From: Gavin Shan <gshan@redhat.com>
To: Ben Horgan <ben.horgan@arm.com>
Cc: amitsinght@marvell.com, baisheng.gao@unisoc.com,
baolin.wang@linux.alibaba.com, carl@os.amperecomputing.com,
dave.martin@arm.com, david@kernel.org, dfustini@baylibre.com,
fenghuay@nvidia.com, james.morse@arm.com,
jonathan.cameron@huawei.com, kobak@nvidia.com,
lcherian@marvell.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, peternewman@google.com,
punit.agrawal@oss.qualcomm.com, quic_jiles@quicinc.com,
reinette.chatre@intel.com, rohit.mathew@arm.com,
scott@os.amperecomputing.com, sdonthineni@nvidia.com,
tan.shaopeng@fujitsu.com, xhao@linux.alibaba.com,
catalin.marinas@arm.com, will@kernel.org, corbet@lwn.net,
maz@kernel.org, oupton@kernel.org, joey.gouly@arm.com,
suzuki.poulose@arm.com, kvmarm@lists.linux.dev,
zengheng4@huawei.com, linux-doc@vger.kernel.org,
Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Subject: Re: [PATCH v6 25/40] arm_mpam: resctrl: Add support for 'MB' resource
Date: Tue, 24 Mar 2026 09:09:20 +1000 [thread overview]
Message-ID: <3ae3356d-a901-4b71-90df-557d468e4785@redhat.com> (raw)
In-Reply-To: <20260313144617.3420416-26-ben.horgan@arm.com>
Hi Ben,
On 3/14/26 12:46 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
>
> resctrl supports 'MB', as a percentage throttling of traffic from the
> L3. This is the control that mba_sc uses, so ideally the class chosen
> should be as close as possible to the counters used for mbm_total. If there
> is a single L3, it's the last cache, and the topology of the memory matches
> then the traffic at the memory controller will be equivalent to that at
> egress of the L3. If these conditions are met allow the memory class to
> back MB.
>
> MB's percentage control should be backed either with the fixed point
> fraction MBW_MAX or bandwidth portion bitmaps. The bandwidth portion
> bitmaps is not used as its tricky to pick which bits to use to avoid
> contention, and may be possible to expose this as something other than a
> percentage in the future.
>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
> Reviewed-by: Zeng Heng <zengheng4@huawei.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Co-developed-by: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v2:
> Code flow change
> Commit message 'or'
>
> Changes since v3:
> initialise tmp_cpumask
> update commit message
> check the traffic matches l3
> update comment on candidate_class update, only mbm_total
> drop tags due to rework
>
> Changes since v4:
> Move __free declarations to point of first use
> New line for a '{'
> set r->alloc_capable last (Reinette)
>
> Changes since v5:
> Mention L3 needs to be the last cache in commit message
> Consider memory side caches and numa nodes
> ---
> drivers/resctrl/mpam_resctrl.c | 287 ++++++++++++++++++++++++++++++++-
> 1 file changed, 286 insertions(+), 1 deletion(-)
>
One comment below and it deserves to be addressed if we have another respin:
Reviewed-by: Gavin Shan <gshan@redhat.com>
> diff --git a/drivers/resctrl/mpam_resctrl.c b/drivers/resctrl/mpam_resctrl.c
> index 93c8a9608ed4..cad65cf7d12d 100644
> --- a/drivers/resctrl/mpam_resctrl.c
> +++ b/drivers/resctrl/mpam_resctrl.c
> @@ -267,6 +267,33 @@ static bool cache_has_usable_cpor(struct mpam_class *class)
> return class->props.cpbm_wd <= 32;
> }
>
> +static bool mba_class_use_mbw_max(struct mpam_props *cprops)
> +{
> + return (mpam_has_feature(mpam_feat_mbw_max, cprops) &&
> + cprops->bwa_wd);
> +}
> +
> +static bool class_has_usable_mba(struct mpam_props *cprops)
> +{
> + return mba_class_use_mbw_max(cprops);
> +}
> +
> +/*
> + * Calculate the worst-case percentage change from each implemented step
> + * in the control.
> + */
> +static u32 get_mba_granularity(struct mpam_props *cprops)
> +{
> + if (!mba_class_use_mbw_max(cprops))
> + return 0;
> +
> + /*
> + * bwa_wd is the number of bits implemented in the 0.xxx
> + * fixed point fraction. 1 bit is 50%, 2 is 25% etc.
> + */
> + return DIV_ROUND_UP(MAX_MBA_BW, 1 << cprops->bwa_wd);
> +}
> +
> /*
> * Each fixed-point hardware value architecturally represents a range
> * of values: the full range 0% - 100% is split contiguously into
> @@ -317,6 +344,166 @@ static u16 percent_to_mbw_max(u8 pc, struct mpam_props *cprops)
> return val;
> }
>
> +static u32 get_mba_min(struct mpam_props *cprops)
> +{
> + if (!mba_class_use_mbw_max(cprops)) {
> + WARN_ON_ONCE(1);
> + return 0;
> + }
> +
> + return mbw_max_to_percent(0, cprops);
> +}
> +
> +/* Find the L3 cache that has affinity with this CPU */
> +static int find_l3_equivalent_bitmask(int cpu, cpumask_var_t tmp_cpumask)
> +{
> + u32 cache_id = get_cpu_cacheinfo_id(cpu, 3);
> +
> + lockdep_assert_cpus_held();
> +
> + return mpam_get_cpumask_from_cache_id(cache_id, 3, tmp_cpumask);
> +}
> +
> +/*
> + * topology_matches_l3() - Is the provided class the same shape as L3
> + * @victim: The class we'd like to pretend is L3.
> + *
> + * resctrl expects all the world's a Xeon, and all counters are on the
> + * L3. We allow some mapping counters on other classes. This requires
> + * that the CPU->domain mapping is the same kind of shape.
> + *
> + * Using cacheinfo directly would make this work even if resctrl can't
> + * use the L3 - but cacheinfo can't tell us anything about offline CPUs.
> + * Using the L3 resctrl domain list also depends on CPUs being online.
> + * Using the mpam_class we picked for L3 so we can use its domain list
> + * assumes that there are MPAM controls on the L3.
> + * Instead, this path eventually uses the mpam_get_cpumask_from_cache_id()
> + * helper which can tell us about offline CPUs ... but getting the cache_id
> + * to start with relies on at least one CPU per L3 cache being online at
> + * boot.
> + *
> + * Walk the victim component list and compare the affinity mask with the
> + * corresponding L3. The topology matches if each victim:component's affinity
> + * mask is the same as the CPU's corresponding L3's. These lists/masks are
> + * computed from firmware tables so don't change at runtime.
> + */
> +static bool topology_matches_l3(struct mpam_class *victim)
> +{
> + int cpu, err;
> + struct mpam_component *victim_iter;
> +
> + lockdep_assert_cpus_held();
> +
> + cpumask_var_t __free(free_cpumask_var) tmp_cpumask = CPUMASK_VAR_NULL;
> + if (!alloc_cpumask_var(&tmp_cpumask, GFP_KERNEL))
> + return false;
> +
> + guard(srcu)(&mpam_srcu);
> + list_for_each_entry_srcu(victim_iter, &victim->components, class_list,
> + srcu_read_lock_held(&mpam_srcu)) {
> + if (cpumask_empty(&victim_iter->affinity)) {
> + pr_debug("class %u has CPU-less component %u - can't match L3!\n",
> + victim->level, victim_iter->comp_id);
> + return false;
> + }
> +
> + cpu = cpumask_any_and(&victim_iter->affinity, cpu_online_mask);
> + if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
> + return false;
> +
> + cpumask_clear(tmp_cpumask);
> + err = find_l3_equivalent_bitmask(cpu, tmp_cpumask);
> + if (err) {
> + pr_debug("Failed to find L3's equivalent component to class %u component %u\n",
> + victim->level, victim_iter->comp_id);
> + return false;
> + }
> +
> + /* Any differing bits in the affinity mask? */
> + if (!cpumask_equal(tmp_cpumask, &victim_iter->affinity)) {
> + pr_debug("class %u component %u has Mismatched CPU mask with L3 equivalent\n"
> + "L3:%*pbl != victim:%*pbl\n",
> + victim->level, victim_iter->comp_id,
> + cpumask_pr_args(tmp_cpumask),
> + cpumask_pr_args(&victim_iter->affinity));
> +
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> +/*
> + * Test if the traffic for a class matches that at egress from the L3. For
> + * MSC at memory controllers this is only possible if there is a single L3
> + * as otherwise the counters at the memory can include bandwidth from the
> + * non-local L3.
> + */
> +static bool traffic_matches_l3(struct mpam_class *class)
> +{
> + int err, cpu;
> +
> + lockdep_assert_cpus_held();
> +
> + if (class->type == MPAM_CLASS_CACHE && class->level == 3)
> + return true;
> +
> + if (class->type == MPAM_CLASS_CACHE && class->level != 3) {
> + pr_debug("class %u is a different cache from L3\n", class->level);
> + return false;
> + }
> +
> + if (class->type != MPAM_CLASS_MEMORY) {
> + pr_debug("class %u is neither of type cache or memory\n", class->level);
> + return false;
> + }
> +
We bail if the calss isn't MPAM_CLASS_MEMORY here ...
> + cpumask_var_t __free(free_cpumask_var) tmp_cpumask = CPUMASK_VAR_NULL;
> + if (!alloc_cpumask_var(&tmp_cpumask, GFP_KERNEL)) {
> + pr_debug("cpumask allocation failed\n");
> + return false;
> + }
> +
> + if (class->type != MPAM_CLASS_MEMORY) {
> + pr_debug("class %u is neither of type cache or memory\n",
> + class->level);
> + return false;
> + }
> +
Duplicated check here as the previous one. So this check can be dropped.
> + cpu = cpumask_any_and(&class->affinity, cpu_online_mask);
> + err = find_l3_equivalent_bitmask(cpu, tmp_cpumask);
> + if (err) {
> + pr_debug("Failed to find L3 downstream to cpu %d\n", cpu);
> + return false;
> + }
> +
> + if (!cpumask_equal(tmp_cpumask, cpu_possible_mask)) {
> + pr_debug("There is more than one L3\n");
> + return false;
> + }
> +
> + /* Be strict; the traffic might stop in the intermediate cache. */
> + if (get_cpu_cacheinfo_id(cpu, 4) != -1) {
> + pr_debug("L3 isn't the last level of cache\n");
> + return false;
> + }
> +
> + if (num_possible_nodes() > 1) {
> + pr_debug("There is more than one numa node\n");
> + return false;
> + }
> +
> +#ifdef CONFIG_HMEM_REPORTING
> + if (node_devices[cpu_to_node(cpu)]->cache_dev) {
> + pr_debug("There is a memory side cache\n");
> + return false;
> + }
> +#endif
> +
> + return true;
> +}
> +
> /* Test whether we can export MPAM_CLASS_CACHE:{2,3}? */
> static void mpam_resctrl_pick_caches(void)
> {
> @@ -358,9 +545,68 @@ static void mpam_resctrl_pick_caches(void)
> }
> }
>
> +static void mpam_resctrl_pick_mba(void)
> +{
> + struct mpam_class *class, *candidate_class = NULL;
> + struct mpam_resctrl_res *res;
> +
> + lockdep_assert_cpus_held();
> +
> + guard(srcu)(&mpam_srcu);
> + list_for_each_entry_srcu(class, &mpam_classes, classes_list,
> + srcu_read_lock_held(&mpam_srcu)) {
> + struct mpam_props *cprops = &class->props;
> +
> + if (class->level != 3 && class->type == MPAM_CLASS_CACHE) {
> + pr_debug("class %u is a cache but not the L3\n", class->level);
> + continue;
> + }
> +
> + if (!class_has_usable_mba(cprops)) {
> + pr_debug("class %u has no bandwidth control\n",
> + class->level);
> + continue;
> + }
> +
> + if (!cpumask_equal(&class->affinity, cpu_possible_mask)) {
> + pr_debug("class %u has missing CPUs\n", class->level);
> + continue;
> + }
> +
> + if (!topology_matches_l3(class)) {
> + pr_debug("class %u topology doesn't match L3\n",
> + class->level);
> + continue;
> + }
> +
> + if (!traffic_matches_l3(class)) {
> + pr_debug("class %u traffic doesn't match L3 egress\n",
> + class->level);
> + continue;
> + }
> +
> + /*
> + * Pick a resource to be MBA that as close as possible to
> + * the L3. mbm_total counts the bandwidth leaving the L3
> + * cache and MBA should correspond as closely as possible
> + * for proper operation of mba_sc.
> + */
> + if (!candidate_class || class->level < candidate_class->level)
> + candidate_class = class;
> + }
> +
> + if (candidate_class) {
> + pr_debug("selected class %u to back MBA\n",
> + candidate_class->level);
> + res = &mpam_resctrl_controls[RDT_RESOURCE_MBA];
> + res->class = candidate_class;
> + }
> +}
> +
> static int mpam_resctrl_control_init(struct mpam_resctrl_res *res)
> {
> struct mpam_class *class = res->class;
> + struct mpam_props *cprops = &class->props;
> struct rdt_resource *r = &res->resctrl_res;
>
> switch (r->rid) {
> @@ -392,6 +638,19 @@ static int mpam_resctrl_control_init(struct mpam_resctrl_res *res)
> r->cache.shareable_bits = resctrl_get_default_ctrl(r);
> r->alloc_capable = true;
> break;
> + case RDT_RESOURCE_MBA:
> + r->schema_fmt = RESCTRL_SCHEMA_RANGE;
> + r->ctrl_scope = RESCTRL_L3_CACHE;
> +
> + r->membw.delay_linear = true;
> + r->membw.throttle_mode = THREAD_THROTTLE_UNDEFINED;
> + r->membw.min_bw = get_mba_min(cprops);
> + r->membw.max_bw = MAX_MBA_BW;
> + r->membw.bw_gran = get_mba_granularity(cprops);
> +
> + r->name = "MB";
> + r->alloc_capable = true;
> + break;
> default:
> return -EINVAL;
> }
> @@ -406,7 +665,17 @@ static int mpam_resctrl_pick_domain_id(int cpu, struct mpam_component *comp)
> if (class->type == MPAM_CLASS_CACHE)
> return comp->comp_id;
>
> - /* TODO: repaint domain ids to match the L3 domain ids */
> + if (topology_matches_l3(class)) {
> + /* Use the corresponding L3 component ID as the domain ID */
> + int id = get_cpu_cacheinfo_id(cpu, 3);
> +
> + /* Implies topology_matches_l3() made a mistake */
> + if (WARN_ON_ONCE(id == -1))
> + return comp->comp_id;
> +
> + return id;
> + }
> +
> /* Otherwise, expose the ID used by the firmware table code. */
> return comp->comp_id;
> }
> @@ -446,6 +715,12 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> case RDT_RESOURCE_L3:
> configured_by = mpam_feat_cpor_part;
> break;
> + case RDT_RESOURCE_MBA:
> + if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
> + configured_by = mpam_feat_mbw_max;
> + break;
> + }
> + fallthrough;
> default:
> return resctrl_get_default_ctrl(r);
> }
> @@ -457,6 +732,8 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> switch (configured_by) {
> case mpam_feat_cpor_part:
> return cfg->cpbm;
> + case mpam_feat_mbw_max:
> + return mbw_max_to_percent(cfg->mbw_max, cprops);
> default:
> return resctrl_get_default_ctrl(r);
> }
> @@ -504,6 +781,13 @@ int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> cfg.cpbm = cfg_val;
> mpam_set_feature(mpam_feat_cpor_part, &cfg);
> break;
> + case RDT_RESOURCE_MBA:
> + if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
> + cfg.mbw_max = percent_to_mbw_max(cfg_val, cprops);
> + mpam_set_feature(mpam_feat_mbw_max, &cfg);
> + break;
> + }
> + fallthrough;
> default:
> return -EINVAL;
> }
> @@ -775,6 +1059,7 @@ int mpam_resctrl_setup(void)
>
> /* Find some classes to use for controls */
> mpam_resctrl_pick_caches();
> + mpam_resctrl_pick_mba();
>
> /* Initialise the resctrl structures from the classes */
> for_each_mpam_resctrl_control(res, rid) {
Thanks,
Gavin
next prev parent reply other threads:[~2026-03-23 23:09 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 14:45 [PATCH v6 00/40] arm_mpam: Add KVM/arm64 and resctrl glue code Ben Horgan
2026-03-13 14:45 ` [PATCH v6 01/40] arm_mpam: Ensure in_reset_state is false after applying configuration Ben Horgan
2026-03-17 17:22 ` Jonathan Cameron
2026-03-23 4:37 ` Gavin Shan
2026-03-27 15:42 ` James Morse
2026-09-09 8:51 ` Jinjie Ruan
2026-03-13 14:45 ` [PATCH v6 02/40] arm_mpam: Reset when feature configuration bit unset Ben Horgan
2026-03-23 4:44 ` Gavin Shan
2026-03-27 16:21 ` James Morse
2026-09-11 6:44 ` Jinjie Ruan
2026-09-11 8:16 ` Ben Horgan
2026-03-13 14:45 ` [PATCH v6 03/40] arm64/sysreg: Add MPAMSM_EL1 register Ben Horgan
2026-09-09 8:37 ` Jinjie Ruan
2026-03-13 14:45 ` [PATCH v6 04/40] KVM: arm64: Preserve host MPAM configuration when changing traps Ben Horgan
2026-09-11 8:19 ` Jinjie Ruan
2026-03-13 14:45 ` [PATCH v6 05/40] KVM: arm64: Make MPAMSM_EL1 accesses UNDEF Ben Horgan
2026-09-11 8:20 ` Jinjie Ruan
2026-03-13 14:45 ` [PATCH v6 06/40] arm64: mpam: Context switch the MPAM registers Ben Horgan
2026-11-05 12:20 ` Jinjie Ruan
2026-11-05 12:36 ` Ben Horgan
2026-03-13 14:45 ` [PATCH v6 07/40] arm64: mpam: Re-initialise MPAM regs when CPU comes online Ben Horgan
2026-03-13 14:45 ` [PATCH v6 08/40] arm64: mpam: Drop the CONFIG_EXPERT restriction Ben Horgan
2026-03-27 15:43 ` James Morse
2026-03-13 14:45 ` [PATCH v6 09/40] arm64: mpam: Advertise the CPUs MPAM limits to the driver Ben Horgan
2026-03-13 14:45 ` [PATCH v6 10/40] arm64: mpam: Add cpu_pm notifier to restore MPAM sysregs Ben Horgan
2026-03-13 14:45 ` [PATCH v6 11/40] arm64: mpam: Initialise and context switch the MPAMSM_EL1 register Ben Horgan
2026-03-27 15:44 ` James Morse
2026-03-13 14:45 ` [PATCH v6 12/40] arm64: mpam: Add helpers to change a task or cpu's MPAM PARTID/PMG values Ben Horgan
2026-03-13 14:45 ` [PATCH v6 13/40] KVM: arm64: Force guest EL1 to use user-space's partid configuration Ben Horgan
2026-03-13 14:45 ` [PATCH v6 14/40] arm_mpam: resctrl: Add boilerplate cpuhp and domain allocation Ben Horgan
2026-03-23 6:31 ` Gavin Shan
2026-03-23 10:13 ` Ben Horgan
2026-03-26 12:20 ` James Morse
2026-03-13 14:45 ` [PATCH v6 15/40] arm_mpam: resctrl: Pick the caches we will use as resctrl resources Ben Horgan
2026-03-23 6:37 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 16/40] arm_mpam: resctrl: Implement resctrl_arch_reset_all_ctrls() Ben Horgan
2026-03-23 6:41 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 17/40] arm_mpam: resctrl: Add resctrl_arch_get_config() Ben Horgan
2026-03-23 6:47 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 18/40] arm_mpam: resctrl: Implement helpers to update configuration Ben Horgan
2026-03-23 6:51 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 19/40] arm_mpam: resctrl: Add plumbing against arm64 task and cpu hooks Ben Horgan
2026-03-23 6:55 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 20/40] arm_mpam: resctrl: Add CDP emulation Ben Horgan
2026-03-23 22:35 ` Gavin Shan
2026-03-13 14:45 ` [PATCH v6 21/40] arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT Ben Horgan
2026-03-18 11:04 ` Zeng Heng
2026-03-23 22:36 ` Gavin Shan
2026-03-27 15:44 ` James Morse
2026-03-13 14:45 ` [PATCH v6 22/40] arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats Ben Horgan
2026-03-23 22:49 ` Gavin Shan
2026-03-27 15:47 ` James Morse
2026-03-13 14:46 ` [PATCH v6 23/40] arm_mpam: resctrl: Add rmid index helpers Ben Horgan
2026-03-23 22:50 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 24/40] arm_mpam: resctrl: Wait for cacheinfo to be ready Ben Horgan
2026-03-23 22:53 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 25/40] arm_mpam: resctrl: Add support for 'MB' resource Ben Horgan
2026-03-23 23:09 ` Gavin Shan [this message]
2026-03-27 15:47 ` James Morse
2026-03-13 14:46 ` [PATCH v6 26/40] arm_mpam: resctrl: Add kunit test for control format conversions Ben Horgan
2026-03-23 23:10 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 27/40] arm_mpam: resctrl: Add monitor initialisation and domain boilerplate Ben Horgan
2026-03-24 3:40 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 28/40] arm_mpam: resctrl: Add support for csu counters Ben Horgan
2026-03-24 3:40 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 29/40] arm_mpam: resctrl: Allow resctrl to allocate monitors Ben Horgan
2026-03-24 3:41 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 30/40] arm_mpam: resctrl: Add resctrl_arch_rmid_read() Ben Horgan
2026-03-24 3:41 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 31/40] arm_mpam: resctrl: Update the rmid reallocation limit Ben Horgan
2026-03-24 3:42 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 32/40] arm_mpam: resctrl: Add empty definitions for assorted resctrl functions Ben Horgan
2026-03-24 3:42 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 33/40] arm64: mpam: Select ARCH_HAS_CPU_RESCTRL Ben Horgan
2026-03-24 3:42 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 34/40] arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl Ben Horgan
2026-03-24 3:43 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 35/40] arm_mpam: Add quirk framework Ben Horgan
2026-03-24 3:56 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 36/40] arm_mpam: Add workaround for T241-MPAM-1 Ben Horgan
2026-03-24 4:16 ` Gavin Shan
2026-03-27 15:48 ` James Morse
2026-03-13 14:46 ` [PATCH v6 37/40] arm_mpam: Add workaround for T241-MPAM-4 Ben Horgan
2026-03-24 4:19 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 38/40] arm_mpam: Add workaround for T241-MPAM-6 Ben Horgan
2026-03-24 4:20 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 39/40] arm_mpam: Quirk CMN-650's CSU NRDY behaviour Ben Horgan
2026-03-24 4:21 ` Gavin Shan
2026-03-13 14:46 ` [PATCH v6 40/40] arm64: mpam: Add initial MPAM documentation Ben Horgan
2026-03-24 6:04 ` Gavin Shan
2026-03-17 0:25 ` [PATCH v6 00/40] arm_mpam: Add KVM/arm64 and resctrl glue code Jesse Chick
2026-03-18 10:22 ` Ben Horgan
2026-03-18 8:09 ` Shaopeng Tan (Fujitsu)
2026-03-18 10:23 ` Ben Horgan
2026-03-23 4:41 ` Gavin Shan
2026-03-24 10:09 ` Ben Horgan
2026-04-01 23:56 ` Fenghua Yu
2026-04-13 14:31 ` Ben Horgan
2026-04-02 23:38 ` Rose, Charles
2026-04-13 14:32 ` Ben Horgan
2026-04-13 14:41 ` Ben Horgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ae3356d-a901-4b71-90df-557d468e4785@redhat.com \
--to=gshan@redhat.com \
--cc=amitsinght@marvell.com \
--cc=baisheng.gao@unisoc.com \
--cc=baolin.wang@linux.alibaba.com \
--cc=ben.horgan@arm.com \
--cc=carl@os.amperecomputing.com \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=dave.martin@arm.com \
--cc=david@kernel.org \
--cc=dfustini@baylibre.com \
--cc=fenghuay@nvidia.com \
--cc=james.morse@arm.com \
--cc=joey.gouly@arm.com \
--cc=jonathan.cameron@huawei.com \
--cc=kobak@nvidia.com \
--cc=kvmarm@lists.linux.dev \
--cc=lcherian@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=peternewman@google.com \
--cc=punit.agrawal@oss.qualcomm.com \
--cc=quic_jiles@quicinc.com \
--cc=reinette.chatre@intel.com \
--cc=rohit.mathew@arm.com \
--cc=scott@os.amperecomputing.com \
--cc=sdonthineni@nvidia.com \
--cc=suzuki.poulose@arm.com \
--cc=tan.shaopeng@fujitsu.com \
--cc=tan.shaopeng@jp.fujitsu.com \
--cc=will@kernel.org \
--cc=xhao@linux.alibaba.com \
--cc=zengheng4@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®