mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marcel Holtmann <marcel@holtmann.org>
To: Archie Pusaka <apusaka@google.com>
Cc: linux-bluetooth <linux-bluetooth@vger.kernel.org>,
	CrosBT Upstreaming <chromeos-bluetooth-upstreaming@chromium.org>,
	Archie Pusaka <apusaka@chromium.org>,
	Abhishek Pandit-Subedi <abhishekpandit@chromium.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Bluetooth: hci_h5: Add RTL8822CS capabilities
Date: Thu, 13 May 2021 21:03:41 +0200	[thread overview]
Message-ID: <DAE03499-573B-4A72-A2A9-2E139B78AB2E@holtmann.org> (raw)
In-Reply-To: <CAJQfnxE4PY09GpxGYLKy2kXnaCQaUmCakhCKnhqGnoK+9aSyyg@mail.gmail.com>

Hi Archie,

>>> RTL8822 chipset supports WBS, and this information is conveyed in
>>> btusb.c. However, the UART driver doesn't have this information just
>>> yet.
>>> 
>>> Signed-off-by: Archie Pusaka <apusaka@chromium.org>
>>> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
>>> ---
>>> 
>>> drivers/bluetooth/btrtl.c  | 26 ++++++++++++++++----------
>>> drivers/bluetooth/btrtl.h  |  2 ++
>>> drivers/bluetooth/hci_h5.c |  5 +----
>>> 3 files changed, 19 insertions(+), 14 deletions(-)
>>> 
>>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
>>> index e7fe5fb22753..988a09860c6b 100644
>>> --- a/drivers/bluetooth/btrtl.c
>>> +++ b/drivers/bluetooth/btrtl.c
>>> @@ -719,17 +719,8 @@ int btrtl_download_firmware(struct hci_dev *hdev,
>>> }
>>> EXPORT_SYMBOL_GPL(btrtl_download_firmware);
>>> 
>>> -int btrtl_setup_realtek(struct hci_dev *hdev)
>>> +void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
>>> {
>>> -     struct btrtl_device_info *btrtl_dev;
>>> -     int ret;
>>> -
>>> -     btrtl_dev = btrtl_initialize(hdev, NULL);
>>> -     if (IS_ERR(btrtl_dev))
>>> -             return PTR_ERR(btrtl_dev);
>>> -
>>> -     ret = btrtl_download_firmware(hdev, btrtl_dev);
>>> -
>>>      /* Enable controller to do both LE scan and BR/EDR inquiry
>>>       * simultaneously.
>>>       */
>>> @@ -750,6 +741,21 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
>>>              rtl_dev_dbg(hdev, "WBS supported not enabled.");
>>>              break;
>>>      }
>>> +}
>>> +EXPORT_SYMBOL_GPL(btrtl_set_quirks);
>>> +
>>> +int btrtl_setup_realtek(struct hci_dev *hdev)
>>> +{
>>> +     struct btrtl_device_info *btrtl_dev;
>>> +     int ret;
>>> +
>>> +     btrtl_dev = btrtl_initialize(hdev, NULL);
>>> +     if (IS_ERR(btrtl_dev))
>>> +             return PTR_ERR(btrtl_dev);
>>> +
>>> +     ret = btrtl_download_firmware(hdev, btrtl_dev);
>>> +
>>> +     btrtl_set_quirks(hdev, btrtl_dev);
>>> 
>>>      btrtl_free(btrtl_dev);
>>>      return ret;
>>> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
>>> index 2a582682136d..260167f01b08 100644
>>> --- a/drivers/bluetooth/btrtl.h
>>> +++ b/drivers/bluetooth/btrtl.h
>>> @@ -54,6 +54,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
>>> void btrtl_free(struct btrtl_device_info *btrtl_dev);
>>> int btrtl_download_firmware(struct hci_dev *hdev,
>>>                          struct btrtl_device_info *btrtl_dev);
>>> +void btrtl_set_quirks(struct hci_dev *hdev,
>>> +                   struct btrtl_device_info *btrtl_dev);
>>> int btrtl_setup_realtek(struct hci_dev *hdev);
>>> int btrtl_shutdown_realtek(struct hci_dev *hdev);
>>> int btrtl_get_uart_settings(struct hci_dev *hdev,
>>> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
>>> index 27e96681d583..e0520639f4ba 100644
>>> --- a/drivers/bluetooth/hci_h5.c
>>> +++ b/drivers/bluetooth/hci_h5.c
>>> @@ -906,10 +906,7 @@ static int h5_btrtl_setup(struct h5 *h5)
>>>      /* Give the device some time before the hci-core sends it a reset */
>>>      usleep_range(10000, 20000);
>>> 
>>> -     /* Enable controller to do both LE scan and BR/EDR inquiry
>>> -      * simultaneously.
>>> -      */
>>> -     set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
>>> +     btrtl_set_quirks(h5->hu->hdev, btrtl_dev);
>> 
>> any reason why not just setting WBS quirk here?
> 
> Hmm, I think WBS is the feature of the chipset and not the transport.
> Therefore isn't it better to just have it set in one place?
> Setting the quirks here means we need to copy paste the settings from btrtl.c.

but since you are already setting HCI_QUIRK_SIMULTANEOUS_DISCOVERY right now, I don’t see the difference.

Can we actually verify that we still need the WBS quirk. I think we fixed the broken errerrnous packet flag handling.

Regards

Marcel


  reply	other threads:[~2021-05-13 19:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-13  8:54 Archie Pusaka
2021-05-13 15:14 ` Marcel Holtmann
2021-05-13 16:32   ` Archie Pusaka
2021-05-13 19:03     ` Marcel Holtmann [this message]
2021-05-14 11:40       ` Archie Pusaka
2021-05-17  4:31         ` Archie Pusaka
2021-05-20  4:45           ` Archie Pusaka
2021-05-20 15:18           ` Marcel Holtmann
2021-05-20 16:02             ` Archie Pusaka
2021-05-26  5:49               ` Archie Pusaka
2021-05-26 14:59                 ` Marcel Holtmann
2021-05-27  7:05                   ` Archie Pusaka
2021-05-27 15:13                     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DAE03499-573B-4A72-A2A9-2E139B78AB2E@holtmann.org \
    --to=marcel@holtmann.org \
    --cc=abhishekpandit@chromium.org \
    --cc=apusaka@chromium.org \
    --cc=apusaka@google.com \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®