From: Ludovic BARRE <ludovic.barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
DTML <devicetree@vger.kernel.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit
Date: Tue, 11 Dec 2018 10:53:04 +0100 [thread overview]
Message-ID: <35f22c1a-888d-5abd-7ffe-ecf47a74b69a@st.com> (raw)
In-Reply-To: <CAPDyKFq7TZMKWMqmoDR0yfr2N2cf2nr4-BuEs5DPgJSGy-nvAA@mail.gmail.com>
On 12/11/18 10:47 AM, Ulf Hansson wrote:
> On Thu, 6 Dec 2018 at 16:13, Ludovic Barre <ludovic.Barre@st.com> wrote:
>>
>> From: Ludovic Barre <ludovic.barre@st.com>
>>
>> On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set
>> cmdstop bit in command register. The CPSM ("Command Path State Machine")
>> treats the command as a Stop Transmission command and signals
>> abort to the DPSM ("Data Path State Machine").
>>
>> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
>
> Applied for next, thanks!
thanks
>
> Withholding patch2 for a while, as I need some more time to review it.
No problem,
Regards
Ludo
>
> Kind regards
> Uffe
>
>> ---
>> drivers/mmc/host/mmci.c | 6 ++++++
>> drivers/mmc/host/mmci.h | 2 ++
>> 2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
>> index 13fa640..e352f5a 100644
>> --- a/drivers/mmc/host/mmci.c
>> +++ b/drivers/mmc/host/mmci.c
>> @@ -21,6 +21,7 @@
>> #include <linux/err.h>
>> #include <linux/highmem.h>
>> #include <linux/log2.h>
>> +#include <linux/mmc/mmc.h>
>> #include <linux/mmc/pm.h>
>> #include <linux/mmc/host.h>
>> #include <linux/mmc/card.h>
>> @@ -274,6 +275,7 @@ static struct variant_data variant_stm32_sdmmc = {
>> .cmdreg_lrsp_crc = MCI_CPSM_STM32_LRSP_CRC,
>> .cmdreg_srsp_crc = MCI_CPSM_STM32_SRSP_CRC,
>> .cmdreg_srsp = MCI_CPSM_STM32_SRSP,
>> + .cmdreg_stop = MCI_CPSM_STM32_CMDSTOP,
>> .data_cmd_enable = MCI_CPSM_STM32_CMDTRANS,
>> .irq_pio_mask = MCI_IRQ_PIO_STM32_MASK,
>> .datactrl_first = true,
>> @@ -1100,6 +1102,10 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
>> mmci_reg_delay(host);
>> }
>>
>> + if (host->variant->cmdreg_stop &&
>> + cmd->opcode == MMC_STOP_TRANSMISSION)
>> + c |= host->variant->cmdreg_stop;
>> +
>> c |= cmd->opcode | host->variant->cmdreg_cpsm_enable;
>> if (cmd->flags & MMC_RSP_PRESENT) {
>> if (cmd->flags & MMC_RSP_136)
>> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
>> index 550dd39..2422909 100644
>> --- a/drivers/mmc/host/mmci.h
>> +++ b/drivers/mmc/host/mmci.h
>> @@ -264,6 +264,7 @@ struct mmci_host;
>> * @cmdreg_lrsp_crc: enable value for long response with crc
>> * @cmdreg_srsp_crc: enable value for short response with crc
>> * @cmdreg_srsp: enable value for short response without crc
>> + * @cmdreg_stop: enable value for stop and abort transmission
>> * @datalength_bits: number of bits in the MMCIDATALENGTH register
>> * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
>> * is asserted (likewise for RX)
>> @@ -316,6 +317,7 @@ struct variant_data {
>> unsigned int cmdreg_lrsp_crc;
>> unsigned int cmdreg_srsp_crc;
>> unsigned int cmdreg_srsp;
>> + unsigned int cmdreg_stop;
>> unsigned int datalength_bits;
>> unsigned int fifosize;
>> unsigned int fifohalfsize;
>> --
>> 2.7.4
>>
next prev parent reply other threads:[~2018-12-11 9:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-06 15:13 [PATCH V3 0/2] mmc: mmci: add stop command Ludovic Barre
2018-12-06 15:13 ` [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit Ludovic Barre
2018-12-11 9:47 ` Ulf Hansson
2018-12-11 9:53 ` Ludovic BARRE [this message]
2019-01-03 10:35 ` Ludovic BARRE
2019-01-24 15:03 ` [Linux-stm32] " Ludovic BARRE
2019-01-24 15:12 ` Ulf Hansson
2018-12-06 15:13 ` [PATCH V3 2/2] mmc: mmci: send stop command to clear the dpsm Ludovic Barre
2019-01-29 14:31 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35f22c1a-888d-5abd-7ffe-ecf47a74b69a@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®