mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Amna Waseem <Amna.Waseem@axis.com>,
	Jean Delvare <jdelvare@suse.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@axis.com
Subject: Re: [PATCH v3 2/2] hwmon: (ina2xx) Add device tree support to pass alert polarity
Date: Mon, 10 Jun 2024 09:29:13 -0700	[thread overview]
Message-ID: <33f421f0-f52a-4bf5-9efe-727ea5701cd1@roeck-us.net> (raw)
In-Reply-To: <20240603-apol-ina2xx-fix-v3-2-b9eff3158e4e@axis.com>

On 6/3/24 03:08, Amna Waseem wrote:
> The INA230 has an Alert pin which is asserted when the alert
> function selected in the Mask/Enable register exceeds the
> value programmed into the Alert Limit register. Assertion is based
> on the Alert Polarity Bit (APOL, bit 1 of the Mask/Enable register).
> It is default set to value 0 i.e Normal (active-low open collector).
> However, hardware can be designed in such a way that expects Alert pin
> to become active high if a user-defined threshold in Alert limit
> register has been exceeded. This patch adds a way to pass alert polarity
> value to the driver via device tree.
> 
> Signed-off-by: Amna Waseem <Amna.Waseem@axis.com>
> ---
>   drivers/hwmon/ina2xx.c | 35 +++++++++++++++++++++++++++++++++++
>   1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
> index d8415d1f21fc..101346d26c88 100644
> --- a/drivers/hwmon/ina2xx.c
> +++ b/drivers/hwmon/ina2xx.c
> @@ -73,6 +73,11 @@
>   #define INA226_READ_AVG(reg)		(((reg) & INA226_AVG_RD_MASK) >> 9)
>   #define INA226_SHIFT_AVG(val)		((val) << 9)
>   
> +#define INA226_ALERT_POLARITY_MASK		0x0002
> +#define INA226_SHIFT_ALERT_POLARITY(val)	((val) << 1)
> +#define INA226_ALERT_POL_LOW			0
> +#define INA226_ALERT_POL_HIGH			1
> +
>   /* bit number of alert functions in Mask/Enable Register */
>   #define INA226_SHUNT_OVER_VOLTAGE_BIT	15
>   #define INA226_SHUNT_UNDER_VOLTAGE_BIT	14
> @@ -178,6 +183,17 @@ static u16 ina226_interval_to_reg(int interval)
>   	return INA226_SHIFT_AVG(avg_bits);
>   }
>   
> +static int ina2xx_set_alert_polarity(struct ina2xx_data *data,
> +				     unsigned long val)
> +{
> +	if (!(val == 0 || val == 1))
> +		return -EINVAL;
> +

The above check is completely unnecessary. This is a static function,
and the parameters are known to be either INA226_ALERT_POL_LOW or
INA226_ALERT_POL_HIGH.

Guenter


      reply	other threads:[~2024-06-10 16:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-03 10:08 [PATCH v3 0/2] hwmon: (ina2xx):Add Suppor for passing alert polarity from device tree to driver Amna Waseem
2024-06-03 10:08 ` [PATCH v3 1/2] dt-bindings: hwmon: ti,ina2xx: Add ti,alert-polarity-active-high property Amna Waseem
2024-06-05 23:31   ` Rob Herring (Arm)
2024-06-12 14:14   ` Guenter Roeck
2024-06-03 10:08 ` [PATCH v3 2/2] hwmon: (ina2xx) Add device tree support to pass alert polarity Amna Waseem
2024-06-10 16:29   ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=33f421f0-f52a-4bf5-9efe-727ea5701cd1@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=Amna.Waseem@axis.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=kernel@axis.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®