From: Matti Vaittinen <matti.vaittinen@linux.dev>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Matti Vaittinen <matti.vaittinen@linux.dev>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Matti Vaittinen" <mazziesaccount@gmail.com>,
"Marcelo Schmitt" <marcelo.schmitt@analog.com>,
"Joshua Crofts" <joshua.crofts1@gmail.com>,
"Radu Sabau" <radu.sabau@analog.com>,
"Janani Sunil" <janani.sunil@analog.com>,
"Salih Erim" <salih.erim@amd.com>,
"Jishnu Prakash" <jishnu.prakash@oss.qualcomm.com>,
"Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Jakub Szczudlo" <jakubszczudlo40@gmail.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] iio: adc: rohm-bd79112: Add chip info structure
Date: Fri, 20 Nov 2026 14:28:00 +0200 [thread overview]
Message-ID: <42cb719e8da3b07e3c5b9bc6347e95ea7a30511f.1795176984.git.mazziesaccount@gmail.com> (raw)
In-Reply-To: <cover.1795176984.git.mazziesaccount@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3966 bytes --]
From: Matti Vaittinen <mazziesaccount@gmail.com>
A new ADC variant, ROHM BD79111 is going to be supported by this same
driver. As a preparatory step, introduce chip-specific data and pick it
at probe time based on the spi-match data. This allows describing the
necessary hardware differencies in data structures, which tends to
result cleaner solution than some CHIP_ID specific switch-case blocks.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Revision history:
v1 => v2:
- Split the chip-ID introduction into own patch as suggested by Andy.
---
drivers/iio/adc/rohm-bd79112.c | 45 +++++++++++++++++++++++++++-------
1 file changed, 36 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/adc/rohm-bd79112.c b/drivers/iio/adc/rohm-bd79112.c
index 2506fec7be84..04084e88984a 100644
--- a/drivers/iio/adc/rohm-bd79112.c
+++ b/drivers/iio/adc/rohm-bd79112.c
@@ -26,7 +26,15 @@
#define BD79112_MAX_NUM_CHANNELS 32
+struct bd79112_data;
+
+struct bd7911x_chip_data {
+ const char * const *chan_names;
+ int (*init_disable_gpios)(struct bd79112_data *data);
+};
+
struct bd79112_data {
+ const struct bd7911x_chip_data *cd;
struct spi_device *spi;
struct regmap *map;
struct device *dev;
@@ -398,6 +406,19 @@ static unsigned int bd79112_get_gpio_pins(const struct iio_chan_spec *cs, int nu
return gpio_channels;
}
+static int bd79112_disable_gpios(struct bd79112_data *data)
+{
+ int ret;
+
+ for (unsigned int i = 0; i < BD79112_NUM_GPIO_EN_REGS; i++) {
+ ret = regmap_write(data->map, BD79112_FIRST_GPIO_EN_REG + i, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
/* ADC channels as named in the data-sheet */
static const char * const bd79112_chan_names[] = {
"AGIO0A", "AGIO1A", "AGIO2A", "AGIO3A", /* 0 - 3 */
@@ -410,6 +431,11 @@ static const char * const bd79112_chan_names[] = {
"AGIO12B", "AGIO13B", "AGIO14B", "AGIO15B", /* 28 - 31 */
};
+static const struct bd7911x_chip_data bd79112_chip_data = {
+ .chan_names = bd79112_chan_names,
+ .init_disable_gpios = bd79112_disable_gpios,
+};
+
static int bd79112_probe(struct spi_device *spi)
{
struct bd79112_data *data;
@@ -425,6 +451,10 @@ static int bd79112_probe(struct spi_device *spi)
return -ENOMEM;
data = iio_priv(iio_dev);
+ data->cd = spi_get_device_match_data(spi);
+ if (!data->cd)
+ return -ENODEV;
+
data->spi = spi;
data->dev = dev;
data->map = devm_regmap_init(dev, NULL, data, &bd79112_regmap);
@@ -476,7 +506,7 @@ static int bd79112_probe(struct spi_device *spi)
iio_dev->channels = cs;
for (i = 0; i < iio_dev->num_channels; i++)
- cs[i].datasheet_name = bd79112_chan_names[cs[i].channel];
+ cs[i].datasheet_name = data->cd->chan_names[cs[i].channel];
iio_dev->info = &bd79112_info;
iio_dev->name = "bd79112";
@@ -488,12 +518,9 @@ static int bd79112_probe(struct spi_device *spi)
* without having to worry about some pins being initially used for
* GPIO.
*/
- for (i = 0; i < BD79112_NUM_GPIO_EN_REGS; i++) {
- ret = regmap_write(data->map, BD79112_FIRST_GPIO_EN_REG + i, 0);
- if (ret)
- return dev_err_probe(dev, ret,
- "Failed to initialize channels\n");
- }
+ ret = data->cd->init_disable_gpios(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to initialize channels\n");
ret = devm_iio_device_register(data->dev, iio_dev);
if (ret)
@@ -523,13 +550,13 @@ static int bd79112_probe(struct spi_device *spi)
}
static const struct of_device_id bd79112_of_match[] = {
- { .compatible = "rohm,bd79112" },
+ { .compatible = "rohm,bd79112", .data = &bd79112_chip_data },
{ }
};
MODULE_DEVICE_TABLE(of, bd79112_of_match);
static const struct spi_device_id bd79112_id[] = {
- { .name = "bd79112" },
+ { .name = "bd79112", .driver_data = (kernel_ulong_t)&bd79112_chip_data },
{ }
};
MODULE_DEVICE_TABLE(spi, bd79112_id);
--
2.56.1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2026-11-20 12:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 12:26 [PATCH v2 0/3] Support ROHM BD79111 ADC/GPIO Matti Vaittinen
2026-11-20 12:27 ` [PATCH v2 1/3] dt-bindings: iio: Support ROHM BD79111 Matti Vaittinen
2026-11-20 12:28 ` Matti Vaittinen [this message]
2026-11-20 12:28 ` [PATCH v2 3/3] iio: adc: rohm-bd79112: " Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42cb719e8da3b07e3c5b9bc6347e95ea7a30511f.1795176984.git.mazziesaccount@gmail.com \
--to=matti.vaittinen@linux.dev \
--cc=andy@kernel.org \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jakubszczudlo40@gmail.com \
--cc=janani.sunil@analog.com \
--cc=jic23@kernel.org \
--cc=jishnu.prakash@oss.qualcomm.com \
--cc=joshua.crofts1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt@analog.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
--cc=nuno.sa@analog.com \
--cc=radu.sabau@analog.com \
--cc=robh@kernel.org \
--cc=salih.erim@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®