[PATCH net-next v7 0/3] Ethernet DWMAC5 fault IRQ support

[PATCH net-next v7 0/3] Ethernet DWMAC5 fault IRQ support

[Suraj Jaiswal]

Add support to listen Ethernet HW common safery IRQ for correctable and 
uncorrectable fault. The safety IRQ will be triggered for ECC(error
correction code), DPP(data path parity, FSM(finite state machine) error.

Changes since v7:
- Add support of common sfty irq on stmmac_request_irq_multi_msi.
- Remove uncecessary blank line.

Changes since v6:
- use name sfty_irq instead of safety_common_irq.

Changes since v5:
- Add description of ECC, DPP, FSM

Changes since v4:
- Fix DT_CHECKER warning
- use name safety for the IRQ.

Suraj Jaiswal (3):
  dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for
    sa8775p
  arm64: dts: qcom: sa8775p: enable safety IRQ
  net: stmmac: Add driver support for DWMAC5 common safety IRQ

 .../devicetree/bindings/net/qcom,ethqos.yaml  |  9 +++--
 .../devicetree/bindings/net/snps,dwmac.yaml   |  6 ++--
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 10 +++---
 drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  2 ++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 +++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  8 +++++
 7 files changed, 62 insertions(+), 9 deletions(-)

-- 
2.25.1

[PATCH net-next v7 1/3] dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p

[Suraj Jaiswal]

Add binding doc for safety IRQ. The safety IRQ will be
triggered for ECC(error correction code), DPP(data path
parity), FSM(finite state machine) error.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 9 ++++++---
 Documentation/devicetree/bindings/net/snps,dwmac.yaml  | 6 ++++--
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 7bdb412a0185..69a337c7e345 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@ properties:
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_lpi
+      - enum: [eth_lpi, sfty]
+      - const: sfty
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@ examples:
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "sfty";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 5c2769dc689a..9b04e2ed7c18 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -107,13 +107,15 @@ properties:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - enum: [eth_wake_irq, eth_lpi]
-      - const: eth_lpi
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
 
   clocks:
     minItems: 1
-- 
2.25.1

[PATCH net-next v7 2/3] arm64: dts: qcom: sa8775p: enable safety IRQ

[Suraj Jaiswal]

Add changes to support safety IRQ handling
support for ethernet.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index a7eaca33d326..f3645c3f96a1 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2394,8 +2394,9 @@ ethernet1: ethernet@23000000 {
 			      <0x0 0x23016000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
 				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
@@ -2427,8 +2428,9 @@ ethernet0: ethernet@23040000 {
 			      <0x0 0x23056000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
 				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
-- 
2.25.1

[PATCH net-next v7 3/3] net: stmmac: Add driver support for DWMAC5 common safety IRQ

[Suraj Jaiswal]

Add support to listen HW safety IRQ like ECC(error
correction code), DPP(data path parity), FSM(finite state
machine) fault in common IRQ line.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  2 ++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 +++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  8 +++++
 4 files changed, 46 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 721c1f8e892f..b9233b09b80f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -344,6 +344,7 @@ enum request_irq_err {
 	REQ_IRQ_ERR_ALL,
 	REQ_IRQ_ERR_TX,
 	REQ_IRQ_ERR_RX,
+	REQ_IRQ_ERR_SFTY,
 	REQ_IRQ_ERR_SFTY_UE,
 	REQ_IRQ_ERR_SFTY_CE,
 	REQ_IRQ_ERR_LPI,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9f89acf31050..9aeaca01cace 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -31,6 +31,7 @@ struct stmmac_resources {
 	int wol_irq;
 	int lpi_irq;
 	int irq;
+	int sfty_irq;
 	int sfty_ce_irq;
 	int sfty_ue_irq;
 	int rx_irq[MTL_MAX_RX_QUEUES];
@@ -297,6 +298,7 @@ struct stmmac_priv {
 	void __iomem *ptpaddr;
 	void __iomem *estaddr;
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	int sfty_irq;
 	int sfty_ce_irq;
 	int sfty_ue_irq;
 	int rx_irq[MTL_MAX_RX_QUEUES];
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 47de466e432c..f6639ffb017e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
 		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
 			free_irq(priv->wol_irq, dev);
 		fallthrough;
+	case REQ_IRQ_ERR_SFTY:
+		if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
+			free_irq(priv->sfty_irq, dev);
+		fallthrough;
 	case REQ_IRQ_ERR_WOL:
 		free_irq(dev->irq, dev);
 		fallthrough;
@@ -3661,6 +3665,21 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
 		}
 	}
 
+	/* Request the common Safety Feature Correctible/Uncorrectible
+	 * Error line in case of another line is used
+	 */
+	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
+		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
+				  0, dev->name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc safety failed %d (error: %d)\n",
+				   __func__, priv->sfty_irq, ret);
+			irq_err = REQ_IRQ_ERR_SFTY;
+			goto irq_error;
+		}
+	}
+
 	/* Request the Safety Feature Correctible Error line in
 	 * case of another line is used
 	 */
@@ -3798,6 +3817,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
 		}
 	}
 
+	/* Request the common Safety Feature Correctible/Uncorrectible
+	 * Error line in case of another line is used
+	 */
+	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
+		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
+				  0, dev->name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc safety failed %d (error: %d)\n",
+				   __func__, priv->sfty_irq, ret);
+			irq_err = REQ_IRQ_ERR_SFTY;
+			goto irq_error;
+		}
+	}
+
 	return 0;
 
 irq_error:
@@ -7462,6 +7496,7 @@ int stmmac_dvr_probe(struct device *device,
 	priv->dev->irq = res->irq;
 	priv->wol_irq = res->wol_irq;
 	priv->lpi_irq = res->lpi_irq;
+	priv->sfty_irq = res->sfty_irq;
 	priv->sfty_ce_irq = res->sfty_ce_irq;
 	priv->sfty_ue_irq = res->sfty_ue_irq;
 	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 70eadc83ca68..ab250161fd79 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
 		dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
 	}
 
+	stmmac_res->sfty_irq =
+		platform_get_irq_byname_optional(pdev, "sfty");
+	if (stmmac_res->sfty_irq < 0) {
+		if (stmmac_res->sfty_irq == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
+	}
+
 	stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
 
 	return PTR_ERR_OR_ZERO(stmmac_res->addr);
-- 
2.25.1

Re: [PATCH net-next v7 3/3] net: stmmac: Add driver support for DWMAC5 common safety IRQ

[Serge Semin]

[-- Attachment #1: Type: text/plain, Size: 5511 bytes --]

Hi Suraj

On Tue, Dec 19, 2023 at 04:18:15PM +0530, Suraj Jaiswal wrote:
> Add support to listen HW safety IRQ like ECC(error
> correction code), DPP(data path parity), FSM(finite state
> machine) fault in common IRQ line.
> 
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
>  drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  2 ++
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 +++++++++++++++++++
>  .../ethernet/stmicro/stmmac/stmmac_platform.c |  8 +++++
>  4 files changed, 46 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> index 721c1f8e892f..b9233b09b80f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> @@ -344,6 +344,7 @@ enum request_irq_err {
>  	REQ_IRQ_ERR_ALL,
>  	REQ_IRQ_ERR_TX,
>  	REQ_IRQ_ERR_RX,
> +	REQ_IRQ_ERR_SFTY,
>  	REQ_IRQ_ERR_SFTY_UE,
>  	REQ_IRQ_ERR_SFTY_CE,
>  	REQ_IRQ_ERR_LPI,
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index 9f89acf31050..9aeaca01cace 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -31,6 +31,7 @@ struct stmmac_resources {
>  	int wol_irq;
>  	int lpi_irq;
>  	int irq;
> +	int sfty_irq;
>  	int sfty_ce_irq;
>  	int sfty_ue_irq;
>  	int rx_irq[MTL_MAX_RX_QUEUES];
> @@ -297,6 +298,7 @@ struct stmmac_priv {
>  	void __iomem *ptpaddr;
>  	void __iomem *estaddr;
>  	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
> +	int sfty_irq;
>  	int sfty_ce_irq;
>  	int sfty_ue_irq;
>  	int rx_irq[MTL_MAX_RX_QUEUES];
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 47de466e432c..f6639ffb017e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
>  		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
>  			free_irq(priv->wol_irq, dev);
>  		fallthrough;
> +	case REQ_IRQ_ERR_SFTY:
> +		if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
> +			free_irq(priv->sfty_irq, dev);
> +		fallthrough;
>  	case REQ_IRQ_ERR_WOL:
>  		free_irq(dev->irq, dev);
>  		fallthrough;
> @@ -3661,6 +3665,21 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
>  		}
>  	}
>  
> +	/* Request the common Safety Feature Correctible/Uncorrectible
> +	 * Error line in case of another line is used
> +	 */

> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> +				  0, dev->name, dev);

Not entirely what I asked. What I asked was to make the code unified in
the respective IRQ-request methods. You just copy-and-pasted the same
code snippet in both functions. To see what I meant please find the
diff attached to this message. It's applicable on top of this patch.

> +		if (unlikely(ret < 0)) {
> +			netdev_err(priv->dev,

> +				   "%s: alloc safety failed %d (error: %d)\n",
> +				   __func__, priv->sfty_irq, ret);

This looks different than the rest of the error messages in this
method (see the attached diff).

> +			irq_err = REQ_IRQ_ERR_SFTY;
> +			goto irq_error;
> +		}
> +	}
> +
>  	/* Request the Safety Feature Correctible Error line in
>  	 * case of another line is used
>  	 */
> @@ -3798,6 +3817,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
>  		}
>  	}
>  
> +	/* Request the common Safety Feature Correctible/Uncorrectible
> +	 * Error line in case of another line is used
> +	 */
> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {

> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> +				  0, dev->name, dev);

IRQF_SHARED?

> +		if (unlikely(ret < 0)) {

> +			netdev_err(priv->dev,
> +				   "%s: alloc safety failed %d (error: %d)\n",
> +				   __func__, priv->sfty_irq, ret);

This also looks different than the rest of the error messages in this 
method (see the attached diff).

Some other comments I'll send to v8 after all the above finally fixed.

-Serge(y)

> +			irq_err = REQ_IRQ_ERR_SFTY;
> +			goto irq_error;
> +		}
> +	}
> +
>  	return 0;
>  
>  irq_error:
> @@ -7462,6 +7496,7 @@ int stmmac_dvr_probe(struct device *device,
>  	priv->dev->irq = res->irq;
>  	priv->wol_irq = res->wol_irq;
>  	priv->lpi_irq = res->lpi_irq;
> +	priv->sfty_irq = res->sfty_irq;
>  	priv->sfty_ce_irq = res->sfty_ce_irq;
>  	priv->sfty_ue_irq = res->sfty_ue_irq;
>  	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 70eadc83ca68..ab250161fd79 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
>  		dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
>  	}
>  
> +	stmmac_res->sfty_irq =
> +		platform_get_irq_byname_optional(pdev, "sfty");
> +	if (stmmac_res->sfty_irq < 0) {
> +		if (stmmac_res->sfty_irq == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
> +	}
> +
>  	stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
>  
>  	return PTR_ERR_OR_ZERO(stmmac_res->addr);
> -- 
> 2.25.1
> 
> 

[-- Attachment #2: common_sfty_irq.diff --]
[-- Type: text/x-patch, Size: 2011 bytes --]

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index f9d80fc00cb8..2bb3f1adbb61 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -329,6 +329,7 @@ struct stmmac_priv {
 	char int_name_mac[IFNAMSIZ + 9];
 	char int_name_wol[IFNAMSIZ + 9];
 	char int_name_lpi[IFNAMSIZ + 9];
+	char int_name_sfty[IFNAMSIZ + 10];
 	char int_name_sfty_ce[IFNAMSIZ + 10];
 	char int_name_sfty_ue[IFNAMSIZ + 10];
 	char int_name_rx_irq[MTL_MAX_TX_QUEUES][IFNAMSIZ + 14];
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e49b1306b338..93439a14378f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3539,11 +3539,13 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
 	 * Error line in case of another line is used
 	 */
 	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
+		int_name = priv->int_name_sfty;
+		sprintf(int_name, "%s:%s", dev->name, "safety");
 		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
-				  0, dev->name, dev);
+				  0, int_name, dev);
 		if (unlikely(ret < 0)) {
 			netdev_err(priv->dev,
-				   "%s: alloc safety failed %d (error: %d)\n",
+				   "%s: alloc sfty MSI %d (error: %d)\n",
 				   __func__, priv->sfty_irq, ret);
 			irq_err = REQ_IRQ_ERR_SFTY;
 			goto irq_error;
@@ -3692,10 +3694,10 @@ static int stmmac_request_irq_single(struct net_device *dev)
 	 */
 	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
 		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
-				  0, dev->name, dev);
+				  IRQF_SHARED, dev->name, dev);
 		if (unlikely(ret < 0)) {
 			netdev_err(priv->dev,
-				   "%s: alloc safety failed %d (error: %d)\n",
+				   "%s: ERROR: allocating the sfty IRQ %d (%d)\n",
 				   __func__, priv->sfty_irq, ret);
 			irq_err = REQ_IRQ_ERR_SFTY;
 			goto irq_error;

Re: [PATCH net-next v7 3/3] net: stmmac: Add driver support for DWMAC5 common safety IRQ

[Suraj Jaiswal]

hi Serge,
taken care of comments please review.

Thanks
Suraj

On 12/20/2023 8:20 PM, Serge Semin wrote:
> Hi Suraj
> 
> On Tue, Dec 19, 2023 at 04:18:15PM +0530, Suraj Jaiswal wrote:
>> Add support to listen HW safety IRQ like ECC(error
>> correction code), DPP(data path parity), FSM(finite state
>> machine) fault in common IRQ line.
>>
>> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
>> ---
>>  drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
>>  drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  2 ++
>>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 +++++++++++++++++++
>>  .../ethernet/stmicro/stmmac/stmmac_platform.c |  8 +++++
>>  4 files changed, 46 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
>> index 721c1f8e892f..b9233b09b80f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>> @@ -344,6 +344,7 @@ enum request_irq_err {
>>  	REQ_IRQ_ERR_ALL,
>>  	REQ_IRQ_ERR_TX,
>>  	REQ_IRQ_ERR_RX,
>> +	REQ_IRQ_ERR_SFTY,
>>  	REQ_IRQ_ERR_SFTY_UE,
>>  	REQ_IRQ_ERR_SFTY_CE,
>>  	REQ_IRQ_ERR_LPI,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> index 9f89acf31050..9aeaca01cace 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> @@ -31,6 +31,7 @@ struct stmmac_resources {
>>  	int wol_irq;
>>  	int lpi_irq;
>>  	int irq;
>> +	int sfty_irq;
>>  	int sfty_ce_irq;
>>  	int sfty_ue_irq;
>>  	int rx_irq[MTL_MAX_RX_QUEUES];
>> @@ -297,6 +298,7 @@ struct stmmac_priv {
>>  	void __iomem *ptpaddr;
>>  	void __iomem *estaddr;
>>  	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
>> +	int sfty_irq;
>>  	int sfty_ce_irq;
>>  	int sfty_ue_irq;
>>  	int rx_irq[MTL_MAX_RX_QUEUES];
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 47de466e432c..f6639ffb017e 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
>>  		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
>>  			free_irq(priv->wol_irq, dev);
>>  		fallthrough;
>> +	case REQ_IRQ_ERR_SFTY:
>> +		if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
>> +			free_irq(priv->sfty_irq, dev);
>> +		fallthrough;
>>  	case REQ_IRQ_ERR_WOL:
>>  		free_irq(dev->irq, dev);
>>  		fallthrough;
>> @@ -3661,6 +3665,21 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
>>  		}
>>  	}
>>  
>> +	/* Request the common Safety Feature Correctible/Uncorrectible
>> +	 * Error line in case of another line is used
>> +	 */
> 
>> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
>> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
>> +				  0, dev->name, dev);
> 
> Not entirely what I asked. What I asked was to make the code unified in
> the respective IRQ-request methods. You just copy-and-pasted the same
> code snippet in both functions. To see what I meant please find the
> diff attached to this message. It's applicable on top of this patch.
> 
>> +		if (unlikely(ret < 0)) {
>> +			netdev_err(priv->dev,
> 
>> +				   "%s: alloc safety failed %d (error: %d)\n",
>> +				   __func__, priv->sfty_irq, ret);
> 
> This looks different than the rest of the error messages in this
> method (see the attached diff).
> 
>> +			irq_err = REQ_IRQ_ERR_SFTY;
>> +			goto irq_error;
>> +		}
>> +	}
>> +
>>  	/* Request the Safety Feature Correctible Error line in
>>  	 * case of another line is used
>>  	 */
>> @@ -3798,6 +3817,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
>>  		}
>>  	}
>>  
>> +	/* Request the common Safety Feature Correctible/Uncorrectible
>> +	 * Error line in case of another line is used
>> +	 */
>> +	if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> 
>> +		ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
>> +				  0, dev->name, dev);
> 
> IRQF_SHARED?
> 
>> +		if (unlikely(ret < 0)) {
> 
>> +			netdev_err(priv->dev,
>> +				   "%s: alloc safety failed %d (error: %d)\n",
>> +				   __func__, priv->sfty_irq, ret);
> 
> This also looks different than the rest of the error messages in this 
> method (see the attached diff).
> 
> Some other comments I'll send to v8 after all the above finally fixed.
> 
> -Serge(y)
> 
>> +			irq_err = REQ_IRQ_ERR_SFTY;
>> +			goto irq_error;
>> +		}
>> +	}
>> +
>>  	return 0;
>>  
>>  irq_error:
>> @@ -7462,6 +7496,7 @@ int stmmac_dvr_probe(struct device *device,
>>  	priv->dev->irq = res->irq;
>>  	priv->wol_irq = res->wol_irq;
>>  	priv->lpi_irq = res->lpi_irq;
>> +	priv->sfty_irq = res->sfty_irq;
>>  	priv->sfty_ce_irq = res->sfty_ce_irq;
>>  	priv->sfty_ue_irq = res->sfty_ue_irq;
>>  	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index 70eadc83ca68..ab250161fd79 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
>>  		dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
>>  	}
>>  
>> +	stmmac_res->sfty_irq =
>> +		platform_get_irq_byname_optional(pdev, "sfty");
>> +	if (stmmac_res->sfty_irq < 0) {
>> +		if (stmmac_res->sfty_irq == -EPROBE_DEFER)
>> +			return -EPROBE_DEFER;
>> +		dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
>> +	}
>> +
>>  	stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
>>  
>>  	return PTR_ERR_OR_ZERO(stmmac_res->addr);
>> -- 
>> 2.25.1
>>
>>