mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marcel Holtmann <marcel@holtmann.org>
To: Archie Pusaka <apusaka@google.com>
Cc: linux-bluetooth <linux-bluetooth@vger.kernel.org>,
	CrosBT Upstreaming <chromeos-bluetooth-upstreaming@chromium.org>,
	Archie Pusaka <apusaka@chromium.org>,
	Abhishek Pandit-Subedi <abhishekpandit@chromium.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Bluetooth: hci_h5: Add RTL8822CS capabilities
Date: Thu, 20 May 2021 17:18:02 +0200	[thread overview]
Message-ID: <3DB375AF-3BC3-43F3-A1F5-1E3CBF17318D@holtmann.org> (raw)
In-Reply-To: <CAJQfnxG1ba=imd_BiOXpuT8WF8HeWPcs5y4kdKx+fV6LEL9SyA@mail.gmail.com>

Hi Archie,

>>>>>> RTL8822 chipset supports WBS, and this information is conveyed in
>>>>>> btusb.c. However, the UART driver doesn't have this information just
>>>>>> yet.
>>>>>> 
>>>>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org>
>>>>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
>>>>>> ---
>>>>>> 
>>>>>> drivers/bluetooth/btrtl.c  | 26 ++++++++++++++++----------
>>>>>> drivers/bluetooth/btrtl.h  |  2 ++
>>>>>> drivers/bluetooth/hci_h5.c |  5 +----
>>>>>> 3 files changed, 19 insertions(+), 14 deletions(-)
>>>>>> 
>>>>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
>>>>>> index e7fe5fb22753..988a09860c6b 100644
>>>>>> --- a/drivers/bluetooth/btrtl.c
>>>>>> +++ b/drivers/bluetooth/btrtl.c
>>>>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev,
>>>>>> }
>>>>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware);
>>>>>> 
>>>>>> -int btrtl_setup_realtek(struct hci_dev *hdev)
>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
>>>>>> {
>>>>>> -     struct btrtl_device_info *btrtl_dev;
>>>>>> -     int ret;
>>>>>> -
>>>>>> -     btrtl_dev = btrtl_initialize(hdev, NULL);
>>>>>> -     if (IS_ERR(btrtl_dev))
>>>>>> -             return PTR_ERR(btrtl_dev);
>>>>>> -
>>>>>> -     ret = btrtl_download_firmware(hdev, btrtl_dev);
>>>>>> -
>>>>>>     /* Enable controller to do both LE scan and BR/EDR inquiry
>>>>>>      * simultaneously.
>>>>>>      */
>>>>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
>>>>>>             rtl_dev_dbg(hdev, "WBS supported not enabled.");
>>>>>>             break;
>>>>>>     }
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks);
>>>>>> +
>>>>>> +int btrtl_setup_realtek(struct hci_dev *hdev)
>>>>>> +{
>>>>>> +     struct btrtl_device_info *btrtl_dev;
>>>>>> +     int ret;
>>>>>> +
>>>>>> +     btrtl_dev = btrtl_initialize(hdev, NULL);
>>>>>> +     if (IS_ERR(btrtl_dev))
>>>>>> +             return PTR_ERR(btrtl_dev);
>>>>>> +
>>>>>> +     ret = btrtl_download_firmware(hdev, btrtl_dev);
>>>>>> +
>>>>>> +     btrtl_set_quirks(hdev, btrtl_dev);
>>>>>> 
>>>>>>     btrtl_free(btrtl_dev);
>>>>>>     return ret;
>>>>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
>>>>>> index 2a582682136d..260167f01b08 100644
>>>>>> --- a/drivers/bluetooth/btrtl.h
>>>>>> +++ b/drivers/bluetooth/btrtl.h
>>>>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
>>>>>> void btrtl_free(struct btrtl_device_info *btrtl_dev);
>>>>>> int btrtl_download_firmware(struct hci_dev *hdev,
>>>>>>                         struct btrtl_device_info *btrtl_dev);
>>>>>> +void btrtl_set_quirks(struct hci_dev *hdev,
>>>>>> +                   struct btrtl_device_info *btrtl_dev);
>>>>>> int btrtl_setup_realtek(struct hci_dev *hdev);
>>>>>> int btrtl_shutdown_realtek(struct hci_dev *hdev);
>>>>>> int btrtl_get_uart_settings(struct hci_dev *hdev,
>>>>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
>>>>>> index 27e96681d583..e0520639f4ba 100644
>>>>>> --- a/drivers/bluetooth/hci_h5.c
>>>>>> +++ b/drivers/bluetooth/hci_h5.c
>>>>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5)
>>>>>>     /* Give the device some time before the hci-core sends it a reset */
>>>>>>     usleep_range(10000, 20000);
>>>>>> 
>>>>>> -     /* Enable controller to do both LE scan and BR/EDR inquiry
>>>>>> -      * simultaneously.
>>>>>> -      */
>>>>>> -     set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
>>>>>> +     btrtl_set_quirks(h5->hu->hdev, btrtl_dev);
>>>>> 
>>>>> any reason why not just setting WBS quirk here?
>>>> 
>>>> Hmm, I think WBS is the feature of the chipset and not the transport.
>>>> Therefore isn't it better to just have it set in one place?
>>>> Setting the quirks here means we need to copy paste the settings from btrtl.c.
>>> 
>>> but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference.
>> 
>> Sorry, I don't get what you mean.
>> With this patch I also moved HCI_QUIRK_SIMULTANEOUS_DISCOVERY into
>> btrtl.c, so it's together with the WBS quirk.
>> 
>>> Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling.
>> 
>> To be honest, I am not aware about the story of the broken erroneous
>> packet flag.
>> Last time I checked I still needed the quirk to have RTL8822 on UART
>> properly run WBS, but that was months ago...
>> Let me verify whether this quirk is still needed.
> 
> It looks like we still need the WBS quirk because otherwise the host
> wouldn't know whether the controller supports WBS or not. It's used in
> get_supported_settings() in mgmt.c.

and why not set it unconditionally for all Realtek chips?

Regards

Marcel


  parent reply	other threads:[~2021-05-20 15:18 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-13  8:54 Archie Pusaka
2021-05-13 15:14 ` Marcel Holtmann
2021-05-13 16:32   ` Archie Pusaka
2021-05-13 19:03     ` Marcel Holtmann
2021-05-14 11:40       ` Archie Pusaka
2021-05-17  4:31         ` Archie Pusaka
2021-05-20  4:45           ` Archie Pusaka
2021-05-20 15:18           ` Marcel Holtmann [this message]
2021-05-20 16:02             ` Archie Pusaka
2021-05-26  5:49               ` Archie Pusaka
2021-05-26 14:59                 ` Marcel Holtmann
2021-05-27  7:05                   ` Archie Pusaka
2021-05-27 15:13                     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3DB375AF-3BC3-43F3-A1F5-1E3CBF17318D@holtmann.org \
    --to=marcel@holtmann.org \
    --cc=abhishekpandit@chromium.org \
    --cc=apusaka@chromium.org \
    --cc=apusaka@google.com \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®