* [PATCH v4 1/2] rtla: handle SIGTERM during a run
2026-11-21 12:03 [PATCH v4 0/2] rtla: handle SIGTERM and test abnormal exits Chaosheng Qu
@ 2026-11-21 12:03 ` Chaosheng Qu
2026-11-21 12:03 ` [PATCH v4 2/2] rtla/tests: cover cleanup on abnormal exits Chaosheng Qu
1 sibling, 0 replies; 3+ messages in thread
From: Chaosheng Qu @ 2026-11-21 12:03 UTC (permalink / raw)
To: linux-trace-kernel; +Cc: Steven Rostedt, Tomas Glozar, linux-kernel
rtla installs a handler for SIGINT, and for SIGALRM when a duration is
given, but not for SIGTERM. A run stopped by the system - a shutdown or
a service manager - therefore dies without going through the cleanup
path and leaves its tracefs instance behind, so the next invocation
finds the instance name in use.
Install the same handler for SIGTERM, and restore the default
disposition in unset_signals().
Fixes: 2f3172f9dd58 ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Signed-off-by: Chaosheng Qu <chaosheng.qu.linux@gmail.com>
---
tools/tracing/rtla/src/common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/tracing/rtla/src/common.c b/tools/tracing/rtla/src/common.c
index 8c7f5e75b..b86a60076 100644
--- a/tools/tracing/rtla/src/common.c
+++ b/tools/tracing/rtla/src/common.c
@@ -39,6 +39,7 @@ static void stop_trace(int sig)
static void set_signals(struct common_params *params)
{
signal(SIGINT, stop_trace);
+ signal(SIGTERM, stop_trace);
if (params->duration) {
signal(SIGALRM, stop_trace);
alarm(params->duration);
@@ -51,6 +52,7 @@ static void set_signals(struct common_params *params)
static void unset_signals(struct common_params *params)
{
signal(SIGINT, SIG_DFL);
+ signal(SIGTERM, SIG_DFL);
if (params->duration) {
alarm(0);
signal(SIGALRM, SIG_DFL);
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v4 2/2] rtla/tests: cover cleanup on abnormal exits
2026-11-21 12:03 [PATCH v4 0/2] rtla: handle SIGTERM and test abnormal exits Chaosheng Qu
2026-11-21 12:03 ` [PATCH v4 1/2] rtla: handle SIGTERM during a run Chaosheng Qu
@ 2026-11-21 12:03 ` Chaosheng Qu
1 sibling, 0 replies; 3+ messages in thread
From: Chaosheng Qu @ 2026-11-21 12:03 UTC (permalink / raw)
To: linux-trace-kernel; +Cc: Steven Rostedt, Tomas Glozar, linux-kernel
rtla creates a tracefs instance for each run and removes it on the way
out. Nothing verifies that, and a leaked instance only shows up as a
confusing failure of the next run.
Add a test for the paths users actually hit: SIGINT, SIGTERM, rtla's own
-d timer, a failing --on-threshold action, and several interrupted runs
followed by a normal one. These need rtla running in the background
while the test signals it, which engine.sh's check() cannot express, so
cleanup.t drives a helper script and emits TAP itself.
The instance directory is created before set_signals() runs, so the
helper waits until /proc/<pid>/status reports SIGTERM in SigCgt before it
signals; waiting for the directory alone races startup.
The test needs root, tracefs and CONFIG_OSNOISE_TRACER, and skips when
tracefs is not writable.
Signed-off-by: Chaosheng Qu <chaosheng.qu.linux@gmail.com>
---
tools/tracing/rtla/tests/cleanup.t | 70 ++++++
.../rtla/tests/scripts/check-cleanup.sh | 219 ++++++++++++++++++
2 files changed, 289 insertions(+)
create mode 100644 tools/tracing/rtla/tests/cleanup.t
create mode 100755 tools/tracing/rtla/tests/scripts/check-cleanup.sh
diff --git a/tools/tracing/rtla/tests/cleanup.t b/tools/tracing/rtla/tests/cleanup.t
new file mode 100644
index 000000000..176b1a96f
--- /dev/null
+++ b/tools/tracing/rtla/tests/cleanup.t
@@ -0,0 +1,70 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Verify that rtla removes the tracefs instance it created on the abnormal
+# exit paths users actually hit:
+#
+# - SIGINT during a run (interactive Ctrl-C)
+# - SIGTERM during a run
+# - rtla's own -d/--duration timer
+# - a failing --on-threshold shell action
+# - several interrupted runs in a row, followed by a normal run
+#
+# A leaked instance pollutes the next invocation.
+source tests/engine.sh
+test_begin
+
+set_timeout 2m
+
+#
+# These cases need to run rtla in the background and signal it, which
+# engine.sh's check() (one foreground command) cannot express.
+#
+run_cleanup_cases() {
+ local helper="$testdir/scripts/check-cleanup.sh"
+ local out rc timeout_cmd skip
+
+ ctr=$((ctr + 1))
+ [ -z "$TEST_COUNT" ] && return
+
+ if [ ! -x "$helper" ]; then
+ echo "not ok $ctr - cleanup helper is not executable"
+ return
+ fi
+
+ # check() normally does this before every test. Do the same here, both to
+ # leave a clean tracer state and to make a hung helper terminate.
+ reset_osnoise || {
+ echo "ok $ctr - instances cleaned up on SIGINT, timeout and action failure # SKIP tracefs is not writable"
+ return
+ }
+ timeout_cmd=${TIMEOUT:-timeout -v -k 15s 2m}
+
+ out=$($timeout_cmd "$helper" "$RTLA" 2>&1)
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ # "SKIP:" is what the helper prints when it could not run at all
+ # (no writable tracefs, or the binary is unusable); a per-case skip
+ # says "note:" instead. So the first SKIP: line means nothing ran.
+ skip=$(printf '%s\n' "$out" | sed -n 's/^SKIP: //p' | head -n 1)
+ if [ -n "$skip" ]; then
+ echo "ok $ctr - instances cleaned up on SIGINT, timeout and action failure # SKIP $skip"
+ return
+ fi
+ printf '%s\n' "$out" | sed -n 's/^note: /# note: /p'
+ echo "ok $ctr - instances cleaned up on SIGINT, timeout and action failure"
+ elif [ $rc -eq 124 ] || [ $rc -eq 137 ]; then
+ echo "not ok $ctr - instances cleaned up on SIGINT, timeout and action failure"
+ echo "# helper timed out after 2m"
+ else
+ echo "not ok $ctr - instances cleaned up on SIGINT, timeout and action failure"
+ echo "# helper exited $rc"
+ printf '%s\n' "$out" | while read -r line; do
+ echo "# $line"
+ done
+ fi
+}
+
+run_cleanup_cases
+
+test_end
diff --git a/tools/tracing/rtla/tests/scripts/check-cleanup.sh b/tools/tracing/rtla/tests/scripts/check-cleanup.sh
new file mode 100755
index 000000000..7bd5b1233
--- /dev/null
+++ b/tools/tracing/rtla/tests/scripts/check-cleanup.sh
@@ -0,0 +1,219 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Verify that rtla removes the tracefs instances it created, even when it is
+# interrupted (SIGINT/SIGTERM), killed by its own timeout, or when a shell
+# action fails.
+#
+# This is a *test* for tools/tracing/rtla; it does not change rtla behaviour.
+#
+# Requires: root, tracefs mounted at /sys/kernel/tracing, CONFIG_OSNOISE_TRACER.
+# Usage: rtla_cleanup_test.sh /path/to/rtla
+
+RTLA=${1:-rtla}
+TRACEFS=${TRACEFS:-/sys/kernel/tracing}
+INSTANCES=$TRACEFS/instances
+FAIL=0
+PASS=0
+
+log() { printf '%s\n' "$*"; }
+pass() { PASS=$((PASS+1)); log "PASS: $*"; }
+fail() { FAIL=$((FAIL+1)); log "FAIL: $*"; }
+cleanup_all() {
+ for i in osnoise_top osnoise_hist timerlat_top timerlat_hist hwnoise_top; do
+ [ -d "$INSTANCES/$i" ] && rmdir "$INSTANCES/$i" 2>/dev/null
+ done
+}
+
+# Wait up to $2 ms for $1 to disappear.
+wait_gone() {
+ _path=$1
+ _ms=${2:-5000}
+ _i=0
+ while [ -d "$_path" ] && [ $_i -lt $_ms ]; do
+ sleep 0.05
+ _i=$((_i+50))
+ done
+ [ ! -d "$_path" ]
+}
+
+# Wait until $1 exists (up to $2 ms).
+wait_present() {
+ _path=$1
+ _ms=${2:-10000}
+ _i=0
+ while [ ! -d "$_path" ] && [ $_i -lt $_ms ]; do
+ sleep 0.05
+ _i=$((_i+50))
+ done
+ [ -d "$_path" ]
+}
+
+if [ ! -d "$INSTANCES" ] || [ ! -w "$INSTANCES" ] ||
+ [ ! -d "$TRACEFS/osnoise" ]; then
+ log "SKIP: tracefs, writable instances or CONFIG_OSNOISE_TRACER unavailable"
+ exit 0
+fi
+
+# Leave nothing behind from the test before it starts, and make sure the
+# command under test is actually usable.
+#
+# rtla has no --version: main() only knows -h/--help and -usage, and anything
+# else falls through to rtla_usage(), which exits 129 after printing the
+# version banner. Probing --version therefore always failed and the whole test
+# suite silently reported SKIP. Accept 129 as "this binary works".
+cleanup_all
+if [ ! -x "$RTLA" ]; then
+ log "SKIP: $RTLA is not executable"
+ exit 0
+fi
+help_out=$("$RTLA" --help 2>&1)
+rtla_rc=$?
+if [ "$rtla_rc" -ne 129 ] ||
+ ! printf '%s\n' "$help_out" | grep -q 'rtla version'; then
+ log "SKIP: $RTLA is not usable (--help exited $rtla_rc, no version banner)"
+ exit 0
+fi
+
+# Kill a background rtla if a case fails before reaping it.
+stop_pid() {
+ [ -n "$1" ] || return
+ kill -KILL "$1" 2>/dev/null
+ wait "$1" 2>/dev/null
+}
+
+# Wait until rtla has installed its SIGTERM handler. The instance directory
+# appears before set_signals() runs, so signalling as soon as the directory
+# exists races startup; the signal disposition is visible in /proc.
+wait_running() {
+ _path=$1
+ _pid=$2
+
+ wait_present "$_path" 10000 || return 1
+ _i=0
+ while [ "$_i" -lt 200 ]; do
+ _cgt=$(sed -n 's/^SigCgt:[[:space:]]*//p' "/proc/$_pid/status" 2>/dev/null)
+ [ -n "$_cgt" ] && [ $((0x$_cgt & 0x4000)) -ne 0 ] && return 0
+ kill -0 "$_pid" 2>/dev/null || return 1
+ sleep 0.05
+ _i=$((_i + 1))
+ done
+ return 1
+}
+
+# ---------------------------------------------------------------------------
+# 1. SIGINT during a long run
+# ---------------------------------------------------------------------------
+cleanup_all
+$RTLA osnoise top -q -d 30s -P F:1 >/dev/null 2>&1 &
+pid=$!
+if ! wait_running "$INSTANCES/osnoise_top" "$pid"; then
+ fail "SIGINT: instance was never created (rtla did not start?)"
+ stop_pid "$pid"
+else
+ kill -INT "$pid" 2>/dev/null
+ wait "$pid" 2>/dev/null
+ if wait_gone "$INSTANCES/osnoise_top"; then
+ pass "SIGINT: instance removed after interrupt"
+ else
+ fail "SIGINT: instance still present after interrupt"
+ fi
+fi
+
+# ---------------------------------------------------------------------------
+# 2. SIGTERM during a long run
+# ---------------------------------------------------------------------------
+cleanup_all
+$RTLA osnoise top -q -d 30s -P F:1 >/dev/null 2>&1 &
+pid=$!
+if ! wait_running "$INSTANCES/osnoise_top" "$pid"; then
+ fail "SIGTERM: instance was never created (rtla did not start)"
+ stop_pid "$pid"
+else
+ kill -TERM "$pid" 2>/dev/null
+ wait "$pid" 2>/dev/null
+ if wait_gone "$INSTANCES/osnoise_top"; then
+ pass "SIGTERM: instance removed after terminate"
+ else
+ fail "SIGTERM: instance still present after terminate"
+ fi
+fi
+
+# ---------------------------------------------------------------------------
+# 3. rtla's own -d timeout path
+# ---------------------------------------------------------------------------
+cleanup_all
+$RTLA osnoise top -q -d 2s -P F:1 >/dev/null 2>&1
+rc=$?
+if [ "$rc" -ne 0 ]; then
+ fail "self-timeout: rtla failed to start or run (exit=$rc)"
+elif wait_gone "$INSTANCES/osnoise_top"; then
+ pass "self-timeout: instance removed (exit=$rc)"
+else
+ fail "self-timeout: instance still present (exit=$rc)"
+fi
+
+# ---------------------------------------------------------------------------
+# 4. shell action failure (-a / --on-threshold shell,command=...)
+# ---------------------------------------------------------------------------
+# -S is the stop-total threshold and yields exit 2 when the action fails.
+# A shell action only runs if that threshold is crossed; an idle machine may
+# never do so. Do not call the no-threshold case a pass.
+cleanup_all
+action_rc=0
+for n in 1 2 3; do
+ $RTLA osnoise top -q -d 5s -P F:1 -r 900000 -S 1 \
+ --on-threshold 'shell,command="/bin/false"' >/dev/null 2>&1
+ rc=$?
+ action_rc=$rc
+ [ "$rc" -eq 2 ] && break
+done
+if [ "$action_rc" -eq 0 ]; then
+ # Not a group-level skip: the other cases still ran. Prefix it so the
+ # TAP wrapper does not report the whole test as skipped.
+ log "note: action-failure: stop-total threshold was not crossed"
+elif [ "$action_rc" -ne 2 ]; then
+ fail "action-failure: unexpected exit=$action_rc (wanted 2)"
+elif wait_gone "$INSTANCES/osnoise_top"; then
+ pass "action-failure: instance removed (exit=$action_rc)"
+else
+ fail "action-failure: instance still present (exit=$action_rc)"
+fi
+
+# ---------------------------------------------------------------------------
+# 5. repeated interrupted runs must not poison the next run
+# ---------------------------------------------------------------------------
+cleanup_all
+for n in 1 2 3; do
+ $RTLA osnoise top -q -d 20s -P F:1 >/dev/null 2>&1 &
+ pid=$!
+ if ! wait_running "$INSTANCES/osnoise_top" "$pid"; then
+ fail "repeated interrupts: run $n never created an instance"
+ stop_pid "$pid"
+ continue
+ fi
+ kill -INT "$pid" 2>/dev/null
+ wait "$pid" 2>/dev/null
+ if ! wait_gone "$INSTANCES/osnoise_top"; then
+ fail "repeated interrupts: run $n left an instance behind"
+ cleanup_all
+ fi
+done
+
+$RTLA osnoise top -q -d 2s -P F:1 >/dev/null 2>&1
+rc=$?
+if [ "$rc" -eq 0 ]; then
+ pass "repeated interrupts: following run still succeeds"
+else
+ fail "repeated interrupts: following run failed (exit=$rc)"
+fi
+if wait_gone "$INSTANCES/osnoise_top"; then
+ pass "repeated interrupts: no leftover instance"
+else
+ fail "repeated interrupts: leftover instance"
+fi
+
+cleanup_all
+log ""
+log "SUMMARY: $PASS passed, $FAIL failed"
+[ "$FAIL" -eq 0 ]
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread