* [PATCH] powerpc: remove redundant 'default n' from Kconfig-s
[not found] <CGME20181009153948eucas1p14ad8b13d2482dbb9449888d544ddee15@eucas1p1.samsung.com>
@ 2018-10-09 15:39 ` Bartlomiej Zolnierkiewicz
2018-10-15 4:01 ` Michael Ellerman
0 siblings, 1 reply; 2+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2018-10-09 15:39 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel, Alistair Popple, Matt Porter,
Arnd Bergmann, Geoff Levand
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/powerpc/Kconfig | 14 --------------
arch/powerpc/Kconfig.debug | 6 ------
arch/powerpc/platforms/40x/Kconfig | 9 ---------
arch/powerpc/platforms/44x/Kconfig | 22 ----------------------
arch/powerpc/platforms/82xx/Kconfig | 1 -
arch/powerpc/platforms/Kconfig | 21 ---------------------
arch/powerpc/platforms/Kconfig.cputype | 4 ----
arch/powerpc/platforms/cell/Kconfig | 3 ---
arch/powerpc/platforms/maple/Kconfig | 1 -
arch/powerpc/platforms/pasemi/Kconfig | 1 -
arch/powerpc/platforms/powernv/Kconfig | 1 -
arch/powerpc/platforms/ps3/Kconfig | 2 --
arch/powerpc/platforms/pseries/Kconfig | 2 --
arch/powerpc/sysdev/Kconfig | 5 -----
arch/powerpc/sysdev/xive/Kconfig | 3 ---
15 files changed, 95 deletions(-)
Index: b/arch/powerpc/Kconfig
===================================================================
--- a/arch/powerpc/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -285,12 +285,10 @@ config ARCH_MAY_HAVE_PC_FDC
config PPC_UDBG_16550
bool
- default n
config GENERIC_TBSYNC
bool
default y if PPC32 && SMP
- default n
config AUDIT_ARCH
bool
@@ -309,13 +307,11 @@ config EPAPR_BOOT
bool
help
Used to allow a board to specify it wants an ePAPR compliant wrapper.
- default n
config DEFAULT_UIMAGE
bool
help
Used to allow a board to specify it wants a uImage built by default
- default n
config ARCH_HIBERNATION_POSSIBLE
bool
@@ -329,11 +325,9 @@ config ARCH_SUSPEND_POSSIBLE
config PPC_DCR_NATIVE
bool
- default n
config PPC_DCR_MMIO
bool
- default n
config PPC_DCR
bool
@@ -344,7 +338,6 @@ config PPC_OF_PLATFORM_PCI
bool
depends on PCI
depends on PPC64 # not supported on 32 bits yet
- default n
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
depends on PPC32 || PPC_BOOK3S_64
@@ -447,14 +440,12 @@ config PPC_TRANSACTIONAL_MEM
depends on SMP
select ALTIVEC
select VSX
- default n
---help---
Support user-mode Transactional Memory on POWERPC.
config LD_HEAD_STUB_CATCH
bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
depends on PPC64
- default n
help
Very large kernels can cause linker branch stubs to be generated by
code in head_64.S, which moves the head text sections out of their
@@ -557,7 +548,6 @@ config RELOCATABLE
config RELOCATABLE_TEST
bool "Test relocatable kernel"
depends on (PPC64 && RELOCATABLE)
- default n
help
This runs the relocatable kernel at the address it was initially
loaded at, which tends to be non-zero and therefore test the
@@ -769,7 +759,6 @@ config PPC_SUBPAGE_PROT
config PPC_COPRO_BASE
bool
- default n
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
@@ -870,7 +859,6 @@ config PPC_INDIRECT_PCI
bool
depends on PCI
default y if 40x || 44x
- default n
config EISA
bool
@@ -967,7 +955,6 @@ source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
bool
- default n
config RAPIDIO
tristate "RapidIO support"
@@ -990,7 +977,6 @@ endmenu
config NONSTATIC_KERNEL
bool
- default n
menu "Advanced setup"
depends on PPC32
Index: b/arch/powerpc/Kconfig.debug
===================================================================
--- a/arch/powerpc/Kconfig.debug 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/Kconfig.debug 2018-10-09 17:32:25.055264623 +0200
@@ -2,7 +2,6 @@
config PPC_DISABLE_WERROR
bool "Don't build arch/powerpc code with -Werror"
- default n
help
This option tells the compiler NOT to build the code under
arch/powerpc with the -Werror flag (which means warnings
@@ -56,7 +55,6 @@ config PPC_EMULATED_STATS
config CODE_PATCHING_SELFTEST
bool "Run self-tests of the code-patching code"
depends on DEBUG_KERNEL
- default n
config JUMP_LABEL_FEATURE_CHECKS
bool "Enable use of jump label for cpu/mmu_has_feature()"
@@ -70,7 +68,6 @@ config JUMP_LABEL_FEATURE_CHECKS
config JUMP_LABEL_FEATURE_CHECK_DEBUG
bool "Do extra check on feature fixup calls"
depends on DEBUG_KERNEL && JUMP_LABEL_FEATURE_CHECKS
- default n
help
This tries to catch incorrect usage of cpu_has_feature() and
mmu_has_feature() in the code.
@@ -80,16 +77,13 @@ config JUMP_LABEL_FEATURE_CHECK_DEBUG
config FTR_FIXUP_SELFTEST
bool "Run self-tests of the feature-fixup code"
depends on DEBUG_KERNEL
- default n
config MSI_BITMAP_SELFTEST
bool "Run self-tests of the MSI bitmap code"
depends on DEBUG_KERNEL
- default n
config PPC_IRQ_SOFT_MASK_DEBUG
bool "Include extra checks for powerpc irq soft masking"
- default n
config XMON
bool "Include xmon kernel debugger"
Index: b/arch/powerpc/platforms/40x/Kconfig
===================================================================
--- a/arch/powerpc/platforms/40x/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/40x/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -2,7 +2,6 @@
config ACADIA
bool "Acadia"
depends on 40x
- default n
select PPC40x_SIMPLE
select 405EZ
help
@@ -11,7 +10,6 @@ config ACADIA
config EP405
bool "EP405/EP405PC"
depends on 40x
- default n
select 405GP
select PCI
help
@@ -20,7 +18,6 @@ config EP405
config HOTFOOT
bool "Hotfoot"
depends on 40x
- default n
select PPC40x_SIMPLE
select PCI
help
@@ -29,7 +26,6 @@ config HOTFOOT
config KILAUEA
bool "Kilauea"
depends on 40x
- default n
select 405EX
select PPC40x_SIMPLE
select PPC4xx_PCI_EXPRESS
@@ -41,7 +37,6 @@ config KILAUEA
config MAKALU
bool "Makalu"
depends on 40x
- default n
select 405EX
select PCI
select PPC4xx_PCI_EXPRESS
@@ -62,7 +57,6 @@ config WALNUT
config XILINX_VIRTEX_GENERIC_BOARD
bool "Generic Xilinx Virtex board"
depends on 40x
- default n
select XILINX_VIRTEX_II_PRO
select XILINX_VIRTEX_4_FX
select XILINX_INTC
@@ -80,7 +74,6 @@ config XILINX_VIRTEX_GENERIC_BOARD
config OBS600
bool "OpenBlockS 600"
depends on 40x
- default n
select 405EX
select PPC40x_SIMPLE
help
@@ -90,7 +83,6 @@ config OBS600
config PPC40x_SIMPLE
bool "Simple PowerPC 40x board support"
depends on 40x
- default n
help
This option enables the simple PowerPC 40x platform support.
@@ -156,7 +148,6 @@ config IBM405_ERR51
config APM8018X
bool "APM8018X"
depends on 40x
- default n
select PPC40x_SIMPLE
help
This option enables support for the AppliedMicro APM8018X evaluation
Index: b/arch/powerpc/platforms/44x/Kconfig
===================================================================
--- a/arch/powerpc/platforms/44x/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/44x/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -2,7 +2,6 @@
config PPC_47x
bool "Support for 47x variant"
depends on 44x
- default n
select MPIC
help
This option enables support for the 47x family of processors and is
@@ -11,7 +10,6 @@ config PPC_47x
config BAMBOO
bool "Bamboo"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440EP
select PCI
@@ -21,7 +19,6 @@ config BAMBOO
config BLUESTONE
bool "Bluestone"
depends on 44x
- default n
select PPC44x_SIMPLE
select APM821xx
select PCI_MSI
@@ -44,7 +41,6 @@ config EBONY
config SAM440EP
bool "Sam440ep"
depends on 44x
- default n
select 440EP
select PCI
help
@@ -53,7 +49,6 @@ config SAM440EP
config SEQUOIA
bool "Sequoia"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440EPX
help
@@ -62,7 +57,6 @@ config SEQUOIA
config TAISHAN
bool "Taishan"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440GX
select PCI
@@ -73,7 +67,6 @@ config TAISHAN
config KATMAI
bool "Katmai"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440SPe
select PCI
@@ -86,7 +79,6 @@ config KATMAI
config RAINIER
bool "Rainier"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440GRX
select PCI
@@ -96,7 +88,6 @@ config RAINIER
config WARP
bool "PIKA Warp"
depends on 44x
- default n
select 440EP
help
This option enables support for the PIKA Warp(tm) Appliance. The Warp
@@ -109,7 +100,6 @@ config WARP
config ARCHES
bool "Arches"
depends on 44x
- default n
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
@@ -120,7 +110,6 @@ config ARCHES
config CANYONLANDS
bool "Canyonlands"
depends on 44x
- default n
select 460EX
select PCI
select PPC4xx_PCI_EXPRESS
@@ -134,7 +123,6 @@ config CANYONLANDS
config GLACIER
bool "Glacier"
depends on 44x
- default n
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
@@ -147,7 +135,6 @@ config GLACIER
config REDWOOD
bool "Redwood"
depends on 44x
- default n
select PPC44x_SIMPLE
select 460SX
select PCI
@@ -160,7 +147,6 @@ config REDWOOD
config EIGER
bool "Eiger"
depends on 44x
- default n
select PPC44x_SIMPLE
select 460SX
select PCI
@@ -172,7 +158,6 @@ config EIGER
config YOSEMITE
bool "Yosemite"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440EP
select PCI
@@ -182,7 +167,6 @@ config YOSEMITE
config ISS4xx
bool "ISS 4xx Simulator"
depends on (44x || 40x)
- default n
select 405GP if 40x
select 440GP if 44x && !PPC_47x
select PPC_FPU
@@ -193,7 +177,6 @@ config ISS4xx
config CURRITUCK
bool "IBM Currituck (476fpe) Support"
depends on PPC_47x
- default n
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
@@ -203,7 +186,6 @@ config CURRITUCK
config FSP2
bool "IBM FSP2 (476fpe) Support"
depends on PPC_47x
- default n
select 476FPE
select IBM_EMAC_EMAC4 if IBM_EMAC
select IBM_EMAC_RGMII if IBM_EMAC
@@ -215,7 +197,6 @@ config FSP2
config AKEBONO
bool "IBM Akebono (476gtr) Support"
depends on PPC_47x
- default n
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
@@ -241,7 +222,6 @@ config AKEBONO
config ICON
bool "Icon"
depends on 44x
- default n
select PPC44x_SIMPLE
select 440SPe
select PCI
@@ -252,7 +232,6 @@ config ICON
config XILINX_VIRTEX440_GENERIC_BOARD
bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x
- default n
select XILINX_VIRTEX_5_FXT
select XILINX_INTC
help
@@ -280,7 +259,6 @@ config XILINX_ML510
config PPC44x_SIMPLE
bool "Simple PowerPC 44x board support"
depends on 44x
- default n
help
This option enables the simple PowerPC 44x platform support.
Index: b/arch/powerpc/platforms/82xx/Kconfig
===================================================================
--- a/arch/powerpc/platforms/82xx/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/82xx/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -51,7 +51,6 @@ endif
config PQ2ADS
bool
- default n
config 8260
bool
Index: b/arch/powerpc/platforms/Kconfig
===================================================================
--- a/arch/powerpc/platforms/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -23,7 +23,6 @@ source "arch/powerpc/platforms/amigaone/
config KVM_GUEST
bool "KVM Guest support"
- default n
select EPAPR_PARAVIRT
---help---
This option enables various optimizations for running under the KVM
@@ -34,7 +33,6 @@ config KVM_GUEST
config EPAPR_PARAVIRT
bool "ePAPR para-virtualization support"
- default n
help
Enables ePAPR para-virtualization support for guests.
@@ -74,7 +72,6 @@ config PPC_DT_CPU_FTRS
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
- default n
config PPC_SMP_MUXED_IPI
bool
@@ -86,16 +83,13 @@ config PPC_SMP_MUXED_IPI
config IPIC
bool
- default n
config MPIC
bool
- default n
config MPIC_TIMER
bool "MPIC Global Timer"
depends on MPIC && FSL_SOC
- default n
help
The MPIC global timer is a hardware timer inside the
Freescale PIC complying with OpenPIC standard. When the
@@ -107,7 +101,6 @@ config MPIC_TIMER
config FSL_MPIC_TIMER_WAKEUP
tristate "Freescale MPIC global timer wakeup driver"
depends on FSL_SOC && MPIC_TIMER && PM
- default n
help
The driver provides a way to wake up the system by MPIC
timer.
@@ -115,43 +108,35 @@ config FSL_MPIC_TIMER_WAKEUP
config PPC_EPAPR_HV_PIC
bool
- default n
select EPAPR_PARAVIRT
config MPIC_WEIRD
bool
- default n
config MPIC_MSGR
bool "MPIC message register support"
depends on MPIC
- default n
help
Enables support for the MPIC message registers. These
registers are used for inter-processor communication.
config PPC_I8259
bool
- default n
config U3_DART
bool
depends on PPC64
- default n
config PPC_RTAS
bool
- default n
config RTAS_ERROR_LOGGING
bool
depends on PPC_RTAS
- default n
config PPC_RTAS_DAEMON
bool
depends on PPC_RTAS
- default n
config RTAS_PROC
bool "Proc interface to RTAS"
@@ -164,11 +149,9 @@ config RTAS_FLASH
config MMIO_NVRAM
bool
- default n
config MPIC_U3_HT_IRQS
bool
- default n
config MPIC_BROKEN_REGREAD
bool
@@ -187,15 +170,12 @@ config EEH
config PPC_MPC106
bool
- default n
config PPC_970_NAP
bool
- default n
config PPC_P7_NAP
bool
- default n
config PPC_INDIRECT_PIO
bool
@@ -295,7 +275,6 @@ config CPM2
config FSL_ULI1575
bool
- default n
select GENERIC_ISA_DMA
help
Supports for the ULI1575 PCIe south bridge that exists on some
Index: b/arch/powerpc/platforms/Kconfig.cputype
===================================================================
--- a/arch/powerpc/platforms/Kconfig.cputype 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/Kconfig.cputype 2018-10-09 17:32:25.055264623 +0200
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
config PPC64
bool "64-bit kernel"
- default n
select ZLIB_DEFLATE
help
This option selects whether a 32-bit or a 64-bit kernel
@@ -369,7 +368,6 @@ config PPC_MM_SLICES
bool
default y if PPC_BOOK3S_64
default y if PPC_8xx && HUGETLB_PAGE
- default n
config PPC_HAVE_PMU_SUPPORT
bool
@@ -383,7 +381,6 @@ config PPC_PERF_CTRS
config FORCE_SMP
# Allow platforms to force SMP=y by selecting this
bool
- default n
select SMP
config SMP
@@ -424,7 +421,6 @@ config CHECK_CACHE_COHERENCY
config PPC_DOORBELL
bool
- default n
endmenu
Index: b/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- a/arch/powerpc/platforms/cell/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/cell/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
config PPC_CELL
bool
- default n
config PPC_CELL_COMMON
bool
@@ -22,7 +21,6 @@ config PPC_CELL_NATIVE
select IBM_EMAC_RGMII if IBM_EMAC
select IBM_EMAC_ZMII if IBM_EMAC #test only
select IBM_EMAC_TAH if IBM_EMAC #test only
- default n
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
@@ -54,7 +52,6 @@ config SPU_FS
config SPU_BASE
bool
- default n
select PPC_COPRO_BASE
config CBE_RAS
Index: b/arch/powerpc/platforms/maple/Kconfig
===================================================================
--- a/arch/powerpc/platforms/maple/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/maple/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -13,7 +13,6 @@ config PPC_MAPLE
select PPC_RTAS
select MMIO_NVRAM
select ATA_NONSTANDARD if ATA
- default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more information, refer to <http://www.970eval.com>
Index: b/arch/powerpc/platforms/pasemi/Kconfig
===================================================================
--- a/arch/powerpc/platforms/pasemi/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/pasemi/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -2,7 +2,6 @@
config PPC_PASEMI
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "PA Semi SoC-based platforms"
- default n
select MPIC
select PCI
select PPC_UDBG_16550
Index: b/arch/powerpc/platforms/powernv/Kconfig
===================================================================
--- a/arch/powerpc/platforms/powernv/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/powernv/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -30,7 +30,6 @@ config OPAL_PRD
config PPC_MEMTRACE
bool "Enable removal of RAM from kernel mappings for tracing"
depends on PPC_POWERNV && MEMORY_HOTREMOVE
- default n
help
Enabling this option allows for the removal of memory (RAM)
from the kernel mappings to be used for hardware tracing.
Index: b/arch/powerpc/platforms/ps3/Kconfig
===================================================================
--- a/arch/powerpc/platforms/ps3/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/ps3/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -49,7 +49,6 @@ config PS3_HTAB_SIZE
config PS3_DYNAMIC_DMA
depends on PPC_PS3
bool "PS3 Platform dynamic DMA page table management"
- default n
help
This option will enable kernel support to take advantage of the
per device dynamic DMA page table management provided by the Cell
@@ -89,7 +88,6 @@ config PS3_SYS_MANAGER
config PS3_REPOSITORY_WRITE
bool "PS3 Repository write support" if PS3_ADVANCED
depends on PPC_PS3
- default n
help
Enables support for writing to the PS3 System Repository.
Index: b/arch/powerpc/platforms/pseries/Kconfig
===================================================================
--- a/arch/powerpc/platforms/pseries/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/platforms/pseries/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -28,7 +28,6 @@ config PPC_PSERIES
config PPC_SPLPAR
depends on PPC_PSERIES
bool "Support for shared-processor logical partitions"
- default n
help
Enabling this option will make the kernel run more efficiently
on logically-partitioned pSeries systems which use shared
@@ -99,7 +98,6 @@ config PPC_SMLPAR
bool "Support for shared-memory logical partitions"
depends on PPC_PSERIES
select LPARCFG
- default n
help
Select this option to enable shared memory partition support.
With this option a system running in an LPAR can be given more
Index: b/arch/powerpc/sysdev/Kconfig
===================================================================
--- a/arch/powerpc/sysdev/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/sysdev/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -6,19 +6,16 @@
config PPC4xx_PCI_EXPRESS
bool
depends on PCI && 4xx
- default n
config PPC4xx_HSTA_MSI
bool
depends on PCI_MSI
depends on PCI && 4xx
- default n
config PPC4xx_MSI
bool
depends on PCI_MSI
depends on PCI && 4xx
- default n
config PPC_MSI_BITMAP
bool
@@ -37,11 +34,9 @@ config PPC_SCOM
config SCOM_DEBUGFS
bool "Expose SCOM controllers via debugfs"
depends on PPC_SCOM && DEBUG_FS
- default n
config GE_FPGA
bool
- default n
config FSL_CORENET_RCPM
bool
Index: b/arch/powerpc/sysdev/xive/Kconfig
===================================================================
--- a/arch/powerpc/sysdev/xive/Kconfig 2018-10-09 17:32:25.059264623 +0200
+++ b/arch/powerpc/sysdev/xive/Kconfig 2018-10-09 17:32:25.055264623 +0200
@@ -1,17 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
config PPC_XIVE
bool
- default n
select PPC_SMP_MUXED_IPI
select HARDIRQS_SW_RESEND
config PPC_XIVE_NATIVE
bool
- default n
select PPC_XIVE
depends on PPC_POWERNV
config PPC_XIVE_SPAPR
bool
- default n
select PPC_XIVE
^ permalink raw reply [flat|nested] 2+ messages in thread