Re: [PATCH v4 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6

[Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>]

> +struct q6usb_port_data {
> +	struct q6afe_usb_cfg usb_cfg;
> +	struct snd_soc_usb *usb;
> +	struct q6usb_offload priv;
> +	int active_idx;

what is an 'active_idx' ?


> +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, int card_idx,
> +			int connected)
> +{
> +	struct snd_soc_dapm_context *dapm;
> +	struct q6usb_port_data *data;
> +
> +	dapm = snd_soc_component_get_dapm(usb->component);
> +	data = dev_get_drvdata(usb->component->dev);

shouldn't you test that 'dapm' and 'data' are not NULL ?

> +
> +	if (connected) {

this goes back to my earlier comment that you treat 'connected' as a
boolean.

> +		snd_soc_dapm_enable_pin(dapm, "USB_RX_BE");
> +		/* We only track the latest USB headset plugged in */
> +		data->active_idx = card_idx;
> +	} else {
> +		snd_soc_dapm_disable_pin(dapm, "USB_RX_BE");
> +	}
> +	snd_soc_dapm_sync(dapm);
> +
> +	return 0;
> +}
> +
> +static int q6usb_component_probe(struct snd_soc_component *component)
> +{
> +	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
> +	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
> +
> +	snd_soc_dapm_disable_pin(dapm, "USB_RX_BE");
> +	snd_soc_dapm_sync(dapm);
> +
> +	data->usb = snd_soc_usb_add_port(component->dev, &data->priv, q6usb_alsa_connection_cb);
> +	if (IS_ERR(data->usb)) {
> +		dev_err(component->dev, "failed to add usb port\n");
> +		return -ENODEV;
> +	}
> +
> +	data->usb->component = component;
> +
> +	return 0;
> +}
> +
> +static const struct snd_soc_component_driver q6usb_dai_component = {
> +	.probe = q6usb_component_probe,

erm, if you have a .probe that adds a port, don't you need a remove that
removes the same port, and sets the pin state as well?

> +	.name = "q6usb-dai-component",
> +	.dapm_widgets = q6usb_dai_widgets,
> +	.num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
> +	.dapm_routes = q6usb_dapm_routes,
> +	.num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
> +	.of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
> +};
> +
> +static int q6usb_dai_dev_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct q6usb_port_data *data;
> +	struct device *dev = &pdev->dev;
> +	struct of_phandle_args args;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
> +				&data->priv.intr_num);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to read intr num.\n");
> +		return ret;
> +	}
> +
> +	ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
> +	if (ret < 0)
> +		data->priv.sid = -1;
> +	else
> +		data->priv.sid = args.args[0] & SID_MASK;
> +
> +	data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
> +
> +	data->priv.dev = dev;
> +	dev_set_drvdata(dev, data);
> +
> +	ret = devm_snd_soc_register_component(dev, &q6usb_dai_component,
> +					q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;

return devm_snd_soc_register_component

> +}
> +
> +static int q6usb_dai_dev_remove(struct platform_device *pdev)
> +{
> +	snd_soc_usb_remove_port(&pdev->dev);

that seems wrong, the port is added in the component probe, not the
platform device probe.

> +
> +	return 0;
> +}> +