From: Tanushree Shah <tshah@linux.ibm.com>
To: Matt Turner <mattst88@gmail.com>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
"Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
"Ritesh Harjani (IBM)" <ritesh.list@gmail.com>,
Shrikanth Hegde <sshegde@linux.ibm.com>,
Paul Mackerras <paulus@ozlabs.org>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/8] powerpc/perf: Use SIAR for sample addresses on 32-bit
Date: Tue, 17 Nov 2026 21:41:39 +0530 [thread overview]
Message-ID: <3950cc84-93bf-4830-8a37-57f9739a84b0@linux.ibm.com> (raw)
In-Reply-To: <20261109-ppc32-perf-v1-7-a6e8a55b3b48@gmail.com>
On 11/10/26 7:17 AM, Matt Turner wrote:
> On 32-bit, perf_read_regs() sets regs->result to 0, so regs_use_siar()
> is always false and every sample is attributed to the interrupted PC.
>
> The MPC7450 family's SIAR holds the address of the last instruction to
> complete before the performance monitor exception is generated
> (MPC7450UM Rev. 5, section 11.3.7). The exception can be generated
> with MSR[EE] = 0 and is taken once EE is set again (section 11.2), so
> when interrupts are disabled the interrupted PC is wherever they are
> re-enabled, while SIAR still points into the disabled region.
>
> On a 7448, sampling cycles system-wide with --intr-regs=nip during dd,
> perf bench sched pipe and find, 46% of the kernel samples have SIAR and
> the interrupted PC in different functions. 13270 samples have their PC
> on the instruction after the mtmsr that restores interrupts in
> ata_scsi_queuecmd(), and 11661 of those have SIAR in udelay().
>
> With interrupts enabled SIAR helps less. Sampling a 32-instruction
> loop with one store and one branch with -c 10007, 99.8% of the samples
> land at:
>
> event interrupted PC SIAR
> r122 (branches) br + 13 br + 9
> r014 (stores) stw + 21 stw + 17
>
> siar_valid() already returns true on 32-bit. Use SIAR for PMU
> exceptions, and take the user/kernel flags from it too. Move
> regs_use_siar() above the 32-bit block so that perf_get_misc_flags()
> can call it.
>
> Signed-off-by: Matt Turner <mattst88@gmail.com>
Hi Matt,
I checked the manual references (11.3.7 for SIAR and 11.2 for the
exception being taken only once EE is set), and they match the commit
message.
Infrastructure-wise this looks good to me.
One question: the callchain still walks from regs (gpr[1], link), but
its first entry now comes from SIAR. Can SIAR and the interrupted PC
end up on opposite sides of user/kernel? If so, would the callchain
be affected? Something like perf record -g on a workload that switches
between user and kernel often might show it.
Thanks
Tanushree Shah
> ---
> arch/powerpc/perf/core-book3s.c | 55 +++++++++++++++++++++++++++--------------
> 1 file changed, 36 insertions(+), 19 deletions(-)
>
> diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
> index 10ded865583c..e4c8ecddccbd 100644
> --- a/arch/powerpc/perf/core-book3s.c
> +++ b/arch/powerpc/perf/core-book3s.c
> @@ -75,6 +75,20 @@ static struct power_pmu *ppmu;
> */
> static unsigned int freeze_events_kernel = MMCR0_FCS;
>
> +static bool regs_use_siar(struct pt_regs *regs)
> +{
> + /*
> + * When we take a performance monitor exception the regs are setup
> + * using perf_read_regs() which overloads some fields, in particular
> + * regs->result to tell us whether to use SIAR.
> + *
> + * However if the regs are from another exception, eg. a syscall, then
> + * they have not been setup using perf_read_regs() and so regs->result
> + * is something random.
> + */
> + return ((TRAP(regs) == INTERRUPT_PERFMON) && regs->result);
> +}
> +
> /*
> * 32-bit doesn't have MMCRA but does have an MMCR2,
> * and a few other names are different.
> @@ -108,13 +122,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
> return 0;
> }
> static inline void perf_get_data_addr(struct perf_event *event, struct pt_regs *regs, u64 *addrp) { }
> -static inline u32 perf_get_misc_flags(struct pt_regs *regs)
> -{
> - return 0;
> -}
> +
> +/*
> + * The MPC7450 family's SIAR holds the address of the last instruction to
> + * complete before the performance monitor exception was generated, so for
> + * a PMU exception it is closer to the event than the interrupted PC.
> + */
> static inline void perf_read_regs(struct pt_regs *regs)
> {
> - regs->result = 0;
> + regs->result = 1;
> +}
> +
> +static inline u32 perf_get_misc_flags(struct pt_regs *regs)
> +{
> + unsigned long siar;
> +
> + if (!regs_use_siar(regs))
> + return 0;
> +
> + siar = mfspr(SPRN_SIAR);
> + if (!siar)
> + return 0;
> +
> + return is_kernel_addr(siar) ? PERF_RECORD_MISC_KERNEL :
> + PERF_RECORD_MISC_USER;
> }
>
> static inline int siar_valid(struct pt_regs *regs)
> @@ -163,20 +194,6 @@ unsigned long get_pmcs_ext_regs(int idx)
> return cpuhw->pmcs[idx];
> }
>
> -static bool regs_use_siar(struct pt_regs *regs)
> -{
> - /*
> - * When we take a performance monitor exception the regs are setup
> - * using perf_read_regs() which overloads some fields, in particular
> - * regs->result to tell us whether to use SIAR.
> - *
> - * However if the regs are from another exception, eg. a syscall, then
> - * they have not been setup using perf_read_regs() and so regs->result
> - * is something random.
> - */
> - return ((TRAP(regs) == INTERRUPT_PERFMON) && regs->result);
> -}
> -
> /*
> * Things that are specific to 64-bit implementations.
> */
>
next prev parent reply other threads:[~2026-11-17 16:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 1:46 [PATCH 0/8] powerpc/perf: mpc7450: Event fixes, SIAR sampling and sysfs event names Matt Turner
2026-11-10 1:47 ` [PATCH 1/8] powerpc/perf: mpc7450: Event 0x30d does not use the threshold Matt Turner
2026-11-13 17:38 ` Tanushree Shah
2026-11-10 1:47 ` [PATCH 2/8] powerpc/perf: mpc7450: Event 0x634 counts L2 prefetches, not L1I Matt Turner
2026-11-17 15:25 ` Tanushree Shah
2026-11-10 1:47 ` [PATCH 3/8] powerpc/perf: mpc7450: Remove the snoop retry alternatives Matt Turner
2026-11-17 15:28 ` Tanushree Shah
2026-11-10 1:47 ` [PATCH 4/8] powerpc/perf: mpc7450: Fill in the L1 data cache events Matt Turner
2026-11-17 15:36 ` Tanushree Shah
2026-11-10 1:47 ` [PATCH 5/8] powerpc/perf: mpc7450: Add the PMC6 L3 events to the alternatives table Matt Turner
2026-11-17 15:39 ` Tanushree Shah
2026-11-10 1:47 ` [PATCH 6/8] powerpc/perf: mpc7450: Export the event format in sysfs Matt Turner
2026-11-10 1:47 ` [PATCH 7/8] powerpc/perf: Use SIAR for sample addresses on 32-bit Matt Turner
2026-11-17 16:11 ` Tanushree Shah [this message]
2026-11-10 1:47 ` [PATCH 8/8] powerpc/perf: mpc7450: Export event names in sysfs Matt Turner
2026-11-17 16:17 ` Tanushree Shah
2026-11-10 1:55 ` [PATCH 0/8] powerpc/perf: mpc7450: Event fixes, SIAR sampling and sysfs event names Matt Turner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3950cc84-93bf-4830-8a37-57f9739a84b0@linux.ibm.com \
--to=tshah@linux.ibm.com \
--cc=chleroy@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mattst88@gmail.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@ozlabs.org \
--cc=ritesh.list@gmail.com \
--cc=sshegde@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®