* [PATCH v2] Move the definition of pr_err() into kernel.h
@ 2007-09-11 18:13 Emil Medve
2007-09-11 19:48 ` Waskiewicz Jr, Peter P
0 siblings, 1 reply; 4+ messages in thread
From: Emil Medve @ 2007-09-11 18:13 UTC (permalink / raw)
To: linux-kernel, netdev, i2c, linux-omap-open-source; +Cc: Emil Medve
Other pr_*() macros are already defined in kernel.h, but pr_err() was defined
multiple times in several other places
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
---
I'm writing a driver and I've been using the pr_*() macros from kernel.h and I
was surprised not to find there pr_err() but defined multiple times (in four
different files). I didn't want to define it yet one more time so I did this
cleanup
This patch is against Linus' tree v2.6.23-rc6 (0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01)
linux-2.6> scripts/checkpatch.pl 0001-Move-the-definition-of-pr_err-into-kernel.h.patch
Your patch has no obvious style problems and is ready for submission.
drivers/i2c/chips/menelaus.c | 10 ++++------
drivers/net/spider_net.h | 3 ---
drivers/video/omap/lcd_h3.c | 6 ++----
drivers/video/omap/lcd_inn1610.c | 6 ++----
include/linux/kernel.h | 2 ++
5 files changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index d9c92c5..66436ba 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,8 +49,6 @@
#define DRIVER_NAME "menelaus"
-#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
-
#define MENELAUS_I2C_ADDRESS 0x72
#define MENELAUS_REV 0x01
@@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
if (val < 0) {
- pr_err("write error");
+ pr_err(DRIVER_NAME ": write error");
return val;
}
@@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
if (val < 0)
- pr_err("read error");
+ pr_err(DRIVER_NAME ": read error");
return val;
}
@@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
- pr_err("device not found");
+ pr_err(DRIVER_NAME ": device not found");
err = -ENODEV;
goto fail1;
}
@@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
res = i2c_add_driver(&menelaus_i2c_driver);
if (res < 0) {
- pr_err("driver registration failed\n");
+ pr_err(DRIVER_NAME ": driver registration failed\n");
return res;
}
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index dbbdb8c..c67b11d 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -493,7 +493,4 @@ struct spider_net_card {
struct spider_net_descr darray[0];
};
-#define pr_err(fmt,arg...) \
- printk(KERN_ERR fmt ,##arg)
-
#endif
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 51807b4..c604d93 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -28,8 +28,6 @@
#define MODULE_NAME "omapfb-lcd_h3"
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
@@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
- pr_err("Unable to turn on LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
return r;
}
@@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
- pr_err("Unable to turn off LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}
static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 95604ca..5ef119c 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -27,20 +27,18 @@
#define MODULE_NAME "omapfb-lcd_h3"
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
int r = 0;
if (omap_request_gpio(14)) {
- pr_err("can't request GPIO 14\n");
+ pr_err(MODULE_NAME ": can't request GPIO 14\n");
r = -1;
goto exit;
}
if (omap_request_gpio(15)) {
- pr_err("can't request GPIO 15\n");
+ pr_err(MODULE_NAME ": can't request GPIO 15\n");
omap_free_gpio(14);
r = -1;
goto exit;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f592df7..c51936a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -242,6 +242,8 @@ static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *
#define pr_info(fmt,arg...) \
printk(KERN_INFO fmt,##arg)
+#define pr_err(fmt, arg...) \
+ printk(KERN_ERR fmt, ##arg)
/*
* Display an IP address in readable format.
--
1.5.3.GIT
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v2] Move the definition of pr_err() into kernel.h
2007-09-11 18:13 [PATCH v2] Move the definition of pr_err() into kernel.h Emil Medve
@ 2007-09-11 19:48 ` Waskiewicz Jr, Peter P
2007-09-11 19:56 ` Medve Emilian-EMMEDVE1
2007-09-11 19:56 ` Felipe Balbi
0 siblings, 2 replies; 4+ messages in thread
From: Waskiewicz Jr, Peter P @ 2007-09-11 19:48 UTC (permalink / raw)
To: Emil Medve, linux-kernel, netdev, i2c, linux-omap-open-source
> Other pr_*() macros are already defined in kernel.h, but
> pr_err() was defined multiple times in several other places
>
> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
> ---
>
> I'm writing a driver and I've been using the pr_*() macros
> from kernel.h and I was surprised not to find there pr_err()
> but defined multiple times (in four different files). I
> didn't want to define it yet one more time so I did this cleanup
>
> This patch is against Linus' tree v2.6.23-rc6
> (0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01)
>
> linux-2.6> scripts/checkpatch.pl
> 0001-Move-the-definition-of-pr_err-into-kernel.h.patch
> Your patch has no obvious style problems and is ready for submission.
Almost. :-)
>
> drivers/i2c/chips/menelaus.c | 10 ++++------
> drivers/net/spider_net.h | 3 ---
> drivers/video/omap/lcd_h3.c | 6 ++----
> drivers/video/omap/lcd_inn1610.c | 6 ++----
> include/linux/kernel.h | 2 ++
> 5 files changed, 10 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/i2c/chips/menelaus.c
> b/drivers/i2c/chips/menelaus.c index d9c92c5..66436ba 100644
> --- a/drivers/i2c/chips/menelaus.c
> +++ b/drivers/i2c/chips/menelaus.c
> @@ -49,8 +49,6 @@
>
> #define DRIVER_NAME "menelaus"
>
> -#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ":
> ", ## arg);
> -
Unnecessary whitespace removal.
> #define MENELAUS_I2C_ADDRESS 0x72
>
> #define MENELAUS_REV 0x01
> @@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
> int val =
> i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
>
> if (val < 0) {
> - pr_err("write error");
> + pr_err(DRIVER_NAME ": write error");
> return val;
> }
>
> @@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
> int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
>
> if (val < 0)
> - pr_err("read error");
> + pr_err(DRIVER_NAME ": read error");
>
> return val;
> }
> @@ -1177,7 +1175,7 @@ static int menelaus_probe(struct
> i2c_client *client)
> /* If a true probe check the device */
> rev = menelaus_read_reg(MENELAUS_REV);
> if (rev < 0) {
> - pr_err("device not found");
> + pr_err(DRIVER_NAME ": device not found");
> err = -ENODEV;
> goto fail1;
> }
> @@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
>
> res = i2c_add_driver(&menelaus_i2c_driver);
> if (res < 0) {
> - pr_err("driver registration failed\n");
> + pr_err(DRIVER_NAME ": driver registration failed\n");
> return res;
> }
>
> diff --git a/drivers/net/spider_net.h
> b/drivers/net/spider_net.h index dbbdb8c..c67b11d 100644
> --- a/drivers/net/spider_net.h
> +++ b/drivers/net/spider_net.h
> @@ -493,7 +493,4 @@ struct spider_net_card {
> struct spider_net_descr darray[0];
> };
>
> -#define pr_err(fmt,arg...) \
> - printk(KERN_ERR fmt ,##arg)
> -
Unnecessary whitespace removal.
> #endif
> diff --git a/drivers/video/omap/lcd_h3.c
> b/drivers/video/omap/lcd_h3.c index 51807b4..c604d93 100644
> --- a/drivers/video/omap/lcd_h3.c
> +++ b/drivers/video/omap/lcd_h3.c
> @@ -28,8 +28,6 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> " fmt, ## args)
> -
Unnecessary whitespace removal.
> static int h3_panel_init(struct lcd_panel *panel, struct
> omapfb_device *fbdev) {
> return 0;
> @@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
> if (!r)
> r = tps65010_set_gpio_out_value(GPIO2, HIGH);
> if (r)
> - pr_err("Unable to turn on LCD panel\n");
> + pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
>
> return r;
> }
> @@ -62,7 +60,7 @@ static void h3_panel_disable(struct
> lcd_panel *panel)
> if (!r)
> tps65010_set_gpio_out_value(GPIO2, LOW);
> if (r)
> - pr_err("Unable to turn off LCD panel\n");
> + pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
> }
>
> static unsigned long h3_panel_get_caps(struct lcd_panel
> *panel) diff --git a/drivers/video/omap/lcd_inn1610.c
> b/drivers/video/omap/lcd_inn1610.c
> index 95604ca..5ef119c 100644
> --- a/drivers/video/omap/lcd_inn1610.c
> +++ b/drivers/video/omap/lcd_inn1610.c
> @@ -27,20 +27,18 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> " fmt, ## args)
> -
Unnecessary whitespace removal.
> static int innovator1610_panel_init(struct lcd_panel *panel,
> struct omapfb_device *fbdev)
> {
> int r = 0;
>
> if (omap_request_gpio(14)) {
> - pr_err("can't request GPIO 14\n");
> + pr_err(MODULE_NAME ": can't request GPIO 14\n");
> r = -1;
> goto exit;
> }
> if (omap_request_gpio(15)) {
> - pr_err("can't request GPIO 15\n");
> + pr_err(MODULE_NAME ": can't request GPIO 15\n");
> omap_free_gpio(14);
> r = -1;
> goto exit;
> diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> index f592df7..c51936a 100644
> --- a/include/linux/kernel.h
> +++ b/include/linux/kernel.h
> @@ -242,6 +242,8 @@ static inline int __attribute__ ((format
> (printf, 1, 2))) pr_debug(const char *
>
> #define pr_info(fmt,arg...) \
> printk(KERN_INFO fmt,##arg)
> +#define pr_err(fmt, arg...) \
> + printk(KERN_ERR fmt, ##arg)
>
> /*
> * Display an IP address in readable format.
> --
> 1.5.3.GIT
Cheers,
-PJ Waskiewicz
Intel Corp.
peter.p.waskiewicz.jr@intel.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v2] Move the definition of pr_err() into kernel.h
2007-09-11 19:48 ` Waskiewicz Jr, Peter P
@ 2007-09-11 19:56 ` Medve Emilian-EMMEDVE1
2007-09-11 19:56 ` Felipe Balbi
1 sibling, 0 replies; 4+ messages in thread
From: Medve Emilian-EMMEDVE1 @ 2007-09-11 19:56 UTC (permalink / raw)
To: linux-kernel, netdev, i2c, linux-omap-open-source
> -----Original Message-----
> From: Waskiewicz Jr, Peter P [mailto:peter.p.waskiewicz.jr@intel.com]
> Sent: Tuesday, September 11, 2007 2:48 PM
> To: Medve Emilian-EMMEDVE1; linux-kernel@vger.kernel.org;
> netdev@vger.kernel.org; i2c@lm-sensors.org;
> linux-omap-open-source@linux.omap.com
> Subject: RE: [PATCH v2] Move the definition of pr_err() into kernel.h
>
> > Other pr_*() macros are already defined in kernel.h, but
> > pr_err() was defined multiple times in several other places
> >
> > Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
> > ---
> >
> > I'm writing a driver and I've been using the pr_*() macros
> > from kernel.h and I was surprised not to find there pr_err()
> > but defined multiple times (in four different files). I
> > didn't want to define it yet one more time so I did this cleanup
> >
> > This patch is against Linus' tree v2.6.23-rc6
> > (0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01)
> >
> > linux-2.6> scripts/checkpatch.pl
> > 0001-Move-the-definition-of-pr_err-into-kernel.h.patch
> > Your patch has no obvious style problems and is ready for
> submission.
>
> Almost. :-)
>
> >
> > drivers/i2c/chips/menelaus.c | 10 ++++------
> > drivers/net/spider_net.h | 3 ---
> > drivers/video/omap/lcd_h3.c | 6 ++----
> > drivers/video/omap/lcd_inn1610.c | 6 ++----
> > include/linux/kernel.h | 2 ++
> > 5 files changed, 10 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/i2c/chips/menelaus.c
> > b/drivers/i2c/chips/menelaus.c index d9c92c5..66436ba 100644
> > --- a/drivers/i2c/chips/menelaus.c
> > +++ b/drivers/i2c/chips/menelaus.c
> > @@ -49,8 +49,6 @@
> >
> > #define DRIVER_NAME "menelaus"
> >
> > -#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ":
> > ", ## arg);
> > -
>
> Unnecessary whitespace removal.
You mean the empty line after the macro definition? If I leave it then
there will be two empty lines in the final file: the one you don't want
me to remove and the one before the macro definition.
>
> > #define MENELAUS_I2C_ADDRESS 0x72
> >
> > #define MENELAUS_REV 0x01
> > @@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
> > int val =
> > i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
> >
> > if (val < 0) {
> > - pr_err("write error");
> > + pr_err(DRIVER_NAME ": write error");
> > return val;
> > }
> >
> > @@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
> > int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
> >
> > if (val < 0)
> > - pr_err("read error");
> > + pr_err(DRIVER_NAME ": read error");
> >
> > return val;
> > }
> > @@ -1177,7 +1175,7 @@ static int menelaus_probe(struct
> > i2c_client *client)
> > /* If a true probe check the device */
> > rev = menelaus_read_reg(MENELAUS_REV);
> > if (rev < 0) {
> > - pr_err("device not found");
> > + pr_err(DRIVER_NAME ": device not found");
> > err = -ENODEV;
> > goto fail1;
> > }
> > @@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
> >
> > res = i2c_add_driver(&menelaus_i2c_driver);
> > if (res < 0) {
> > - pr_err("driver registration failed\n");
> > + pr_err(DRIVER_NAME ": driver registration failed\n");
> > return res;
> > }
> >
> > diff --git a/drivers/net/spider_net.h
> > b/drivers/net/spider_net.h index dbbdb8c..c67b11d 100644
> > --- a/drivers/net/spider_net.h
> > +++ b/drivers/net/spider_net.h
> > @@ -493,7 +493,4 @@ struct spider_net_card {
> > struct spider_net_descr darray[0];
> > };
> >
> > -#define pr_err(fmt,arg...) \
> > - printk(KERN_ERR fmt ,##arg)
> > -
>
> Unnecessary whitespace removal.
>
> > #endif
> > diff --git a/drivers/video/omap/lcd_h3.c
> > b/drivers/video/omap/lcd_h3.c index 51807b4..c604d93 100644
> > --- a/drivers/video/omap/lcd_h3.c
> > +++ b/drivers/video/omap/lcd_h3.c
> > @@ -28,8 +28,6 @@
> >
> > #define MODULE_NAME "omapfb-lcd_h3"
> >
> > -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> > " fmt, ## args)
> > -
>
> Unnecessary whitespace removal.
>
> > static int h3_panel_init(struct lcd_panel *panel, struct
> > omapfb_device *fbdev) {
> > return 0;
> > @@ -48,7 +46,7 @@ static int h3_panel_enable(struct
> lcd_panel *panel)
> > if (!r)
> > r = tps65010_set_gpio_out_value(GPIO2, HIGH);
> > if (r)
> > - pr_err("Unable to turn on LCD panel\n");
> > + pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
> >
> > return r;
> > }
> > @@ -62,7 +60,7 @@ static void h3_panel_disable(struct
> > lcd_panel *panel)
> > if (!r)
> > tps65010_set_gpio_out_value(GPIO2, LOW);
> > if (r)
> > - pr_err("Unable to turn off LCD panel\n");
> > + pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
> > }
> >
> > static unsigned long h3_panel_get_caps(struct lcd_panel
> > *panel) diff --git a/drivers/video/omap/lcd_inn1610.c
> > b/drivers/video/omap/lcd_inn1610.c
> > index 95604ca..5ef119c 100644
> > --- a/drivers/video/omap/lcd_inn1610.c
> > +++ b/drivers/video/omap/lcd_inn1610.c
> > @@ -27,20 +27,18 @@
> >
> > #define MODULE_NAME "omapfb-lcd_h3"
> >
> > -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> > " fmt, ## args)
> > -
>
> Unnecessary whitespace removal.
>
> > static int innovator1610_panel_init(struct lcd_panel *panel,
> > struct omapfb_device *fbdev)
> > {
> > int r = 0;
> >
> > if (omap_request_gpio(14)) {
> > - pr_err("can't request GPIO 14\n");
> > + pr_err(MODULE_NAME ": can't request GPIO 14\n");
> > r = -1;
> > goto exit;
> > }
> > if (omap_request_gpio(15)) {
> > - pr_err("can't request GPIO 15\n");
> > + pr_err(MODULE_NAME ": can't request GPIO 15\n");
> > omap_free_gpio(14);
> > r = -1;
> > goto exit;
> > diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> > index f592df7..c51936a 100644
> > --- a/include/linux/kernel.h
> > +++ b/include/linux/kernel.h
> > @@ -242,6 +242,8 @@ static inline int __attribute__ ((format
> > (printf, 1, 2))) pr_debug(const char *
> >
> > #define pr_info(fmt,arg...) \
> > printk(KERN_INFO fmt,##arg)
> > +#define pr_err(fmt, arg...) \
> > + printk(KERN_ERR fmt, ##arg)
> >
> > /*
> > * Display an IP address in readable format.
> > --
> > 1.5.3.GIT
>
> Cheers,
>
> -PJ Waskiewicz
> Intel Corp.
> peter.p.waskiewicz.jr@intel.com
Thanks,
Emil.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] Move the definition of pr_err() into kernel.h
2007-09-11 19:48 ` Waskiewicz Jr, Peter P
2007-09-11 19:56 ` Medve Emilian-EMMEDVE1
@ 2007-09-11 19:56 ` Felipe Balbi
1 sibling, 0 replies; 4+ messages in thread
From: Felipe Balbi @ 2007-09-11 19:56 UTC (permalink / raw)
To: Waskiewicz Jr, Peter P
Cc: Emil Medve, linux-kernel, netdev, i2c, linux-omap-open-source
Hi,
On 9/11/07, Waskiewicz Jr, Peter P <peter.p.waskiewicz.jr@intel.com> wrote:
<snip>
> > -#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ":
> > ", ## arg);
> > -
>
> Unnecessary whitespace removal.
Actually... I prefer removing the extra blank-line... it's easier to
read and keeps on blank-line only to separate other
defines/code-portion
Same to all the others
<snip><snip><snip><snip><snip>
--
Best Regards,
Felipe Balbi
felipebalbi@users.sourceforge.net
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-09-11 19:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-09-11 18:13 [PATCH v2] Move the definition of pr_err() into kernel.h Emil Medve
2007-09-11 19:48 ` Waskiewicz Jr, Peter P
2007-09-11 19:56 ` Medve Emilian-EMMEDVE1
2007-09-11 19:56 ` Felipe Balbi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®