Re: [PATCH v2 7/7] arm64: dts: qcom: qcs8300-ride: add anx7625 DSI to DP bridge node

[Ayushi Makhija <quic_amakhija@quicinc.com>]

On 10/6/2025 3:46 PM, Dmitry Baryshkov wrote:
> On Mon, Oct 06, 2025 at 07:09:24AM +0530, Ayushi Makhija wrote:
>> Add anx7625 DSI to DP bridge device node.
>>
>> Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 170 ++++++++++++++++++++++
>>  1 file changed, 170 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> index 891e49602c97..5d4040376857 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
>> @@ -24,6 +24,64 @@ chosen {
>>  		stdout-path = "serial0:115200n8";
>>  	};
>>  
>> +	vreg_12p0: vreg-12p0-regulator {
> 
> Why are these nodes not in a correct place? Also, why are they named
> differently from all other regulators in this board file?

Hi Dmitry,

Will keep the nodes at their correct place based on alphabetical order in next patchset.
Similar names I have used in LeMans for these regulators. We have kept these name based on the information of these regulator we got from SW doc for monaco.

Thanks,
Ayushi