Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP

[Christophe JAILLET <christophe.jaillet@wanadoo.fr>]

Le 28/07/2022 à 19:51, Julien Panis a écrit :
> ECAP hardware on AM62x SoC supports capture feature. It can be used
> to timestamp events (falling/rising edges) detected on signal input pin.
> 
> This commit adds capture driver support for ECAP hardware on AM62x SoC.
> 
> In the ECAP hardware, capture pin can also be configured to be in
> PWM mode. Current implementation only supports capture operating mode.
> Hardware also supports timebase sync between multiple instances, but
> this driver supports simple independent capture functionality.
> 
> Signed-off-by: Julien Panis <jpanis-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>

[...]

> +static int ecap_iio_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
> +
> +	if (ecap_dev->enabled)
> +		ecap_iio_capture_disable(indio_dev);
> +
> +	regmap_exit(ecap_dev->regmap);
> +
> +	pm_runtime_disable(&pdev->dev);

Hi,

should these 2 functions be part of an error handling path of the probe, 
or handled with a devm_add_action_or_reset()?

Just my 2c,

CJ

> +
> +	return 0;
> +}
> +