Re: [PATCH v3 2/2] ARM: dts: aspeed: Add NVIDIA VR-NVL BMC

[Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>]

On 22/07/2026 09:45, Andrew Jeffery wrote:
> Hi Jacky,
> 
> On Fri, 2026-07-10 at 14:46 +0900, Jacky Huang wrote:
>> Add the device tree for the Aspeed AST2600 BMC for NVIDIA's Vera
>> Rubin NVL compute platform.
>>
>> MAC0 uses phy-mode = "rgmii-id" because the on-board PHY supplies
>> both RGMII internal delays.  The matching U-Boot device tree does not
>> enable SoC-side MAC clock delays, leaving the MAC internal delay at
>> zero so the PHY-provided delay is not doubled by the MAC controller.
>>
>> The corresponding U-Boot change has been submitted to openbmc/u-boot:
>> Link: https://lore.kernel.org/all/20260629105202.1417679-1-jackyhuang@nvidia.com/
>>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
>> ---
>> v3: reword the &mac0 comment per Andrew Lunn's feedback.
>>
>>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>>  .../aspeed/aspeed-bmc-nvidia-vr-nvl-bmc.dts   | 901 ++++++++++++++++++
>>  2 files changed, 902 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-vr-nvl-bmc.dts
> 
> We now have scripts/dtc/dt-check-style, and going forward I'm asking
> that all new devicetree submissions pass in strict mode.

Thanks!

> 
> Currently:
> 
>    $ ../scripts/dtc/dt-check-style --mode strict ../arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-vr-nvl-bmc.dts 2>&1 | wc -l
>    152
> 
> Can you please address those?

Just a note: --strict might not be ready yet. It reports some false
positives which need addressing (I have plans for this, but busy with
other things...), so expectation currently is:
1. No warnings from standard mode
2. Review and investigate warnings from 'strict' mode, but do not fix
them automatically without thinking

Best regards,
Krzysztof