From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
To: Jarkko Sakkinen <jarkko@kernel.org>,
Lino Sanfilippo <LinoSanfilippo@gmx.de>,
peterhuewe@gmx.de, jgg@ziepe.ca
Cc: jsnitsel@redhat.com, hdegoede@redhat.com, oe-lkp@lists.linux.dev,
lkp@intel.com, peter.ujfalusi@linux.intel.com,
peterz@infradead.org, linux@mniewoehner.de,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
lukas@wunner.de, p.rosenberger@kunbus.com
Subject: Re: [PATCH 1/2] tpm, tpm_tis: Handle interrupt storm
Date: Fri, 26 May 2023 01:45:23 +0200 [thread overview]
Message-ID: <3d8e6d4e-9434-19d0-6307-c67fe9cfa867@kunbus.com> (raw)
In-Reply-To: <CSU7G2UZSZ8K.22EGXU5CJTZBB@suppilovahvero>
Hi,
On 24.05.23 05:58, Jarkko Sakkinen wrote:
>> Commit e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") enabled
>> interrupts instead of polling on all capable TPMs. Unfortunately, on some
>> products the interrupt line is either never asserted or never deasserted.
>
> Use Reported-by and Closes tag and remove this paragraph.
>
> In Closes link instead from lore the email where the bug was reported.
Ok
>
>> The former causes interrupt timeouts and is detected by
>> tpm_tis_core_init(). The latter results in interrupt storms.
>
> Please describe instead the system where the bug was realized. Don't
> worry about speculative descriptions. We only deal with ones actually
> realized.
>
>> Recent reports concern the Lenovo ThinkStation P360 Tiny, Lenovo ThinkPad
>> L490 and Inspur NF5180M6:
>>
>> https://lore.kernel.org/linux-integrity/20230511005403.24689-1-jsnitsel@redhat.com/
>> https://lore.kernel.org/linux-integrity/d80b180a569a9f068d3a2614f062cfa3a78af5a6.camel@kernel.org/
>
> Please remove all of this, as the fixes have been handled. Let's keep
> the commit message focused.
>
Ok.
>> The current approach to avoid those storms is to disable interrupts by
>> adding a DMI quirk for the concerned device.
>>
>> However this is a maintenance burden in the long run, so use a generic
>> approach:
>>
>> Detect an interrupt storm by counting the number of unhandled interrupts
>> within a 10 ms time interval. In case that more than 1000 were unhandled
>> deactivate interrupts, deregister the handler and fall back to polling.
>>
>> This equals the implementation that handles interrupt storms in
>> note_interrupt() by means of timestamps and counters in struct irq_desc.
>> However the function to access this structure is private so the logic has
>> to be reimplemented in the TPM TIS core.
>
> I only now found out that this is based on kernel/irq/spurious.c code
> partly. Why this was unmentioned?
>
> That would make this already more legitimate because it is based
> on field tested metrics.
>> Then we only have to discuss about counter.
I mentioned this in one of my responses:
https://lore.kernel.org/all/da435e0d-5f22-fac7-bc10-96a0fd4c6d54@kunbus.com/
>
>> routine trigger a worker thread that executes the unregistration.
>>
>> Suggested-by: Lukas Wunner <lukas@wunner.de>
>> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
>> ---
>> drivers/char/tpm/tpm_tis_core.c | 71 +++++++++++++++++++++++++++++++--
>> drivers/char/tpm/tpm_tis_core.h | 6 +++
>> 2 files changed, 74 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
>> index 558144fa707a..458ebf8c2f16 100644
>> --- a/drivers/char/tpm/tpm_tis_core.c
>> +++ b/drivers/char/tpm/tpm_tis_core.c
>> @@ -752,6 +752,55 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
>> return status == TPM_STS_COMMAND_READY;
>> }
>>
>> +static void tpm_tis_handle_irq_storm(struct tpm_chip *chip)
>> +{
>> + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>> + int intmask = 0;
>> +
>> + dev_err(&chip->dev, HW_ERR
>> + "TPM interrupt storm detected, polling instead\n");
>
> Degrading this to warn is fine because it is legit behaviour in a
> sense.
>
Agreed.
>> +
>> + tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
>> +
>> + intmask &= ~TPM_GLOBAL_INT_ENABLE;
>> +
>> + tpm_tis_request_locality(chip, 0);
>> + tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
>> + tpm_tis_relinquish_locality(chip, 0);
>> +
>> + chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>> +
>> + /*
>> + * We must not call devm_free_irq() from within the interrupt handler,
>
> Never use "we" form. Always use either:
>
> 1. Imperative
> 2. Passive
>
> I.e. to address this, you would write instead "devm_free_irq() must not
> be called within the interrupt handler because ...".
>
Ok.
>> + * since this function waits for running interrupt handlers to finish
>> + * and thus it would deadlock. Instead trigger a worker that does the
>> + * unregistration.
>> + */
>> + schedule_work(&priv->free_irq_work);
>> +}
>> +
>> +static void tpm_tis_process_unhandled_interrupt(struct tpm_chip *chip)
>> +{
>> + const unsigned int MAX_UNHANDLED_IRQS = 1000;
>> + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>
> Reverse order and add empty line.
>
Ok.
>> + /*
>> + * The worker to free the TPM interrupt (free_irq_work) may already
>> + * be scheduled, so make sure it is not scheduled again.
>> + */
>> + if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
>> + return;
>> +
>> + if (time_after(jiffies, priv->last_unhandled_irq + HZ/10))
>> + priv->unhandled_irqs = 1;
>> + else
>> + priv->unhandled_irqs++;
>> +
>> + priv->last_unhandled_irq = jiffies;
>> +
>> + if (priv->unhandled_irqs > MAX_UNHANDLED_IRQS)
>> + tpm_tis_handle_irq_storm(chip);
>
> Why wouldn't we switch to polling mode even when there is a single
> unhandled IRQ?
>
As Lukas wrote, not handling an interrupt may be legit if it was raised
by a device that shares the interrupt line with the TPM.
Regards,
Lino
prev parent reply other threads:[~2023-05-25 23:45 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-22 14:31 Lino Sanfilippo
2023-05-22 14:31 ` [PATCH 2/2] tpm, tpm_tis: reuse code in disable_interrupts() Lino Sanfilippo
2023-05-22 22:45 ` Jerry Snitselaar
2023-05-23 7:08 ` Péter Ujfalusi
2023-05-23 19:07 ` Jarkko Sakkinen
2023-05-23 20:52 ` Lino Sanfilippo
2023-05-24 1:29 ` Jarkko Sakkinen
2023-05-22 22:44 ` [PATCH 1/2] tpm, tpm_tis: Handle interrupt storm Jerry Snitselaar
2023-05-23 6:48 ` Péter Ujfalusi
2023-05-23 7:07 ` Péter Ujfalusi
2023-05-23 7:44 ` Lukas Wunner
2023-05-23 9:14 ` Péter Ujfalusi
2023-05-23 9:20 ` Hans de Goede
2023-05-23 9:35 ` Péter Ujfalusi
2023-05-23 10:35 ` Lino Sanfilippo
2023-05-23 15:19 ` Lukas Wunner
2023-05-23 10:41 ` Lino Sanfilippo
2023-05-23 15:16 ` Lukas Wunner
2023-05-24 9:08 ` Hans de Goede
2023-05-29 10:44 ` Michael Niewöhner
2023-05-23 19:35 ` Jarkko Sakkinen
2023-05-23 18:53 ` Jarkko Sakkinen
2023-05-23 19:00 ` Jarkko Sakkinen
2023-05-23 19:46 ` Lukas Wunner
2023-05-24 1:44 ` Jarkko Sakkinen
2023-05-23 20:50 ` Lino Sanfilippo
2023-05-23 19:12 ` Jarkko Sakkinen
2023-05-23 22:32 ` Jerry Snitselaar
2023-05-24 1:21 ` Jarkko Sakkinen
2023-05-23 19:37 ` Lukas Wunner
2023-05-24 1:46 ` Jarkko Sakkinen
2023-05-23 20:46 ` Lino Sanfilippo
2023-05-29 6:46 ` Péter Ujfalusi
2023-05-29 13:15 ` Lino Sanfilippo
2023-06-06 16:42 ` Jarkko Sakkinen
2023-05-30 17:56 ` Jerry Snitselaar
2023-06-06 16:35 ` Jarkko Sakkinen
2023-06-06 16:45 ` Jarkko Sakkinen
2023-05-24 3:58 ` Jarkko Sakkinen
2023-05-24 3:59 ` Jarkko Sakkinen
2023-05-24 7:29 ` Lukas Wunner
2023-05-24 15:30 ` Jarkko Sakkinen
2023-05-26 0:37 ` Lino Sanfilippo
2023-05-30 10:31 ` Lino Sanfilippo
2023-05-25 23:45 ` Lino Sanfilippo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d8e6d4e-9434-19d0-6307-c67fe9cfa867@kunbus.com \
--to=l.sanfilippo@kunbus.com \
--cc=LinoSanfilippo@gmx.de \
--cc=hdegoede@redhat.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=jsnitsel@redhat.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@mniewoehner.de \
--cc=lkp@intel.com \
--cc=lukas@wunner.de \
--cc=oe-lkp@lists.linux.dev \
--cc=p.rosenberger@kunbus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=peterhuewe@gmx.de \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®