[PATCH, CFT] remove cli from 3c527

[PATCH, CFT] remove cli from 3c527

[Manfred Spraul]

[-- Attachment #1: Type: text/plain, Size: 345 bytes --]

Hi,

attached is a cleanup for the 3c527 driver: cli is gone, the driver must 
be converted to use a spinlock. I wrote it some time ago, but didn't 
send to Linus due to lack of hardware to test.

Anyone around who has the hardware and could make a quick test run? 
Preferable without CONFIG_SMP and with CONFIG_DEBUG_SPINLOCK.

--
    Manfred


[-- Attachment #2: patch-3c527 --]
[-- Type: text/plain, Size: 2159 bytes --]

--- 2.6/drivers/net/3c527.c	2003-06-17 06:20:03.000000000 +0200
+++ build-2.6/drivers/net/3c527.c	2003-08-31 19:26:37.000000000 +0200
@@ -100,6 +100,7 @@
 #include <linux/string.h>
 #include <linux/wait.h>
 #include <linux/ethtool.h>
+#include <linux/spinlock.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -179,6 +180,7 @@
 	u16 tx_ring_head;       /* index to tx en-queue end */
 
 	u16 rx_ring_tail;       /* index to rx de-queue end */ 
+	spinlock_t lock;
 };
 
 /* The station (ethernet) address prefix, used for a sanity check. */
@@ -579,6 +581,27 @@
 	return 0;
 }
 
+/**
+ *	wait_exec_pending - sleep until exec_pending reaches a certain value
+ *	@lp: m32_local structure describing the target card
+ *	@value: value to wait for
+ *
+ *	The caller must acquire lp->lock before calling this function, it
+ *	temporarily drops the lock when it sleeps.
+ */
+
+static void wait_exec_pending(struct mc32_local *lp, int value)
+{
+	while (lp->exec_pending != value) {
+	        DEFINE_WAIT(wait);
+
+	        prepare_to_wait(&lp->event, &wait, TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&lp->lock);
+	        schedule();
+	        finish_wait(&lp->event, &wait);
+		spin_lock_irq(&lp->lock);
+	}
+}
 
 /**
  *	mc32_command	-	send a command and sleep until completion
@@ -619,14 +642,11 @@
 	int ret = 0;
 	
 	/*
-	 *	Wait for a command
+	 *	Wait until there are no more pending commands
 	 */
 	 
-	save_flags(flags);
-	cli();
-	 
-	while(lp->exec_pending)
-		sleep_on(&lp->event);
+	spin_lock_irqsave(&lp->lock, flags);
+	wait_exec_pending(lp, 0);
 		
 	/*
 	 *	Issue mine
@@ -634,7 +654,7 @@
 
 	lp->exec_pending=1;
 	
-	restore_flags(flags);
+	spin_unlock_irqrestore(&lp->lock, flags);
 	
 	lp->exec_box->mbox=0;
 	lp->exec_box->mbox=cmd;
@@ -645,13 +665,10 @@
 	while(!(inb(ioaddr+HOST_STATUS)&HOST_STATUS_CRR));
 	outb(1<<6, ioaddr+HOST_CMD);	
 
-	save_flags(flags);
-	cli();
-
-	while(lp->exec_pending!=2)
-		sleep_on(&lp->event);
+	spin_lock_irqsave(&lp->lock, flags);
+	wait_exec_pending(lp, 2);
 	lp->exec_pending=0;
-	restore_flags(flags);
+	spin_unlock_irqrestore(&lp->lock, flags);
 	
 	if(lp->exec_box->mbox&(1<<13))
 		ret = -1;