NUM_MBS_8K,
> + .max_core_mbps = ((7680 * 4320) / 256) * 60,
> +};
> diff --git a/drivers/media/platform/qcom/iris/iris_platform_vpu3.c b/drivers/media/platform/qcom/iris/iris_platform_vpu3.c
> new file mode 100644
> index 000000000000..2c0e5be72920
> --- /dev/null
> +++ b/drivers/media/platform/qcom/iris/iris_platform_vpu3.c
iris_platform_vpu3x.c ?
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2025 Linaro Ltd
> + */
> +
> +#include "iris_core.h"
> +#include "iris_ctrls.h"
> +#include "iris_hfi_gen2.h"
> +#include "iris_hfi_gen2_defines.h"
> +#include "iris_platform_common.h"
> +#include "iris_vpu_buffer.h"
> +#include "iris_vpu_common.h"
> +
> +#include "iris_platform_qcs8300.h"
> +#include "iris_platform_sm8550.h"
> +#include "iris_platform_sm8650.h"
> +#include "iris_platform_sm8750.h"
> +
> +#define VIDEO_ARCH_LX 1
> +
> +static struct iris_fmt platform_fmts_sm8550_dec[] = {
platform_fmts_vpu3x_dec ?
> + [IRIS_FMT_H264] = {
> + .pixfmt = V4L2_PIX_FMT_H264,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> + [IRIS_FMT_HEVC] = {
> + .pixfmt = V4L2_PIX_FMT_HEVC,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> + [IRIS_FMT_VP9] = {
> + .pixfmt = V4L2_PIX_FMT_VP9,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> + [IRIS_FMT_AV1] = {
> + .pixfmt = V4L2_PIX_FMT_AV1,
> + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
> + },
> +};
> +
> +static const struct icc_info sm8550_icc_table[] = {
icc_table_vpu3x ? and so on.
Thanks,
Dikshita
> + { "cpu-cfg", 1000, 1000 },
> + { "video-mem", 1000, 15000000 },
> +};
> +
> +static const struct bw_info sm8550_bw_table_dec[] = {
> + { ((4096 * 2160) / 256) * 60, 1608000 },
> + { ((4096 * 2160) / 256) * 30, 826000 },
> + { ((1920 * 1080) / 256) * 60, 567000 },
> + { ((1920 * 1080) / 256) * 30, 294000 },
> +};
> +
> +static const char * const sm8550_pmdomain_table[] = { "venus", "vcodec0" };
> +
> +static const char * const sm8550_opp_pd_table[] = { "mxc", "mmcx" };
> +
> +static const char * const sm8550_opp_clk_table[] = {
> + "vcodec0_core",
> + NULL,
> +};
> +
> +static const struct tz_cp_config tz_cp_config_sm8550[] = {
> + {
> + .cp_start = 0,
> + .cp_size = 0x25800000,
> + .cp_nonpixel_start = 0x01000000,
> + .cp_nonpixel_size = 0x24800000,
> + },
> +};
next prev parent reply other threads:[~2026-03-13 8:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 3:30 [PATCH v4 0/8] media: qcom: iris: rework platform data handling Dmitry Baryshkov
2026-03-13 3:30 ` [PATCH v4 1/8] media: qcom: iris: drop pas_id from the iris_platform_data struct Dmitry Baryshkov
2026-03-13 3:30 ` [PATCH v4 2/8] media: qcom: iris: use common set_preset_registers function Dmitry Baryshkov
2026-03-13 5:07 ` Dikshita Agarwal
2026-03-13 3:30 ` [PATCH v4 3/8] media: qcom: iris: don't use function indirection in gen2-specific code Dmitry Baryshkov
2026-03-13 3:30 ` [PATCH v4 4/8] media: qcom: iris: split HFI session ops from core ops Dmitry Baryshkov
2026-03-13 7:11 ` Dikshita Agarwal
2026-03-13 3:30 ` [PATCH v4 5/8] media: qcom: iris: merge hfi_response_ops and hfi_command_ops Dmitry Baryshkov
2026-03-13 7:12 ` Dikshita Agarwal
2026-03-13 3:30 ` [PATCH v4 6/8] media: qcom: iris: move get_instance to iris_hfi_sys_ops Dmitry Baryshkov
2026-03-13 7:12 ` Dikshita Agarwal
2026-03-13 3:30 ` [PATCH v4 7/8] media: qcom: iris: split firmware_data from raw platform data Dmitry Baryshkov
2026-03-13 7:49 ` Dikshita Agarwal
2026-03-13 8:07 ` Dmitry Baryshkov
2026-03-13 9:25 ` Dikshita Agarwal
2026-03-16 6:31 ` Dikshita Agarwal
2026-03-16 19:59 ` Dmitry Baryshkov
2026-03-17 5:45 ` Dikshita Agarwal
2026-03-13 8:56 ` Dikshita Agarwal
2026-03-13 16:56 ` Dmitry Baryshkov
2026-03-13 3:30 ` [PATCH v4 8/8] media: qcom: iris: split platform data from firmware data Dmitry Baryshkov
2026-03-13 8:07 ` Dikshita Agarwal [this message]
2026-03-13 19:23 ` Dmitry Baryshkov
2026-03-16 6:29 ` Dikshita Agarwal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2f233008-cdf6-5999-d703-73f58cc0f5ed@oss.qualcomm.com \
--to=dikshita.agarwal@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®