* EISA AIC7XXX not detected
@ 2002-10-23 19:40 Denis Vlasenko
2002-10-23 15:06 ` Richard B. Johnson
2002-10-23 15:09 ` Justin T. Gibbs
0 siblings, 2 replies; 7+ messages in thread
From: Denis Vlasenko @ 2002-10-23 19:40 UTC (permalink / raw)
To: Justin T. Gibbs; +Cc: linux-kernel
Hi,
I have an oldie Pentium 66 box which was running OS/2
for a very long time. Probably the last OS/2 box in our town :)
I want to convert it into backup web server.
The problem is that it does not see its disks when I boot Linux.
Currently I'm running it in NFS root mode, but 16MB RAM is not
much fun without swap :(
I'd like to stick printks here and there in driver source,
thought you may have some advice.
In particular, is this relevant?
"kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2"
--
vda
syslog:
=======
Oct 20 06:58:55 guard syslogd 1.4.1: restart.
Oct 20 06:58:57 guard su[297]: + console root-root
Oct 20 06:58:57 guard kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 20 06:58:57 guard kernel: Linux version 2.4.19net2 (root@pegasus) (gcc version 3.2) #2 SMP Fri Oct 18 12:42:20 GMT+2 2002
Oct 20 06:58:57 guard kernel: BIOS-provided physical RAM map:
Oct 20 06:58:57 guard kernel: BIOS-88: 0000000000000000 - 000000000009f000 (usable)
Oct 20 06:58:57 guard kernel: BIOS-88: 0000000000100000 - 0000000001000000 (usable)
Oct 20 06:58:57 guard kernel: 16MB LOWMEM available.
Oct 20 06:58:57 guard kernel: Advanced speculative caching feature not present
Oct 20 06:58:57 guard kernel: On node 0 totalpages: 4096
Oct 20 06:58:57 guard kernel: zone(0): 4096 pages.
Oct 20 06:58:57 guard kernel: zone(1): 0 pages.
Oct 20 06:58:57 guard kernel: zone(2): 0 pages.
Oct 20 06:58:57 guard kernel: Kernel command line: root=/dev/nfs nfsroot=172.16.42.75:/.rootfs/.std,hard,intr ip=:172.16.42.75:::(none):eth1:dhcp devfs=mount
Oct 20 06:58:57 guard kernel: No local APIC present or hardware disabled
Oct 20 06:58:57 guard kernel: Initializing CPU#0
Oct 20 06:58:57 guard kernel: Detected 66.670 MHz processor.
Oct 20 06:58:57 guard kernel: Console: colour VGA+ 80x30
Oct 20 06:58:57 guard kernel: Calibrating delay loop... 132.71 BogoMIPS
Oct 20 06:58:57 guard kernel: Memory: 12460k/16384k available (1800k kernel code, 3536k reserved, 530k data, 564k init, 0k highmem)
Oct 20 06:58:57 guard kernel: Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Oct 20 06:58:57 guard kernel: Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Oct 20 06:58:57 guard kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 20 06:58:57 guard kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct 20 06:58:57 guard kernel: Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 20 06:58:57 guard kernel: CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0
Oct 20 06:58:57 guard kernel: Intel Pentium with F0 0F bug - workaround enabled.
Oct 20 06:58:57 guard kernel: CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: CPU: After generic, caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: CPU: Common caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: Checking 'hlt' instruction... OK.
Oct 20 06:58:57 guard kernel: Checking for popad bug... OK.
Oct 20 06:58:57 guard kernel: POSIX conformance testing by UNIFIX
Oct 20 06:58:57 guard kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 20 06:58:57 guard kernel: mtrr: detected mtrr type: none
Oct 20 06:58:57 guard kernel: CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0
Oct 20 06:58:57 guard kernel: CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: CPU: After generic, caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: CPU: Common caps: 000001bf 00000000 00000000 00000000
Oct 20 06:58:57 guard kernel: CPU0: Intel Pentium 60/66 stepping 07
Oct 20 06:58:57 guard kernel: per-CPU timeslice cutoff: 161.34 usecs.
Oct 20 06:58:57 guard kernel: SMP motherboard not detected.
Oct 20 06:58:57 guard kernel: Local APIC not detected. Using dummy APIC emulation.
Oct 20 06:58:57 guard kernel: Waiting on wait_init_idle (map = 0x0)
Oct 20 06:58:57 guard kernel: All processors have done init_idle
Oct 20 06:58:57 guard kernel: PCI: PCI BIOS revision 2.10 entry at 0xf192b, last bus=0
Oct 20 06:58:57 guard kernel: PCI: Using configuration type 2
Oct 20 06:58:57 guard kernel: PCI: Probing PCI hardware
Oct 20 06:58:57 guard kernel: Linux NET4.0 for Linux 2.4
Oct 20 06:58:57 guard kernel: Based upon Swansea University Computer Society NET3.039
Oct 20 06:58:57 guard kernel: Initializing RT netlink socket
Oct 20 06:58:57 guard kernel: Starting kswapd
Oct 20 06:58:57 guard kernel: devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
Oct 20 06:58:57 guard kernel: devfs: boot_options: 0x1
Oct 20 06:58:57 guard kernel: pty: 256 Unix98 ptys configured
Oct 20 06:58:57 guard kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Oct 20 06:58:57 guard kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 20 06:58:57 guard kernel: Floppy drive(s): fd0 is 1.44M
Oct 20 06:58:57 guard kernel: FDC 0 is a post-1991 82077
Oct 20 06:58:57 guard kernel: eth0: 3c5x9 at 0x6000, BNC port, address 00 20 af 99 f3 00, IRQ 5.
Oct 20 06:58:57 guard kernel: 3c509.c:1.18c 1Mar2002 becker@scyld.com
Oct 20 06:58:57 guard kernel: http://www.scyld.com/network/3c509.html
Oct 20 06:58:57 guard kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 20 06:58:57 guard kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Oct 20 06:58:57 guard kernel: FW Version=$Version$
Oct 20 06:58:57 guard kernel: pcnet32.c:v1.27a 10.02.2002 tsbogend@alpha.franken.de
Oct 20 06:58:57 guard kernel: ThunderLAN driver v1.15
Oct 20 06:58:57 guard kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Oct 20 06:58:57 guard kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Oct 20 06:58:57 guard kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Oct 20 06:58:57 guard kernel: sk98lin: Network Device Driver v4.06
Oct 20 06:58:57 guard kernel: Copyright (C) 2000-2001 SysKonnect GmbH.
Oct 20 06:58:57 guard kernel: No adapter found
Oct 20 06:58:57 guard kernel: 8139too Fast Ethernet driver 0.9.25
Oct 20 06:58:57 guard kernel: eth1: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xc180fc00, 00:10:b5:41:45:c4, IRQ 15
Oct 20 06:58:57 guard kernel: eth1: Identified 8139 chip type 'RTL-8139B'
Oct 20 06:58:57 guard kernel: eth2: i82596 initialization timed out
Oct 20 06:58:57 guard kernel: SCSI subsystem driver Revision: 1.00
Oct 20 06:58:57 guard kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Oct 20 06:58:57 guard kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 20 06:58:57 guard kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 20 06:58:57 guard kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Oct 20 06:58:57 guard kernel: TCP: Hash tables configured (established 1024 bind 1024)
Oct 20 06:58:57 guard kernel: eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Oct 20 06:58:57 guard kernel: Sending DHCP requests ..., OK
Oct 20 06:58:57 guard kernel: IP-Config: Got DHCP answer from 255.255.255.255, my address is 172.16.42.235
Oct 20 06:58:57 guard kernel: IP-Config: Complete:
Oct 20 06:58:57 guard kernel: device=eth1, addr=172.16.42.235, mask=255.255.255.0, gw=172.16.42.98,
Oct 20 06:58:57 guard kernel: host=(none), domain=, nis-domain=(none),
Oct 20 06:58:57 guard kernel: bootserver=255.255.255.255, rootserver=172.16.42.75, rootpath=
Oct 20 06:58:57 guard kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 20 06:58:58 guard kernel: Looking up port of RPC 100003/2 on 172.16.42.75
Oct 20 06:58:58 guard kernel: Looking up port of RPC 100005/1 on 172.16.42.75
Oct 20 06:58:58 guard kernel: VFS: Mounted root (nfs filesystem).
Oct 20 06:58:58 guard kernel: Mounted devfs on /dev
Oct 20 06:58:58 guard kernel: Freeing unused kernel memory: 564k freed
.config
=======
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_M386=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_EISA=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PNP=m
CONFIG_ISAPNP=m
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_LVM=m
CONFIG_PACKET=m
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_ATARAID=m
CONFIG_BLK_DEV_ATARAID_PDC=m
CONFIG_BLK_DEV_ATARAID_HPT=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_PROBE_EISA_VL=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=y
CONFIG_VORTEX=y
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRA=y
CONFIG_SMC9194=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=y
CONFIG_NI52=y
CONFIG_NI65=y
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NET_ISA=y
CONFIG_E2100=y
CONFIG_EWRK3=y
CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_HPLAN_PLUS=y
CONFIG_HPLAN=y
CONFIG_LP486E=y
CONFIG_ETH16I=y
CONFIG_NE2000=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=y
CONFIG_APRICOT=y
CONFIG_CS89x0=y
CONFIG_TULIP=y
CONFIG_DE4X5=y
CONFIG_DGRS=y
CONFIG_DM9102=y
CONFIG_EEPRO100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NATSEMI_CABLE_MAGIC=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
CONFIG_WINBOND_840=y
CONFIG_ACENIC=y
CONFIG_DL2K=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_SK98LIN=y
CONFIG_TIGON3=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_RCPCI=m
CONFIG_SHAPER=m
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_LOGIBUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_MOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
CONFIG_QIC02_TAPE=m
CONFIG_INTEL_RNG=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_BFS_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=y
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_RW=y
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
CONFIG_ZLIB_FS_INFLATE=y
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_RIVA=m
CONFIG_FB_CLGEN=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_PM2_PCI=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_G450=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY128=m
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_3DFX=m
CONFIG_FB_VOODOO1=m
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_HGA=m
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=m
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_VIA82CXXX=m
CONFIG_SOUND_OSS=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: EISA AIC7XXX not detected
2002-10-23 19:40 EISA AIC7XXX not detected Denis Vlasenko
@ 2002-10-23 15:06 ` Richard B. Johnson
2002-10-23 15:09 ` Justin T. Gibbs
1 sibling, 0 replies; 7+ messages in thread
From: Richard B. Johnson @ 2002-10-23 15:06 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: Justin T. Gibbs, linux-kernel
On Wed, 23 Oct 2002, Denis Vlasenko wrote:
> Hi,
>
> I have an oldie Pentium 66 box which was running OS/2
> for a very long time. Probably the last OS/2 box in our town :)
>
> I want to convert it into backup web server.
>
> The problem is that it does not see its disks when I boot Linux.
> Currently I'm running it in NFS root mode, but 16MB RAM is not
> much fun without swap :(
>
> I'd like to stick printks here and there in driver source,
> thought you may have some advice.
>
> In particular, is this relevant?
> "kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2"
> --
Yes. You need to load aic7xxx.o, the SCSI driver. in /etc/modules.conf
you need:
alias scsi_hostadapter scsi_mod
alias scsi_hostadapter sd_mod
alias scsi_hostadapter aic7xxx
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias char-major-9 st
That should get your SCSI stuff running including tape and CDROM.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.18 on an i686 machine (797.90 BogoMips).
Bush : The Fourth Reich of America
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: EISA AIC7XXX not detected
2002-10-23 19:40 EISA AIC7XXX not detected Denis Vlasenko
2002-10-23 15:06 ` Richard B. Johnson
@ 2002-10-23 15:09 ` Justin T. Gibbs
2002-10-24 13:45 ` Denis Vlasenko
1 sibling, 1 reply; 7+ messages in thread
From: Justin T. Gibbs @ 2002-10-23 15:09 UTC (permalink / raw)
To: vda; +Cc: linux-kernel
> Hi,
>
> I have an oldie Pentium 66 box which was running OS/2
> for a very long time. Probably the last OS/2 box in our town :)
>
> I want to convert it into backup web server.
>
> The problem is that it does not see its disks when I boot Linux.
> Currently I'm running it in NFS root mode, but 16MB RAM is not
> much fun without swap :(
>
> I'd like to stick printks here and there in driver source,
> thought you may have some advice.
Since you seem to have enabled the EISA/VLB probe in your config,
I don't know why your controller is not probed.
--
Justin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: EISA AIC7XXX not detected
2002-10-23 15:09 ` Justin T. Gibbs
@ 2002-10-24 13:45 ` Denis Vlasenko
2002-10-24 14:12 ` Denis Vlasenko
0 siblings, 1 reply; 7+ messages in thread
From: Denis Vlasenko @ 2002-10-24 13:45 UTC (permalink / raw)
To: Justin T. Gibbs; +Cc: linux-kernel
On 23 October 2002 13:09, Justin T. Gibbs wrote:
> > Hi,
> >
> > I have an oldie Pentium 66 box which was running OS/2
> > for a very long time. Probably the last OS/2 box in our town :)
> >
> > I want to convert it into backup web server.
> >
> > The problem is that it does not see its disks when I boot Linux.
> > Currently I'm running it in NFS root mode, but 16MB RAM is not
> > much fun without swap :(
> >
> > I'd like to stick printks here and there in driver source,
> > thought you may have some advice.
>
> Since you seem to have enabled the EISA/VLB probe in your config,
> I don't know why your controller is not probed.
I sticked some printks in the code, here is a new syslog output
(diff with printks is an the end).
Oct 21 02:31:50 guard kernel: SCSI subsystem driver Revision: 1.00
Oct 21 02:31:50 guard kernel: vda: ahc_linux_detect(): 1
Oct 21 02:31:50 guard kernel: vda: ahc_linux_detect(): 2
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x1c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x2c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x3c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x4c00
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: id=0x4907782
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: entry->full_id entry->id_mask id&entry->id_mask
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907771 0xffffffff 0x4907782
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907756 0xfffffffe 0x4907782
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907770 0xffffffff 0x4907782
seems my controller is not considered compatible ;)
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: aic7770_find_device failed
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x5c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x6c00
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: id=0x506d5093
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: entry->full_id entry->id_mask id&entry->id_mask
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907771 0xffffffff 0x506d5093
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907756 0xfffffffe 0x506d5092
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907770 0xffffffff 0x506d5093
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: aic7770_find_device failed
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x7c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x8c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0x9c00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xac00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xbc00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xcc00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xdc00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xec00
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: no EISA card in slot
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: probing 0xfc00
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: id=0x3d891271
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: entry->full_id entry->id_mask id&entry->id_mask
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907771 0xffffffff 0x3d891271
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907756 0xfffffffe 0x3d891270
Oct 21 02:31:51 guard kernel: vda: aic7770_find_device: 0x4907770 0xffffffff 0x3d891271
Oct 21 02:31:51 guard kernel: vda: aic7770_linux_probe: aic7770_find_device failed
Oct 21 02:31:51 guard kernel: vda: ahc_linux_detect(): 3
Oct 21 02:31:51 guard kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Oct 21 02:31:51 guard kernel: NET4: Linux TCP/IP 1.0 for NET4.0
diff -u --recursive linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770.c linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770.c
--- linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770.c Fri Aug 2 22:39:44 2002
+++ linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770.c Thu Oct 24 09:21:20 2002
@@ -93,8 +93,13 @@
struct aic7770_identity *entry;
int i;
+ printk(KERN_DEBUG "vda: aic7770_find_device: id=0x%04x\n",id);
+ printk(KERN_DEBUG "vda: aic7770_find_device: entry->full_id entry->id_mask id&entry->id_mask\n");
for (i = 0; i < ahc_num_aic7770_devs; i++) {
entry = &aic7770_ident_table[i];
+ printk(KERN_DEBUG "vda: aic7770_find_device: 0x%04x 0x%04x 0x%04x\n",
+ entry->full_id,entry->id_mask,id&entry->id_mask
+ );
if (entry->full_id == (id & entry->id_mask))
return (entry);
}
diff -u --recursive linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770_osm.c linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770_osm.c
--- linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770_osm.c Fri Aug 2 22:39:44 2002
+++ linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770_osm.c Thu Oct 24 09:12:05 2002
@@ -58,11 +58,14 @@
eisaBase = 0x1000 + AHC_EISA_SLOT_OFFSET;
found = 0;
for (slot = 1; slot < NUMSLOTS; eisaBase+=0x1000, slot++) {
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: probing 0x%04x\n",eisaBase);
uint32_t eisa_id;
size_t id_size;
- if (check_region(eisaBase, AHC_EISA_IOSIZE) != 0)
+ if (check_region(eisaBase, AHC_EISA_IOSIZE) != 0) {
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: check_region failed\n");
continue;
+ }
eisa_id = 0;
id_size = sizeof(eisa_id);
@@ -72,10 +75,14 @@
eisa_id |= inb(eisaBase + IDOFFSET + i)
<< ((id_size-i-1) * 8);
}
- if (eisa_id & 0x80000000)
+ if (eisa_id & 0x80000000) {
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: no EISA card in slot\n");
continue; /* no EISA card in slot */
+ }
entry = aic7770_find_device(eisa_id);
+ if (entry == NULL)
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: aic7770_find_device failed\n");
if (entry != NULL) {
char buf[80];
char *name;
@@ -88,8 +95,10 @@
*/
sprintf(buf, "ahc_eisa:%d", slot);
name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
- if (name == NULL)
+ if (name == NULL) {
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: malloc failed\n");
break;
+ }
strcpy(name, buf);
ahc = ahc_alloc(template, name);
if (ahc == NULL) {
@@ -98,12 +107,14 @@
* chances are we won't be able to
* allocate future card structures.
*/
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: ahc_alloc failed\n");
break;
}
error = aic7770_config(ahc, entry, eisaBase);
if (error != 0) {
ahc->bsh.ioport = 0;
ahc_free(ahc);
+ printk(KERN_DEBUG "vda: aic7770_linux_probe: aic7770_config failed\n");
continue;
}
found++;
diff -u --recursive linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7xxx_osm.c linux-2.4.19net3/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7xxx_osm.c Fri Aug 2 22:39:44 2002
+++ linux-2.4.19net3/drivers/scsi/aic7xxx/aic7xxx_osm.c Thu Oct 24 09:03:53 2002
@@ -1116,6 +1116,7 @@
* this lock just prior to calling us.
*/
spin_unlock_irq(&io_request_lock);
+ printk(KERN_DEBUG "vda: ahc_linux_detect(): 1\n");
/*
* Sanity checking of Linux SCSI data structures so
@@ -1167,8 +1168,10 @@
ahc_linux_pci_probe(template);
#endif
+ printk(KERN_DEBUG "vda: ahc_linux_detect(): 2\n");
if (aic7xxx_no_probe == 0)
aic7770_linux_probe(template);
+ printk(KERN_DEBUG "vda: ahc_linux_detect(): 3\n");
/*
* Register with the SCSI layer all
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: EISA AIC7XXX not detected
2002-10-24 13:45 ` Denis Vlasenko
@ 2002-10-24 14:12 ` Denis Vlasenko
2002-10-24 16:54 ` Justin T. Gibbs
0 siblings, 1 reply; 7+ messages in thread
From: Denis Vlasenko @ 2002-10-24 14:12 UTC (permalink / raw)
To: Justin T. Gibbs; +Cc: linux-kernel
> I sticked some printks in the code, here is a new syslog output
> (diff with printks is an the end).
>
> ...
> seems my controller is not considered compatible ;)
> ...
With this patch it got detected. Seems to work fine.
Please inform me when (and whether) you plan to push it
to Marcelo.
(of course feel free to edit the patch, I don't insist on 'vda'
being there :)
--
vda
diff -u --recursive linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770.c linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770.c
--- linux-2.4.19net3.orig/drivers/scsi/aic7xxx/aic7770.c Fri Aug 2 22:39:44 2002
+++ linux-2.4.19net3/drivers/scsi/aic7xxx/aic7770.c Thu Oct 24 11:56:23 2002
@@ -56,6 +56,7 @@
#define ID_AHA_274x 0x04907771
#define ID_AHA_284xB 0x04907756 /* BIOS enabled */
#define ID_AHA_284x 0x04907757 /* BIOS disabled*/
+#define ID_AIC_vda 0x04907782
static int aha2840_load_seeprom(struct ahc_softc *ahc);
static ahc_device_setup_t ahc_aic7770_VL_setup;
@@ -83,7 +84,14 @@
0xFFFFFFFF,
"Adaptec aic7770 SCSI adapter",
ahc_aic7770_EISA_setup
- }
+ },
+ /* vda */
+ {
+ ID_AIC_vda,
+ 0xFFFFFFFF,
+ "Adaptec aic7782 SCSI adapter (seen: Olivetti 2 channel EISA)",
+ ahc_aic7770_EISA_setup
+ },
};
const int ahc_num_aic7770_devs = NUM_ELEMENTS(aic7770_ident_table);
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: EISA AIC7XXX not detected
2002-10-24 14:12 ` Denis Vlasenko
@ 2002-10-24 16:54 ` Justin T. Gibbs
2002-10-25 10:45 ` Denis Vlasenko
0 siblings, 1 reply; 7+ messages in thread
From: Justin T. Gibbs @ 2002-10-24 16:54 UTC (permalink / raw)
To: vda; +Cc: linux-kernel
> With this patch it got detected. Seems to work fine.
> Please inform me when (and whether) you plan to push it
> to Marcelo.
>
> (of course feel free to edit the patch, I don't insist on 'vda'
> being there :)
Can you send me the chip markings on your controller as well as any
information that it affixed to the controller board (Stickers with
model numbers, etc)?
Thanks,
Justin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: EISA AIC7XXX not detected
2002-10-24 16:54 ` Justin T. Gibbs
@ 2002-10-25 10:45 ` Denis Vlasenko
0 siblings, 0 replies; 7+ messages in thread
From: Denis Vlasenko @ 2002-10-25 10:45 UTC (permalink / raw)
To: Justin T. Gibbs; +Cc: linux-kernel
On 24 October 2002 14:54, Justin T. Gibbs wrote:
> > With this patch it got detected. Seems to work fine.
> > Please inform me when (and whether) you plan to push it
> > to Marcelo.
> >
> > (of course feel free to edit the patch, I don't insist on 'vda'
> > being there :)
>
> Can you send me the chip markings on your controller as well as any
> information that it affixed to the controller board (Stickers with
> model numbers, etc)?
This board is not very big.
Biggest chip has this printed on:
adaptec
AIC-7770P
EQEA440
711211
A48061.1
KOREA
Second big chip has a rather uninformative sticker with letters "PD2U"
slapped on so I can't see what is printed on chip :(
This text is printed on the back side of the board:
"(c) OLIVETTI,1994 G0622C COD.794126L /00 B-S-C4
There is a barcode printed on a side, do you need it? :)
Also I see at least 3 SCSI connectors. One on a side, accessible
from the rear of the box when board sits in EISA slot.
Two connectors are on the top side (opposite to EISA bus connector).
And I see something like 2 more SCSI connectors right
on the board surface.
This box is accompanied with configuration diskettes, I'll send 'em
to you off-list.
--
vda
from those attached.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2002-10-25 5:51 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-10-23 19:40 EISA AIC7XXX not detected Denis Vlasenko
2002-10-23 15:06 ` Richard B. Johnson
2002-10-23 15:09 ` Justin T. Gibbs
2002-10-24 13:45 ` Denis Vlasenko
2002-10-24 14:12 ` Denis Vlasenko
2002-10-24 16:54 ` Justin T. Gibbs
2002-10-25 10:45 ` Denis Vlasenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome