From: "kishore kadiyala" <kishore.kadiyala@ti.com>
To: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jarkko.lavinen@nokia.com, madhu.cr@ti.com
Subject: [PATCH] OMAP: Fix for bus width which improves SD card's peformance.
Date: Thu, 11 Feb 2010 19:50:23 +0530 (IST) [thread overview]
Message-ID: <35697.192.168.10.89.1265898023.squirrel@dbdmail.itg.ti.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1155 bytes --]
This patch improves low speeds for SD cards.
OMAP-MMC controller's can support maximum bus width of '8'.
when bus width is mentioned as "8" in controller data,the SD
stack will check whether bus width is "4" and if not it will
set bus width to "1" and there by degrading peformance.
This patch fixes the issue and improves the performance of
SD cards.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
---
Here are my experiment numbers, on a Class 6 SDHC card:
Read peformance is increased by 220%
Write Performance is increased by 52%
drivers/mmc/host/omap_hsmmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 83f0aff..8c97c22 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2092,7 +2092,7 @@ static int __init omap_hsmmc_probe(struct platform_device
*pdev)
MMC_CAP_WAIT_WHILE_BUSY;
if (mmc_slot(host).wires >= 8)
- mmc->caps |= MMC_CAP_8_BIT_DATA;
+ mmc->caps |= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA);
else if (mmc_slot(host).wires >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
--
1.6.3.3
[-- Attachment #2: 0001-Fix-for-bus-width-which-optimizes-SD-card-s-peforman.patch --]
[-- Type: application/octet-stream, Size: 1391 bytes --]
From 34b00872530e606678f86072d46d8ca89beaa19b Mon Sep 17 00:00:00 2001
From: Kishore Kadiyala <kishore.kadiyala@ti.com>
Date: Thu, 11 Feb 2010 16:42:23 +0530
Subject: [PATCH] Fix for bus width which improves SD card's peformance.
This patch improves low speeds for SD cards.
OMAP-MMC controller's can support maximum bus width of '8'.
when bus width is mentioned as "8" in controller data,the SD
stack will check whether bus width is "4" and if not it will
set bus width to "1" and there by degrading peformance.
This patch fixes the issue and improves the performance of
SD cards.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
---
Here are my experiment numbers, on a Class 6 SDHC card:
Read peformance is increased by 220%
Write Performance is increased by 52%
drivers/mmc/host/omap_hsmmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 83f0aff..8c97c22 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2092,7 +2092,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
MMC_CAP_WAIT_WHILE_BUSY;
if (mmc_slot(host).wires >= 8)
- mmc->caps |= MMC_CAP_8_BIT_DATA;
+ mmc->caps |= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA);
else if (mmc_slot(host).wires >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
--
1.6.3.3
next reply other threads:[~2010-02-11 14:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-11 14:20 kishore kadiyala [this message]
2010-02-11 17:34 ` Madhusudhan
2010-03-31 6:07 ` [PATCH-V2] " kishore kadiyala
2010-03-31 6:27 ` Vimal Singh
2010-03-31 7:03 ` kishore kadiyala
2010-03-31 13:11 ` Jarkko Nikula
2010-03-31 16:37 ` Madhusudhan
2010-04-01 6:31 ` kishore kadiyala
2010-04-01 15:41 ` Madhusudhan
2010-04-05 12:56 ` [PATCH v3] " kishore kadiyala
2010-04-05 16:48 ` Felipe Balbi
2010-04-05 17:19 ` Madhusudhan
2010-04-05 17:43 ` Madhusudhan
2010-04-06 5:00 ` Felipe Balbi
2010-04-06 16:16 ` Madhusudhan
2010-04-06 16:32 ` Felipe Balbi
2010-04-06 16:55 ` Nishanth Menon
2010-04-06 16:57 ` Felipe Balbi
2010-04-06 23:23 ` Madhusudhan
2010-04-06 23:39 ` Nishanth Menon
2010-04-07 0:16 ` Madhusudhan
2010-04-07 0:57 ` Nishanth Menon
2010-04-08 16:57 ` Madhusudhan
2010-04-19 15:36 ` [PATCH v4] " kishore kadiyala
2010-04-19 15:51 ` kishore kadiyala
2010-04-22 0:26 ` Madhusudhan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35697.192.168.10.89.1265898023.squirrel@dbdmail.itg.ti.com \
--to=kishore.kadiyala@ti.com \
--cc=jarkko.lavinen@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=madhu.cr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®