mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init
@ 2017-09-28 10:44 Sudeep Holla
  2017-09-28 10:47 ` Sudeep Holla
  0 siblings, 1 reply; 4+ messages in thread
From: Sudeep Holla @ 2017-09-28 10:44 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: Sudeep Holla, linux-kernel, Rob Herring

Hi Rob, Arnd,

There's a push to place all firmware related device node under
/firmware/ node. However all the associated drivers are dealing with
device creation in their own ways. For example, qcom_scm, optee and
meson-sm drivers deal with the node in their own way. The SCMI drivers
I am about to add also needs to do the same. This small series is to
make it generic so that all the users of /firmware/ node need not
repeat the same.

There was concern that /firmware in DT is fit for /sys/firmware in sysfs.
IMO anything exposed to userspace from such firmware interface must
be in "/sys/firmware", but I don't see any issue with kernel handling
them as platform device/driver internally.

Sudeep Holla (4):
  of: platform: populate /firmware/ node from
    of_platform_default_populate_init()
  firmware: qcom_scm: drop redandant of_platform_populate
  drivers: tee: rework optee_driver_{init,exit} to use platform device
  firmware: meson-sm: rework meson_sm_init to use
    module_platform_driver_probe

 drivers/firmware/meson/meson_sm.c | 21 ++++++-----
 drivers/firmware/qcom_scm.c       | 24 -------------
 drivers/of/platform.c             |  4 +++
 drivers/tee/optee/core.c          | 74 +++++++++++++--------------------------
 4 files changed, 41 insertions(+), 82 deletions(-)

--
2.7.4

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init
  2017-09-28 10:44 [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init Sudeep Holla
@ 2017-09-28 10:47 ` Sudeep Holla
  0 siblings, 0 replies; 4+ messages in thread
From: Sudeep Holla @ 2017-09-28 10:47 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: Sudeep Holla, linux-kernel, Rob Herring



On 28/09/17 11:44, Sudeep Holla wrote:
> Hi Rob, Arnd,
> 
> There's a push to place all firmware related device node under
> /firmware/ node. However all the associated drivers are dealing with
> device creation in their own ways. For example, qcom_scm, optee and
> meson-sm drivers deal with the node in their own way. The SCMI drivers
> I am about to add also needs to do the same. This small series is to
> make it generic so that all the users of /firmware/ node need not
> repeat the same.
> 
> There was concern that /firmware in DT is fit for /sys/firmware in sysfs.
> IMO anything exposed to userspace from such firmware interface must
> be in "/sys/firmware", but I don't see any issue with kernel handling
> them as platform device/driver internally.
> 

Please ignore this, something went wrong and patches were not delivered,
have reposted it separately.

-- 
Regards,
Sudeep

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init
  2017-09-28 10:45 Sudeep Holla
@ 2017-10-16 22:44 ` Frank Rowand
  0 siblings, 0 replies; 4+ messages in thread
From: Frank Rowand @ 2017-10-16 22:44 UTC (permalink / raw)
  To: Sudeep Holla, linux-arm-kernel
  Cc: linux-kernel, devicetree, Rob Herring, Frank Rowand

+ me

On 09/28/17 03:45, Sudeep Holla wrote:
> Hi Rob, Arnd,
> 
> There's a push to place all firmware related device node under
> /firmware/ node. However all the associated drivers are dealing with
> device creation in their own ways. For example, qcom_scm, optee and
> meson-sm drivers deal with the node in their own way. The SCMI drivers
> I am about to add also needs to do the same. This small series is to
> make it generic so that all the users of /firmware/ node need not
> repeat the same.
> 
> There was concern that /firmware in DT is fit for /sys/firmware in sysfs.
> IMO anything exposed to userspace from such firmware interface must
> be in "/sys/firmware", but I don't see any issue with kernel handling
> them as platform device/driver internally.
> 
> Sudeep Holla (4):
>   of: platform: populate /firmware/ node from
>     of_platform_default_populate_init()
>   firmware: qcom_scm: drop redandant of_platform_populate
>   drivers: tee: rework optee_driver_{init,exit} to use platform device
>   firmware: meson-sm: rework meson_sm_init to use
>     module_platform_driver_probe
> 
>  drivers/firmware/meson/meson_sm.c | 21 ++++++-----
>  drivers/firmware/qcom_scm.c       | 24 -------------
>  drivers/of/platform.c             |  4 +++
>  drivers/tee/optee/core.c          | 74 +++++++++++++--------------------------
>  4 files changed, 41 insertions(+), 82 deletions(-)
> 
> --
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init
@ 2017-09-28 10:45 Sudeep Holla
  2017-10-16 22:44 ` Frank Rowand
  0 siblings, 1 reply; 4+ messages in thread
From: Sudeep Holla @ 2017-09-28 10:45 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: Sudeep Holla, linux-kernel, devicetree, Rob Herring

Hi Rob, Arnd,

There's a push to place all firmware related device node under
/firmware/ node. However all the associated drivers are dealing with
device creation in their own ways. For example, qcom_scm, optee and
meson-sm drivers deal with the node in their own way. The SCMI drivers
I am about to add also needs to do the same. This small series is to
make it generic so that all the users of /firmware/ node need not
repeat the same.

There was concern that /firmware in DT is fit for /sys/firmware in sysfs.
IMO anything exposed to userspace from such firmware interface must
be in "/sys/firmware", but I don't see any issue with kernel handling
them as platform device/driver internally.

Sudeep Holla (4):
  of: platform: populate /firmware/ node from
    of_platform_default_populate_init()
  firmware: qcom_scm: drop redandant of_platform_populate
  drivers: tee: rework optee_driver_{init,exit} to use platform device
  firmware: meson-sm: rework meson_sm_init to use
    module_platform_driver_probe

 drivers/firmware/meson/meson_sm.c | 21 ++++++-----
 drivers/firmware/qcom_scm.c       | 24 -------------
 drivers/of/platform.c             |  4 +++
 drivers/tee/optee/core.c          | 74 +++++++++++++--------------------------
 4 files changed, 41 insertions(+), 82 deletions(-)

--
2.7.4

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-10-16 22:44 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-28 10:44 [RESEND][PATCH 0/4] firmware: of: populate /firmware/ node during init Sudeep Holla
2017-09-28 10:47 ` Sudeep Holla
2017-09-28 10:45 Sudeep Holla
2017-10-16 22:44 ` Frank Rowand

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®