* [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration
@ 2023-12-12 18:54 Krzysztof Kozlowski
2023-12-13 9:02 ` neil.armstrong
2023-12-17 17:21 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-12 18:54 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski
The Qualcomm SM8550 RX Soundwire port configuration was taken from
downstream sources ("rx_frame_params_default"), but without two ports.
Correct the DTS, even though no practical impact was observed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Not adding fixes table, as I am not able to identify whether this was
actually a bug.
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 17c4f0a7638a..1f06fd33d1ce 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2109,18 +2109,18 @@ swr1: soundwire-controller@6ad0000 {
clock-names = "iface";
label = "RX";
- qcom,din-ports = <0>;
- qcom,dout-ports = <10>;
+ qcom,din-ports = <1>;
+ qcom,dout-ports = <11>;
- qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
- qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
- qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
- qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
- qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
--
2.34.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration
2023-12-12 18:54 [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration Krzysztof Kozlowski
@ 2023-12-13 9:02 ` neil.armstrong
2023-12-17 17:21 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: neil.armstrong @ 2023-12-13 9:02 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm,
devicetree, linux-kernel
On 12/12/2023 19:54, Krzysztof Kozlowski wrote:
> The Qualcomm SM8550 RX Soundwire port configuration was taken from
> downstream sources ("rx_frame_params_default"), but without two ports.
> Correct the DTS, even though no practical impact was observed.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Not adding fixes table, as I am not able to identify whether this was
> actually a bug.
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 17c4f0a7638a..1f06fd33d1ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2109,18 +2109,18 @@ swr1: soundwire-controller@6ad0000 {
> clock-names = "iface";
> label = "RX";
>
> - qcom,din-ports = <0>;
> - qcom,dout-ports = <10>;
> + qcom,din-ports = <1>;
> + qcom,dout-ports = <11>;
>
> - qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
> - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
> - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
> - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
> - qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
>
> #address-cells = <2>;
> #size-cells = <0>;
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration
2023-12-12 18:54 [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration Krzysztof Kozlowski
2023-12-13 9:02 ` neil.armstrong
@ 2023-12-17 17:21 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2023-12-17 17:21 UTC (permalink / raw)
To: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Krzysztof Kozlowski
On Tue, 12 Dec 2023 19:54:15 +0100, Krzysztof Kozlowski wrote:
> The Qualcomm SM8550 RX Soundwire port configuration was taken from
> downstream sources ("rx_frame_params_default"), but without two ports.
> Correct the DTS, even though no practical impact was observed.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration
commit: cf58c96c4f82cb09556e20a48ef93bdadf05b705
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-12-17 17:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-12 18:54 [PATCH] arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration Krzysztof Kozlowski
2023-12-13 9:02 ` neil.armstrong
2023-12-17 17:21 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®