mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ludovic BARRE <ludovic.barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: DTML <devicetree@vger.kernel.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [Linux-stm32] [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit
Date: Thu, 24 Jan 2019 16:03:38 +0100	[thread overview]
Message-ID: <ab4cae87-0a5a-fe22-08ab-7c7661be7c8c@st.com> (raw)
In-Reply-To: <9e22fd3d-f029-2a2a-18d1-af1987c94e4e@st.com>

hi Ulf

I don't think you've seen my previous mail :-(
what is your feeling about "mmc: mmci: send stop command to clear the dpsm"

Regards
Ludo

On 1/3/19 11:35 AM, Ludovic BARRE wrote:
> hi Ulf
> 
> happy new years.
> 
> Just a gentleman ping about patch2 of this series
> "mmc: mmci: send stop command to clear the dpsm."
> 
> Regards
> Ludo
> 
> On 12/11/18 10:53 AM, Ludovic BARRE wrote:
>>
>>
>> On 12/11/18 10:47 AM, Ulf Hansson wrote:
>>> On Thu, 6 Dec 2018 at 16:13, Ludovic Barre <ludovic.Barre@st.com> wrote:
>>>>
>>>> From: Ludovic Barre <ludovic.barre@st.com>
>>>>
>>>> On cmd12 (STOP_TRANSMISSION), STM32 sdmmc variant needs to set
>>>> cmdstop bit in command register. The CPSM ("Command Path State 
>>>> Machine")
>>>> treats the command as a Stop Transmission command and signals
>>>> abort to the DPSM ("Data Path State Machine").
>>>>
>>>> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
>>>
>>> Applied for next, thanks!
>>
>> thanks
>>
>>>
>>> Withholding patch2 for a while, as I need some more time to review it.
>>
>> No problem,
>>
>> Regards
>> Ludo
>>
>>>
>>> Kind regards
>>> Uffe
>>>
>>>> ---
>>>>   drivers/mmc/host/mmci.c | 6 ++++++
>>>>   drivers/mmc/host/mmci.h | 2 ++
>>>>   2 files changed, 8 insertions(+)
>>>>
>>>> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
>>>> index 13fa640..e352f5a 100644
>>>> --- a/drivers/mmc/host/mmci.c
>>>> +++ b/drivers/mmc/host/mmci.c
>>>> @@ -21,6 +21,7 @@
>>>>   #include <linux/err.h>
>>>>   #include <linux/highmem.h>
>>>>   #include <linux/log2.h>
>>>> +#include <linux/mmc/mmc.h>
>>>>   #include <linux/mmc/pm.h>
>>>>   #include <linux/mmc/host.h>
>>>>   #include <linux/mmc/card.h>
>>>> @@ -274,6 +275,7 @@ static struct variant_data variant_stm32_sdmmc = {
>>>>          .cmdreg_lrsp_crc        = MCI_CPSM_STM32_LRSP_CRC,
>>>>          .cmdreg_srsp_crc        = MCI_CPSM_STM32_SRSP_CRC,
>>>>          .cmdreg_srsp            = MCI_CPSM_STM32_SRSP,
>>>> +       .cmdreg_stop            = MCI_CPSM_STM32_CMDSTOP,
>>>>          .data_cmd_enable        = MCI_CPSM_STM32_CMDTRANS,
>>>>          .irq_pio_mask           = MCI_IRQ_PIO_STM32_MASK,
>>>>          .datactrl_first         = true,
>>>> @@ -1100,6 +1102,10 @@ mmci_start_command(struct mmci_host *host, 
>>>> struct mmc_command *cmd, u32 c)
>>>>                  mmci_reg_delay(host);
>>>>          }
>>>>
>>>> +       if (host->variant->cmdreg_stop &&
>>>> +           cmd->opcode == MMC_STOP_TRANSMISSION)
>>>> +               c |= host->variant->cmdreg_stop;
>>>> +
>>>>          c |= cmd->opcode | host->variant->cmdreg_cpsm_enable;
>>>>          if (cmd->flags & MMC_RSP_PRESENT) {
>>>>                  if (cmd->flags & MMC_RSP_136)
>>>> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
>>>> index 550dd39..2422909 100644
>>>> --- a/drivers/mmc/host/mmci.h
>>>> +++ b/drivers/mmc/host/mmci.h
>>>> @@ -264,6 +264,7 @@ struct mmci_host;
>>>>    * @cmdreg_lrsp_crc: enable value for long response with crc
>>>>    * @cmdreg_srsp_crc: enable value for short response with crc
>>>>    * @cmdreg_srsp: enable value for short response without crc
>>>> + * @cmdreg_stop: enable value for stop and abort transmission
>>>>    * @datalength_bits: number of bits in the MMCIDATALENGTH register
>>>>    * @fifosize: number of bytes that can be written when 
>>>> MMCI_TXFIFOEMPTY
>>>>    *           is asserted (likewise for RX)
>>>> @@ -316,6 +317,7 @@ struct variant_data {
>>>>          unsigned int            cmdreg_lrsp_crc;
>>>>          unsigned int            cmdreg_srsp_crc;
>>>>          unsigned int            cmdreg_srsp;
>>>> +       unsigned int            cmdreg_stop;
>>>>          unsigned int            datalength_bits;
>>>>          unsigned int            fifosize;
>>>>          unsigned int            fifohalfsize;
>>>> -- 
>>>> 2.7.4
>>>>
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32

  reply	other threads:[~2019-01-24 15:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-06 15:13 [PATCH V3 0/2] mmc: mmci: add stop command Ludovic Barre
2018-12-06 15:13 ` [PATCH V3 1/2] mmc: mmci: add variant property to set command stop bit Ludovic Barre
2018-12-11  9:47   ` Ulf Hansson
2018-12-11  9:53     ` Ludovic BARRE
2019-01-03 10:35       ` Ludovic BARRE
2019-01-24 15:03         ` Ludovic BARRE [this message]
2019-01-24 15:12           ` [Linux-stm32] " Ulf Hansson
2018-12-06 15:13 ` [PATCH V3 2/2] mmc: mmci: send stop command to clear the dpsm Ludovic Barre
2019-01-29 14:31   ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ab4cae87-0a5a-fe22-08ab-7c7661be7c8c@st.com \
    --to=ludovic.barre@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®