Re: [PATCH v2 6/7] arm64: dts: qcom: qcs8300: add Display Serial Interface device nodes

[Ayushi Makhija <quic_amakhija@quicinc.com>]

[-- Attachment #1: Type: text/plain, Size: 851 bytes --]

On 10/6/2025 3:44 PM, Dmitry Baryshkov wrote:
> On Mon, Oct 06, 2025 at 07:09:23AM +0530, Ayushi Makhija wrote:
>> Add device tree nodes for the DSI0 controller with their corresponding
>> PHY found on Qualcomm QCS8300 SoC.
>>
>> Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8300.dtsi | 98 ++++++++++++++++++++++++++-
>>  1 file changed, 97 insertions(+), 1 deletion(-)
>>
>> +
>> +				mdss_dsi_opp_table: opp-table {
>> +					compatible = "operating-points-v2";
>> +
>> +					opp-358000000 {
>> +						opp-hz = /bits/ 64 <358000000>;
>> +						required-opps = <&rpmhpd_opp_svs_l1>;
>> +					};
> 
> Does it really support only a single freq?
> 

Hi Dmitry, yes it support only single opp frequency, I got this information from ipcat sw for monaco, similar
we have used for LeMans.

Thanks,
Ayushi


[-- Attachment #2: https://elixir.bootlin.com/linux/v6.17/source/arch/arm64/boot/dts/qcom/sa8775p.dtsi#L4541 --]
[-- Type: text/html, Size: 4410 bytes --]