From: Tom Lendacky <thomas.lendacky@amd.com>
To: Michael Kelley <mikelley@microsoft.com>,
kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, tglx@linutronix.de, mingo@redhat.com,
bp@alien8.de, dave.hansen@linux.intel.com, hpa@zytor.com,
luto@kernel.org, peterz@infradead.org,
sathyanarayanan.kuppuswamy@linux.intel.com,
kirill.shutemov@linux.intel.com, seanjc@google.com,
rick.p.edgecombe@intel.com, linux-kernel@vger.kernel.org,
linux-hyperv@vger.kernel.org, x86@kernel.org
Subject: Re: [PATCH 1/5] x86/coco: Use slow_virt_to_phys() in page transition hypervisor callbacks
Date: Mon, 2 Oct 2023 10:52:23 -0500 [thread overview]
Message-ID: <3557e754-1974-7830-0150-19e5a32c334b@amd.com> (raw)
In-Reply-To: <1696011549-28036-2-git-send-email-mikelley@microsoft.com>
On 9/29/23 13:19, Michael Kelley wrote:
> In preparation for temporarily marking pages not present during a
> transition between encrypted and decrypted, use slow_virt_to_phys()
> in the hypervisor callbacks. As long as the PFN is correct,
> slow_virt_to_phys() works even if the leaf PTE is not present.
> The existing functions that depends on vmalloc_to_page() all
> require that the leaf PTE be marked present, so they don't work.
>
> Update the comments for slow_virt_to_phys() to note this broader usage
> and the requirement to work even if the PTE is not marked present.
>
> Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> ---
> arch/x86/hyperv/ivm.c | 9 ++++++++-
> arch/x86/kernel/sev.c | 8 +++++++-
> arch/x86/mm/pat/set_memory.c | 13 +++++++++----
> 3 files changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
> index c1088d3..084fab6 100644
> --- a/arch/x86/hyperv/ivm.c
> +++ b/arch/x86/hyperv/ivm.c
> @@ -524,7 +524,14 @@ static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bo
> return false;
>
> for (i = 0, pfn = 0; i < pagecount; i++) {
> - pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE);
> + /*
> + * Use slow_virt_to_phys() because the PRESENT bit has been
> + * temporarily cleared in the PTEs. slow_virt_to_phys() works
> + * without the PRESENT bit while virt_to_hvpfn() or similar
> + * does not.
> + */
> + pfn_array[pfn] = slow_virt_to_phys((void *)kbuffer +
> + i * HV_HYP_PAGE_SIZE) >> HV_HYP_PAGE_SHIFT;
> pfn++;
>
> if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) {
> diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
> index 2787826..f5d6cec 100644
> --- a/arch/x86/kernel/sev.c
> +++ b/arch/x86/kernel/sev.c
> @@ -784,7 +784,13 @@ static unsigned long __set_pages_state(struct snp_psc_desc *data, unsigned long
> hdr->end_entry = i;
>
> if (is_vmalloc_addr((void *)vaddr)) {
> - pfn = vmalloc_to_pfn((void *)vaddr);
> + /*
> + * Use slow_virt_to_phys() because the PRESENT bit has been
Since __set_pages_state() is called by more than one path, please update
this comment to add something like "because when called via the
set_memory_encrypted() or set_memory_decrypted() path the PRESENT bit..."
Thanks,
Tom
> + * temporarily cleared in the PTEs. slow_virt_to_phys() works
> + * without the PRESENT bit while vmalloc_to_pfn() or similar
> + * does not.
> + */
> + pfn = slow_virt_to_phys((void *)vaddr) >> PAGE_SHIFT;
> use_large_entry = false;
> } else {
> pfn = __pa(vaddr) >> PAGE_SHIFT;
> diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
> index bda9f12..8e19796 100644
> --- a/arch/x86/mm/pat/set_memory.c
> +++ b/arch/x86/mm/pat/set_memory.c
> @@ -755,10 +755,15 @@ pmd_t *lookup_pmd_address(unsigned long address)
> * areas on 32-bit NUMA systems. The percpu areas can
> * end up in this kind of memory, for instance.
> *
> - * This could be optimized, but it is only intended to be
> - * used at initialization time, and keeping it
> - * unoptimized should increase the testing coverage for
> - * the more obscure platforms.
> + * It is also used in callbacks for CoCo VM page transitions between private
> + * and shared because it works when the PRESENT bit is not set in the leaf
> + * PTE. In such cases, the state of the PTEs, including the PFN, is otherwise
> + * known to be valid, so the returned physical address is correct. The similar
> + * function vmalloc_to_pfn() can't be used because it requires the PRESENT bit.
> + *
> + * This could be optimized, but it is only used in paths that are not perf
> + * sensitive, and keeping it unoptimized should increase the testing coverage
> + * for the more obscure platforms.
> */
> phys_addr_t slow_virt_to_phys(void *__virt_addr)
> {
next prev parent reply other threads:[~2023-10-02 15:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 18:19 [PATCH 0/5] x86/coco: Mark CoCo VM pages not present when changing encrypted state Michael Kelley
2023-09-29 18:19 ` [PATCH 1/5] x86/coco: Use slow_virt_to_phys() in page transition hypervisor callbacks Michael Kelley
2023-10-02 15:52 ` Tom Lendacky [this message]
2023-09-29 18:19 ` [PATCH 2/5] x86/mm: Don't do a TLB flush if changing a PTE that isn't marked present Michael Kelley
2023-09-29 18:19 ` [PATCH 3/5] x86/mm: Mark CoCo VM pages not present while changing encrypted state Michael Kelley
2023-09-29 23:13 ` kernel test robot
2023-10-02 16:35 ` Tom Lendacky
2023-10-02 18:59 ` Tom Lendacky
2023-10-02 20:43 ` Michael Kelley (LINUX)
2023-10-17 0:35 ` Michael Kelley (LINUX)
2023-09-29 18:19 ` [PATCH 4/5] x86/mm: Remove unnecessary call layer for __set_memory_enc_pgtable() Michael Kelley
2023-09-29 18:19 ` [PATCH 5/5] x86/mm: Add comments about errors in set_memory_decrypted()/encrypted() Michael Kelley
2023-10-02 15:42 ` [PATCH 0/5] x86/coco: Mark CoCo VM pages not present when changing encrypted state Tom Lendacky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3557e754-1974-7830-0150-19e5a32c334b@amd.com \
--to=thomas.lendacky@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mikelley@microsoft.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rick.p.edgecombe@intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®