Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP

[Julien Panis <jpanis@baylibre.com>]

On 28/07/2022 22:02, Christophe JAILLET wrote:
> Le 28/07/2022 à 19:51, Julien Panis a écrit :
>> ECAP hardware on AM62x SoC supports capture feature. It can be used
>> to timestamp events (falling/rising edges) detected on signal input pin.
>>
>> This commit adds capture driver support for ECAP hardware on AM62x SoC.
>>
>> In the ECAP hardware, capture pin can also be configured to be in
>> PWM mode. Current implementation only supports capture operating mode.
>> Hardware also supports timebase sync between multiple instances, but
>> this driver supports simple independent capture functionality.
>>
>> Signed-off-by: Julien Panis 
>> <jpanis-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>
> [...]
>
>> +static int ecap_iio_remove(struct platform_device *pdev)
>> +{
>> +    struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> +    struct ecap_iio_dev *ecap_dev = iio_priv(indio_dev);
>> +
>> +    if (ecap_dev->enabled)
>> +        ecap_iio_capture_disable(indio_dev);
>> +
>> +    regmap_exit(ecap_dev->regmap);
>> +
>> +    pm_runtime_disable(&pdev->dev);
>
> Hi,
>
> should these 2 functions be part of an error handling path of the 
> probe, or handled with a devm_add_action_or_reset()?
>
> Just my 2c,
>
> CJ

Hi Christophe,
That's right, that will be cleaner. Thank you for your suggestion, that 
will be done in next version.
Julien

>
>> +
>> +    return 0;
>> +}
>> +