From: Manu Gautam <mgautam@codeaurora.org>
To: Kishon Vijay Abraham I <kishon@ti.com>, Felipe Balbi <balbi@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Jaehoon Chung <jh80.chung@samsung.com>,
Wei Yongjun <weiyongjun1@huawei.com>,
Fengguang Wu <fengguang.wu@intel.com>,
"open list:GENERIC PHY FRAMEWORK" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 2/6] phy: qcom-qmp: Power-on PHY before initialization
Date: Wed, 9 Aug 2017 16:21:21 +0530 [thread overview]
Message-ID: <3c9e0734-b103-b763-b209-49b3718e6493@codeaurora.org> (raw)
In-Reply-To: <1500634921-25914-3-git-send-email-mgautam@codeaurora.org>
On 7/21/2017 4:31 PM, Manu Gautam wrote:
> }
> @@ -729,19 +771,17 @@ static int qcom_qmp_phy_init(struct phy *phy)
> void __iomem *pcs = qphy->pcs;
> void __iomem *status;
> unsigned int mask, val;
> - int ret, i;
> + int ret;
>
> dev_vdbg(qmp->dev, "Initializing QMP phy\n");
>
> - for (i = 0; i < qmp->cfg->num_clks; i++) {
> - ret = clk_prepare_enable(qmp->clks[i]);
> - if (ret) {
> - dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
> - qmp->cfg->clk_list[i], ret);
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> - }
> - }
> + ret = qcom_qmp_phy_poweron(qmp);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_enable_clocks(qmp);
> + if (ret)
> + goto err_clk_enable;
>
> ret = qcom_qmp_phy_com_init(qmp);
In next version I will move poweron and clock_enable to com_init
as PCI QMP PHY might use multiple PHY instances (for each lane) each of
them will call phy_init/exit.
qcom_qmp_phy_com_init executed only once, hence better
suited for turning ON clocks/regulators.
> if (ret)
> @@ -801,8 +841,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
> err_lane_rst:
> qcom_qmp_phy_com_exit(qmp);
> err_com_init:
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> + qcom_qmp_phy_disable_clocks(qmp);
> +err_clk_enable:
> + qcom_qmp_phy_poweroff(qmp);
>
> return ret;
> }
> @@ -812,7 +853,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
> struct qmp_phy *qphy = phy_get_drvdata(phy);
> struct qcom_qmp *qmp = qphy->qmp;
> const struct qmp_phy_cfg *cfg = qmp->cfg;
> - int i = cfg->num_clks;
>
> clk_disable_unprepare(qphy->pipe_clk);
>
> @@ -830,8 +870,9 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>
> qcom_qmp_phy_com_exit(qmp);
>
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> + qcom_qmp_phy_disable_clocks(qmp);
> +
> + qcom_qmp_phy_poweroff(qmp);
On similar lines will be moving these to qcom_qmp_phy_com_exit().
>
> return 0;
> }
> @@ -958,8 +999,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> static const struct phy_ops qcom_qmp_phy_gen_ops = {
> .init = qcom_qmp_phy_init,
> .exit = qcom_qmp_phy_exit,
> - .power_on = qcom_qmp_phy_poweron,
> - .power_off = qcom_qmp_phy_poweroff,
> .owner = THIS_MODULE,
> };
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-08-09 10:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1500634921-25914-1-git-send-email-mgautam@codeaurora.org>
2017-07-21 11:01 ` [PATCH v1 1/6] phy: qcom-qmp: Fix phy pipe clock gating Manu Gautam
2017-07-21 16:59 ` Stephen Boyd
2017-07-24 9:50 ` Manu Gautam
2017-07-21 11:01 ` [PATCH v1 2/6] phy: qcom-qmp: Power-on PHY before initialization Manu Gautam
2017-08-09 10:51 ` Manu Gautam [this message]
2017-07-21 11:01 ` [PATCH v1 3/6] phy: qcom-qusb2: " Manu Gautam
2017-07-21 11:01 ` [PATCH v1 4/6] phy: qcom-qusb2: Add support for runtime PM Manu Gautam
2017-07-21 17:24 ` Stephen Boyd
2017-07-24 10:03 ` Manu Gautam
2017-07-21 11:02 ` [PATCH v1 5/6] phy: qcom-qmp: " Manu Gautam
2017-07-21 11:02 ` [PATCH v1 6/6] usb: dwc3: core: Notify USB3 PHY as well for DRD modes Manu Gautam
2017-07-21 17:09 ` Stephen Boyd
2017-07-24 9:59 ` Manu Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c9e0734-b103-b763-b209-49b3718e6493@codeaurora.org \
--to=mgautam@codeaurora.org \
--cc=balbi@kernel.org \
--cc=fengguang.wu@intel.com \
--cc=jh80.chung@samsung.com \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vivek.gautam@codeaurora.org \
--cc=weiyongjun1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome