Adaptec 2100S DPT I2O SmartRAID and 2.2/2.4

Adaptec 2100S DPT I2O SmartRAID and 2.2/2.4

[Jens Hjalmarsson]

Hello,

I have been looking around the internet for drivers for my RAID card. I
found drivers for 2.2, and a patch against "vanilla 2.2.x".
However, when trying to boot with that patch, I get an oops. (Got it to
work with 2.2.5.. rather old for me)
But, I want to run 2.4, and cannot find anything about this card and
kernel 2.4.

Can someone point me to a driver or a HOWTO so I can get this darn thing
to work?

Thanks,

Jens

(I am not a member of this list, so please contact me directly)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

RE: Adaptec 2100S DPT I2O SmartRAID and 2.2/2.4

[Doug Marcey]

I was looking around for the answer to this question and I only found this
question over and over again but not the answer.

So is there support for this adaptec 2100S raid card under 2.4.x? Is there a
reciepe?

Thank you in advance for any help.

			--Doug

-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org]On Behalf Of Jens Hjalmarsson
Sent: Saturday, February 10, 2001 3:13 AM
To: linux-kernel@vger.kernel.org
Subject: Adaptec 2100S DPT I2O SmartRAID and 2.2/2.4


Hello,

I have been looking around the internet for drivers for my RAID card. I
found drivers for 2.2, and a patch against "vanilla 2.2.x".
However, when trying to boot with that patch, I get an oops. (Got it to
work with 2.2.5.. rather old for me)
But, I want to run 2.4, and cannot find anything about this card and
kernel 2.4.

Can someone point me to a driver or a HOWTO so I can get this darn thing
to work?

Thanks,

Jens

(I am not a member of this list, so please contact me directly)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Adaptec 2100S DPT I2O SmartRAID and 2.2/2.4

[Steven Ellmore]

In fact, has anyone got it working under 2.2 (for any kernels later than 2.2.5)?

I'd like to get it to work with 2.2.16.  I'd be *delighted* if it worked with
2.4.x.

The OOPSes caused by the Adaptec driver are officially on my list of things to
look in to.....
......but so are many, many, many things.  :-(



Doug Marcey wrote:

>
> So is there support for this adaptec 2100S raid card under 2.4.x? Is there a
> reciepe?
>
> Thank you in advance for any help.
>