Cannot open root device on 2.6.4

Cannot open root device on 2.6.4

[Paul Hickey]

Running RH9 on a AMD686. Kernel 2.4.8 works fine.

I receive the follwing error when booting my new 2.6.4 kernel:
_______________________________________________________
*VFS: Cannot open root device "LABEL=/" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel Panic: VFS: Unable to mount root fs on unknown-block(0,0)*
_______________________________________________________
Upon compiling the kernel I was informed that:

Root Device is (3,2)
Does that have something to do with it? Please advise the appropriate 
action to webmaster@sunshinearcade.com
I tried it with initrd as well as the above both with the same error.

Below is my grub.conf
______________________________________________________
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/hda2
#          initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
title Red Hat Linux (2.4.20-8)
    root (hd0,0)
    kernel /vmlinuz-2.4.20-8 ro root=LABEL=/
    initrd /initrd-2.4.20-8.img
title Test Kernel (2.6.4)
    root (hd0,0)
    kernel /bzImage-2.6.4-1 ro root=LABEL=/
____________________________________________________