* Linux 2.2.19pre13 @ 2001-02-15 21:48 Alan Cox 2001-03-09 12:53 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti 0 siblings, 1 reply; 5+ messages in thread From: Alan Cox @ 2001-02-15 21:48 UTC (permalink / raw) To: linux-kernel This is mostly again to make sure everyone is in sync across the various ports and those that are fully merged all compile. Alan 2.2.19pre13 o Fix up missing bits of Soohoon Lee's exec patch (Michael Jaegerman) | not sure where some bits of it escaped too... o Revert serial driver locking patch (me) | Seems to be causing crashes o PPC BUG(), and other compile fixes needed (Benjamin Herrenschmidt) o ide_pmac_init to fix IDE probe power off (Benjamin Herrenschmidt) o atyfb128 and serial for pmac (Benjamin Herrenschmidt) o Workaround early imac firmware bug (Benjamin Herrenschmidt) o Ensure task is running in mm faults (Roger Larsson) | from 2.4 o Fix nfs cache bug (Neil Brown) o Further config.in cleanups/fixing (Andrzej Krzysztofowicz) o Clean up tulip changes remove accidental fix (Jeff Garzik) reversions o Update defconfig (Jeff Garzik) o Update usb printer driver in 2.2 to match 2.4 (Randy Dunlap) o Fix posix compliance on sockopts 2.2.19pre12 o Update the DAC960 driver (Leonard Zubkoff) o Small PPC fixes (Benjamin Herrenschmidt) o Document irda options config (Steven Cole) o Small isdn fixes/obsolete code removal (Kai Germaschewski) o Fix alpha kernel builds (Michal Jaegermann) o Update ver_linux to match the 2.4 one (Steven Cole) o AVM isdn driver updates (Carsten Paeth) o ISDN capi/ppp fixes (Kai Germaschewski) 2.2.19pre11 o Corrected version of ipc/shm.c fix (Christoph Rohland) o Update/cleanup starfire (Ion Badulescu) o Update isdn makefiles (Kai Germaschewski) o Eicon driver updates/new driver (Armin Schindler) | code o Hysdn driver (Werner Cornelius) o Hisax updates (Kai Germaschewski) 2.2.19pre10 o Update aic7xxx driver to 5.1.33 (Doug Ledford) o Revert shm change - its unsafe (Richard Nelson) o Update sunrpc code, add rpc ping congestion (Trond Myklebust) checks o Fix wrong kfree in cosa driver (Jan Kasprzak) o NFS client fixes (Trond Myklebust) o Better dcache/inode hashes (Dave Miller) o Fix missing skb->protocol init in AX.25 (Thomas Osterried) o EEpro100 reporting fix as per 2.4 (Ion Badulescu) o Starfire ethernet driver (Don Becker, Ion Badulescu, Jeff Garzik, ...) o Memory handling fixes for ISDN core code (Kai Germaschewski) o ISDN module locking fixes (Kai Germaschewski) o Fix ISDN modem profile reading (Kai Germaschewski) o Fix missing mark_bh calls in isdn (Kai Germaschewski) o Fix problems make xconfig has with config (Andrzej Krzysztofowicz) o Clean up isdn to user new __init etc (Kai Germaschewski) 2.2.19pre9 o Merge all the pending NFS server fixes (Neil Brown) o Neil becomes NFS server maintainer (Neil Brown) o Update to aic7xxx 5.1.32 (Doug Ledford) o Fix cs89x0 media selection (Frank Copeland) o Tidy APM stuff, make buggy bios selector tighter(Stephen Rothwell) o Fix i2o config typo (YOSHIMURA Keitaro) o Network updates, fix possible classifier hang (Dave Miller) o Sparc updates (nfs compat, syscalls) (Dave Miller) o Sparc watchdog driver (Eric Brower) o Remove experimental tag on QoS code (Dave Miller) o Move dumpable extra logic into binfmt avoiding (Solar Designer) other changes to arch code. Back out old stuff o Fix sysctl miscastings from signed/unsigned (Greg Kroah-Hartmann) o Alpha OSF syscall remove error printk o Don't trust IRQ routing on the ruffian ARC (Ivan Kokshaysky) 2.2.19pre8 o Add support for ICS1893 PHY to sis900 (L C Chang) o Fix typo in nautilus code (Tom Vier) o Clean up usb bandwidth messages (Randy Dunlap) o USB ACM loosen up end point rules (Randy Dunlap) o Fix tty module count corruptions (Maciej Rozycki) o i2o block updates (Boji Kannanthanam) o menuconfig updates (Kirk Reiser) o Fix dmi/apm ordering bug (Keith Owens, Neale Banks) o Alpha SMP build fix (Herbert Xu) o Fix igmp bugs (Stefan Jonsson) o Fix USB config.in problems (Greg Kroah-Hartmann) o Update Cort Dougan's info (Cort Dougan) o Update to 2.4.0 style A20 gate handler (Randy Dunlap) o Fix unneeded compat defines on S/390 ctc (Kurt Roeckx) o Macintosh HID driver fixes (Cort Dougan) o Fix ppc config/input layer and ksyms (Cort Dougan) o ISDN updates (Kai Germaschewski) o TGAfb as a module (Andrzej Krzysztofowicz) o Syscall table updates for sparc64 (Ben Collins) o 8139too driver updates (Jens David) o Tighten packet length checks in masq/tproxy (Julian Anastasov) o Fix udp port selection hang (Dave Miller) 2.2.19pre7 o Remove dead arm files (Russell King) o Fix VIA rhine build failure for a few folks (Peter Monta) o ARM ptrace fixes (Russell King) o Fix ymfpci setup for legacy devices (Pete Zaitcev) o xspeed dsl needs pci (Lars Holmberg) o Typo fix (Dave Miller) o Update ftdi usb serial driver (Greg Kroah-Hartmann) o Update keyspan usb serial drivers (Greg Kroah-Hartmann) o Sparc updates (Dave Miller) o Remove incorrect lp printk (Tim Waugh) o Fix ppa panic on timeout (Tim Waugh) o Maestro3 needs ac97 codec (Oleg Krivosheev) o Fix kwhich versus old bash (Pete Zaitcev) o Fix ip checksum compiler behaviour assumption (Dave Miller) o Fix real audio masq in presence of options (John Villalovos) o ne2k-pci version printing tweaks (J. Magallon) o Fix incorrect minors for some dasd devices as (Holger Smolinski) root o Fix alpha exception table printk (Andrzej Krzysztofowicz) o USB config updates (Greg Kroah-Hartmann) o USB audio driver updates (Greg Kroah-Hartmann) o Fix missing unlock_kernel in usbdev (Greg Kroah-Hartmann) o Update USB hid driver (Greg Kroah-Hartmann) o USB rio driver update (Greg Kroah-Hartmann) o Hopefully fix CyrixIII panic on boot (Ingo Oeser, H Peter Anvin) o Further CMOS lock fixes, move ioctls (Paul Gortmaker) o Dumpable should now work right again (Zack Weinberg, me) 2.2.19pre6 o Yamaha PCI sound updates (Pete Zaitcev) o Alpha SMP ASN reuse races (Andrea Arcangeli) o Alpha bottom half SMP race fixes (Andrea Arcangeli) o Alpha SMP read_unloc race fix (Andrea Arcangeli) o Show registers across CPUs on SMP alpha death (Andrea Arcangeli) o Print the 8K of stack not the top 4K on x86 (Andrea Arcangeli) o Dcache aging (Andrea Arcangeli) o Kill unused parameter in free_inode_memory (Andrea Arcangeli) 2.2.19pre5 o Fix dumpable stuff (Wolfgang Walter) o PPA driver update (Tim Waugh) o ARM updates (Russell - ptrace.c errored please (Russell King) resolve) o Fix NFS data alignment on ARM (Russell King) o Fix hang on boot with ALi5451 shared irq midi (Stephen Usher) o ESS Maestro 3 driver (Zach 'Fufu' Brown) o Belorussia/Ukraine NLS table (koi8-ru) (Andy Rysin) 2.2.19pre4 o Fixed duplicate info on the microcode driver (Daniel Rogers) o Update watchdog structs for nice user export (Eric Brower) o Update Documentation/devices.txt (H Peter Anvin) o Tweak sched.h to handle limit in Sparc (Andrea Arcangeli) 'make check_asm' o Move isdn pci definitions into pci.h (Kai Germaschewski) o Tidy init data/static vars in the isdn code (Kai Germaschewski) o Fix abuse of int for bitops in isdn (Kai Germaschewski) o Use named initializers on the AVM B1 (Kai Germaschewski) o Switch capi message length to unsigned (Kai Germaschewski) o ISDN updates (Kai Germaschewski) o Update microcode code to check features right (Tigran Aivazian) in 2.2 o E820 handling fixup (Andrea Arcangeli) o Fix ne2k-pci driver build bug (J.A. Magallon) o DC390 driver updates (Kurt Garloff) o Handle thinkpad E820 edx overwriting (Marc Joosen) o Update the osst driver to 0.8.6.1 (Kurt Garloff, Willem Riede) o Init the cmpci if compiled in (Raúl Núñez de Arenas Coronado) o ATP870U SCSI updates to fix disconnect bug (Wittman Li) o Clean up the usbdevfs backport (Dan Streetman) o Fix ATI rage makefiles (Brad Douglas) 2.2.19pre3 o Merge ADMtek-comet tulip support (Jim McQuillan) o Update microcode driver (Tigran Aivazian) o Merge Don Becker's NE2K full duplex support (Juan Lacarta) o Optimise kernel compiler detect, kgcc before (Peter Samuelson) gcc272 also o Fix compile combination problems (Arjan van de Ven) o Update via-rhine driver to include Don's changes(Urban Widmark) for VT6102 o Documentation updates (Tim Waugh) o Add ISDN PCI defines to pci.h (Kai Germaschewski) o Fix smb/fat handling for pre 1980 dates (Igor Zhbanov) o SyncLink updates (Paul Fulghum) o ICP vortex driver updates (Andreas Köpf) o mdacon clean up (Pavel Rabel) o Fix bugs in es1370/es1371/sonicvibes/solo1/ (Thomas Sailer) dabusb o Speed up x86 irq/fault paths by avoiding xchg (Mikael Pettersson) locked cycles (from Brian Gerst's 2.4test change) o Tighten up K6 check in bug tests (Mikael Pettersson) o Backport configure scripts bug fixes (Mikael Pettersson) o Fix duplicat help entries (Riley Williams) o Fix small asm bug in constant size uaccess (David Kutz) o Update ymfpci driver to handle legacy audio (Daisuke Nagano) o Remove ymfsb driver now no longer needed (Daisuke Nagano) o Add Empeg support to usb-serial (Gary Brubaker) o Fix e820 handling (Andrea Arcangeli) o Fix lanstreamer SMP locking (George Staikos) o Fix S/390 non SMP build (Kurt Roeckx) o Fix the PCI syscall on PowerMac (Benjamin Herrenschmidt) o Fix IPC_RMID behaviour (Christoph Rohland) o Fix NETCTL_GETFD on sparc64 (Dave Miller) o Tidy unneeded restore_flags/save sequence (Arnaldo Carvalho de Melo) on the ultrastor o Fix resource clean up on error in 89xo (Arnaldo Carvalho de Melo) driver o Update wireless headers (Jean Tourrilhes) o Fix non modular emu10k init (Mikael Pettersson) o Fix cpuid/msr driver crashes (Andrew Morton) o Write core files sparse (Christoph Rohland) o Merge the i810 tco (watchdog) timer (me) | original by Jeff Garzik 2.2.19pre2 o Drop the page aging for a moment to merge the Andrea VM o Merge Andrea's VM-global patch (Andrea Arcangeli) 2.2.19pre1 o Basic page aging (Neil Schemenauer) | This is a beginning to trying to get the VM right | Next stage is to go through Andrea's stuff and sort | it out the way I want it. o E820 memory detect backport from 2.4 (Michael Chen) o Fix cs46xx refusing to run on emachines400 (me) o Fix parport docs (Tim Waugh) o Fix USB serial name reporting (me) o Fix else warning in initio scsi (John Fort) o Fix incorrect timeout (that couldnt occur fortunately) in sched.c (Andrew Archibald) o Fix A20 fix credits (Christian Lademann) o Support for OnStream SC-x0 tape drives (Willem Riede, Kurt Garloff) o Intel 815 added to the AGPGART code (Robert M Love) o 3Ware scsi fixes (Arnaldo Carvalho de Melo) o Clean up scsi_init_malloc no mem case (Arnaldo Carvalho de Melo) o Fix dead module parameter in ip_masq_user.c (Keith Owens) o Switch max_files and friends to a struct to (Tigran Aivazian) be sure they stay together o Update microcode driver (Tigran Aivazian) o Fix free memory dereference in lance driver (Eli Carter) o ISOfs fixes (Andries Brouwer) o Watchdog driver for Advantech boards (Marek Michalkiewicz) o ISDN updates (Karsten Keil) o Docs fix (Pavel Rabel) o wake_one semantics for accept() (Andrew Morton) o Masquerade updates (Juanjo Ciarlante) o Add support for long serialnums on the Metricom (Alex Belits) o Onboard ethernet driver for the Intel 'Panther' (Ard van Breemen, boards Andries Brouwer) o VIA686a timer reset to 18Hz background (Vojtech Pavlik) o 3c527 driver rewrite (Richard Procter) | This supercedes my driver because | - it works for more people | - he has time to use his MCA box to debug it o Minix subpartition support (Anand Krishnamurthy Rajeev Pillai) o Remove unused() crap from DRM. You will need to hand load agp as well if needed (me) -- Alan Cox <alan@lxorguk.ukuu.org.uk> Red Hat Kernel Hacker & Linux 2.2 Maintainer Brainbench MVP for TCP/IP http://www.linux.org.uk/diary http://www.brainbench.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux 2.2.19pre16 - ip auto config problem 2001-02-15 21:48 Linux 2.2.19pre13 Alan Cox @ 2001-03-09 12:53 ` davide.rossetti 2001-03-09 13:26 ` SMP and non-SMP modules John O'Connor 2001-03-09 20:01 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti 0 siblings, 2 replies; 5+ messages in thread From: davide.rossetti @ 2001-03-09 12:53 UTC (permalink / raw) To: linux-kernel, Alan Cox Hi folks, after a long time, I tried to upgrade the kernel I use to boot some diskless PIII Katmai, C-PCI hosts (attached lspci -vv) with DEC ethernet chips. I had trouble to use "IP auto configure" feature... It seems like it is skipped; even more, net/core/dev.c:net_dev_init() call by drivers/block/genhd.c:device_setup() is never called. I remember that: 1) the IDE hd scan was done, with no devices found (it is diskless:-) 2) the net device driver was started, and it found 2 DEC chips but a few lines later NFS root couldn't be mounted as no NFS server was set... anyway I had activated debug stuff in ipconfig.c and put a lot of printk/console_print in dev.c and none of them was displayed so I guess that code was never called actually. then I added a bunch of printk/console_print in device_setup(), especially before blk_dev_init ------------------------------------------- #ifdef CONFIG_PARPORT parport_init(); #endif chr_dev_init(); console_print("before blk_dev_init()\n"); blk_dev_init(); sti(); #ifdef CONFIG_I2O i2o_init(); #endif #ifdef CONFIG_BLK_DEV_DAC960 DAC960_Initialize(); #endif #ifdef CONFIG_FC4_SOC /* This has to be done before scsi_dev_init */ soc_probe(); #endif #ifdef CONFIG_SCSI console_print("before scsi_dev_init()\n"); scsi_dev_init(); #endif #ifdef CONFIG_BLK_CPQ_DA cpqarray_init(); #endif #ifdef CONFIG_BLK_CPQ_CISS_DA cciss_init(); #endif #ifdef CONFIG_NET console_print("before net_dev_init()\n"); net_dev_init(); #endif ------------------------------------------------ (I used console_print as I was scared it could mess with irq by the sti() code...) and all of a sudded it was all ok, I got all the printk/console_print...etc. I got NFS root mounting... everything OK! hope it is useful to you. ciao -- +------------------------------------------------------------------+ |Rossetti Davide INFN - Sezione Roma I - gruppo V, prog. APEmille| | web : http://apegate.roma1.infn.it/~rossetti | | """"" E-mail : davide.rossetti@roma1.infn.it | | |o o| phone : (+39)-06-49914412 | |--o00O-O00o-- fax : (+39)-06-49914423 (+39)-06-4957697 | | address: Dipartimento di Fisica (V.E.) | | Universita' di Roma "La Sapienza" | | P.le Aldo Moro,5 I - 00185 Roma - Italy| | gnupg pub. key: http://apegate.roma1.infn.it/~rossetti/gnupg.txt| | | |"Outside of a dog,a book is a man's best friend. Inside of a dog, | | it's too dark to read." - Groucho Marx | +------------------------------------------------------------------+ ^ permalink raw reply [flat|nested] 5+ messages in thread
* SMP and non-SMP modules 2001-03-09 12:53 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti @ 2001-03-09 13:26 ` John O'Connor 2001-03-09 15:22 ` rui.sousa 2001-03-09 20:01 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti 1 sibling, 1 reply; 5+ messages in thread From: John O'Connor @ 2001-03-09 13:26 UTC (permalink / raw) To: linux-kernel What is the difference between an SMP and a non-SMP module? I have a module that works fine on 2.2.14 and I want to make it run on another distribution that uses a 2.2.16-SMP kernel. What changes will be needed? Thanks John O'Connor ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: SMP and non-SMP modules 2001-03-09 13:26 ` SMP and non-SMP modules John O'Connor @ 2001-03-09 15:22 ` rui.sousa 0 siblings, 0 replies; 5+ messages in thread From: rui.sousa @ 2001-03-09 15:22 UTC (permalink / raw) To: John O'Connor; +Cc: linux-kernel On Fri, 9 Mar 2001, John O'Connor wrote: > What is the difference between an SMP and a non-SMP module? > > I have a module that works fine on 2.2.14 and I want to make it run on another distribution that uses a 2.2.16-SMP kernel. > > What changes will be needed? You will need at least to recompile the module against the new kernel. Rui Sousa ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Linux 2.2.19pre16 - ip auto config problem 2001-03-09 12:53 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti 2001-03-09 13:26 ` SMP and non-SMP modules John O'Connor @ 2001-03-09 20:01 ` davide.rossetti 1 sibling, 0 replies; 5+ messages in thread From: davide.rossetti @ 2001-03-09 20:01 UTC (permalink / raw) To: linux-kernel, Alan Cox [-- Attachment #1: Type: TEXT/PLAIN, Size: 1232 bytes --] On Fri, 9 Mar 2001, davide.rossetti wrote: > Hi folks, > after a long time, I tried to upgrade the kernel I use to boot some > diskless PIII Katmai, C-PCI hosts (attached lspci -vv) with DEC ethernet > chips. sorry. forgot to attach the pci dev dump. regards -- +------------------------------------------------------------------+ |Rossetti Davide INFN - Sezione Roma I - gruppo V, prog. APEmille| | web : http://apegate.roma1.infn.it/~rossetti | | """"" E-mail : davide.rossetti@roma1.infn.it | | |o o| phone : (+39)-06-49914412 | |--o00O-O00o-- fax : (+39)-06-49914423 (+39)-06-4957697 | | address: Dipartimento di Fisica (V.E.) | | Universita' di Roma "La Sapienza" | | P.le Aldo Moro,5 I - 00185 Roma - Italy| | gnupg pub. key: http://apegate.roma1.infn.it/~rossetti/gnupg.txt| | | |"Outside of a dog,a book is a man's best friend. Inside of a dog, | | it's too dark to read." - Groucho Marx | +------------------------------------------------------------------+ [-- Attachment #2: Type: TEXT/PLAIN, Size: 7321 bytes --] 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at f8000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 1.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: f0100000-f3ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ 00:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 165 (5000ns min, 10000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1080 Region 1: Memory at f0000000 (32-bit, non-prefetchable) 00:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 165 (5000ns min, 10000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 1400 Region 1: Memory at f0000400 (32-bit, non-prefetchable) 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 1050 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1060 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=02, subordinate=02, sec-latency=68 Memory behind bridge: f4000000-f40fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=03, subordinate=03, sec-latency=68 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 01:00.0 VGA compatible controller: Cirrus Logic GD 5465 [Laguna] (rev 03) (prog-if 00 [VGA]) Subsystem: Cirrus Logic GD 5465 [Laguna] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (4000ns min, 4000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2000000 (32-bit, non-prefetchable) Region 1: Memory at f0100000 (32-bit, non-prefetchable) Capabilities: [80] AGP version 1.0 Status: RQ=0 SBA- 64bit- FW- Rate=<none> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 02:09.0 IRDA controller: Unknown device aaaa:6666 (rev 01) Subsystem: Technical Corp.: Unknown device abcd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f4080000 (32-bit, non-prefetchable) 02:0c.0 Multimedia video controller: Unknown device aaaa:5555 (rev 01) Subsystem: Technical Corp.: Unknown device abcd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4000000 (32-bit, non-prefetchable) 02:0d.0 Multimedia video controller: Unknown device aaaa:5555 (rev 01) Subsystem: Technical Corp.: Unknown device abcd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 64 (8000ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f4020000 (32-bit, non-prefetchable) 02:0e.0 Multimedia video controller: Unknown device aaaa:5555 (rev 01) Subsystem: Technical Corp.: Unknown device abcd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 64 (8000ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at f4040000 (32-bit, non-prefetchable) 02:0f.0 Multimedia video controller: Unknown device aaaa:5555 (rev 01) Subsystem: Technical Corp.: Unknown device abcd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at f4060000 (32-bit, non-prefetchable) ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2001-03-09 20:04 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-02-15 21:48 Linux 2.2.19pre13 Alan Cox 2001-03-09 12:53 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti 2001-03-09 13:26 ` SMP and non-SMP modules John O'Connor 2001-03-09 15:22 ` rui.sousa 2001-03-09 20:01 ` Linux 2.2.19pre16 - ip auto config problem davide.rossetti
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®